Dissassembly and Reassembly 88-91 Chevy Moonie Gauge Cluster
Vložit
- čas přidán 28. 07. 2015
- The process of taking apart and putting back together the Moonie Gauge cluster that is typically found in the 1988-1991 Chevy and GMC fullsize trucks.
- Auta a dopravní prostředky
I have a 91 with the moonie cluster and this is exactly what I needed to see thanks for the video
Great video. Unlike any video I’ve seen on the inter set about this. Thank you
Good video. I have a question how can you turn off the Check Gauges light it turned on right after I did an LED swap with the light bulbs I can't figure out what I did wrong I follow all your steps. Thanks In advance
Question, on the moonie, my trip meter stopped working and wont reset. The odometer works fine. Would you know what could cause the problem with the trip meter? Any ideas?
Great video! I will definitely follow the steps you outlined. Question? Do you know where I can get the stepper motors to repair the gauges? I have the Mooney cluster and the speedometer only works sometimes, the water gauge never works, and the gas gauge always reads between 1/2 and 1/4 tank. I'd like to replace them but have no idea where to buy. Can you help?Thank you in advance.
I have a Moonie cluster in my 89 K2500. Some times the speedometer will work, some times not. Oil pressure gauge stays all the way to the right all the time and the dash lights don't work. other gauges seem to be fine. Some times the temp gauge will flip between the cold mark all the way to the high mark when the turn signal is on but hasn't done that in a while. When I turn on the head lights the lights for the heater controls go out. I think it's a ground issue. Any ideas?
I need to repair my temp gauge but cannot find the stepper motors need more info on how to repair or where I can bye motors
is there anyway to clean the white lines that fill up the gauge? mine are from 88 and aren't as white as yours
nice video bro i have a question i have a 1990 gmc c1500 with that same cluster but my fuel gauge dont work do you know what it might be ?
I have a 1990 chevy truck with the mooie cluster. My trip stops working at 270.9 does it probably need cleaning? The odometer works fine.If so, how do I clean it or fix it, Thanks..
Does this fix the miles and the speedometer
so where can you get the gauges from
wow I have 1991 chevy 1500 the miles odometer and the gear shift indicate don't how do i repair them.
Question. My gear indicator quite moving. I mine was clipped on the plastic peice on the steering column, but it is not connected inside the gauge cluster as the one appears to be inside the cluster in this video. Can you tell me where to connect it inside the cluster?
+Bass Wars There is a slit in the plastic on the cluster housing. That is where the gear indicator wire goes thru and it connects to the indicator itself indide the cluster. If this wire is broken the indicator will say Park until the wire is fixed.
I have an 89 with moonie clusters and the speedometer is off by 20 and the gas guage don’t work
Good video. Gonna use this to help troubleshoot my fuel gauge on my 88 k1500. Do you happen to know on the gauges what terminals are power ground and signal?
Me too...same deal...
Hey mate good video . I have a 1988 gmc 1/2 ton and wonder what year clusters can all be interchanged with this truck . As in if I can not find the same cluster what other years will work in my 1988 ? Cheers mate
mrnapolean1
Dakota digital😃
Kiwiv65
Dakota digital😃
question. i reconstructed the motor and transmission on my truck.and i would like to know, how would i be able to change the odometer.is it manually? or what would be the best
I have never messed or tampered with any odometers in any cluster. But by looking at it it looks like the only way is to advance the odometer manually until it turns back to 0. I may be wrong on this though....
Has anyone successfully fix the odometer? Please help if so
My moonie cluster goes all haywire and the gauges flip all the way over and the hazards come on y is it doing this
Are all the light bulbs the same? What is the light bulb name or serial number? ,,, or part number?
Have this same cluster in my truck, just sent to the shop thought it was fuel pump/send unit, but all checked fine was informed it was something in guage cluster, now would that be on the fuel guage section that you popped out or would that be on the big circuit board? What are your thoughts?
Do you think contact cleaner might fix the problem? My oil pressure also goes crazy
When my tank is full the guage reads 3/4 and goes down as gas is consumed
How do you change the settings for tire size on the cluster?
Daniel Lipinski
DAKOTA digital😃
where can i buy the led light bulbs for the moonie cluster? And what size or model number are they? Thanks in advance, and great video!
I used these for my backlighting and some of the indicator lights: www.superbrightleds.com/moreinfo/instrument-panel-light-bulb/194-led-bulb-5-smd-led-tower-miniature-wedge-retrofit-car/206/
What color look the best?
mrnapolean1 will these led's work in my 1998 Chevy truck with the moon cluster??
Hey bro im looking for a cluster for my 91 silverado but im having alot of trouble finding jt .. i was wondering if u knew a place where i can buy a 91 needle cluster the one that has the same connector as the later models ..
91 was the last year to have that style connector. 92 -94 had a different plug on them.
Trying to find the forum thread that had a lot of useful information. will post it here when I find it.
mrnapolean1 , hey I have a 94 Chevy can I replace the tach cluster with the moonie type and if so how? thanks
What can I do to put a 91 moony cluster on a 94 chevy truck ck?
mateollios 67 those moonies are constantly breaking.
Why would you want to do that? Moonie gauges offer no factory tach (that I know of) and are consistently breaking and sticking.
I have the 91 Moonie and it works just fine but I hate the look how the hell do i switch it to needle tach clusters?
the million dollar question. How do you fix the odometer on the stupid moonies?
Is it the odometer or the trip? The Trip and Odometer are connected by a spring like connector. If that breaks (and it commonly does) the trip will no longer turn. If the Odometer isnt turning the trip wont be turning either. The little stepper motor would be a good start.
mrnapolean1 is that a specialty part? Is there a specific motor, or are they all practically the same
mrnapolean1 some people say they just get jammed, and will work again if cleaned
They look like they would interchange between clusters but I never tired that.
You can also try that.
Nice video, I have a Moonie cluster and the marker on the speedometer just stops marking and falls back down to zero, I can knock on the cluster and it will work again, do you know what I could do to fix that? thanks in advance.
Franky Vera none of my gages work.. what did you end up doing.. I have a 88 also
The stepper motor may be weak or has gone out.