KTM 390 Adventure: SRC Accessories Install - Crash Bars | Rear Rack | Headlight Guard
Vložit
- čas přidán 10. 09. 2024
- Nat & Josh spend an arvo in the MVDBR Batcave installing some sweet new gear from SRC Adventure Moto onto Nat's KTM 390 Adventure. We fit the larger kickstand foot, headlight protector, rear luggage rack, and finally the crash bars. We're very impressed with the overall fit and finish of the SRC gear, even though there were a couple of minor hiccups. Huge thanks to Tony from SRC for supplying these great products.
Check out srcadventuremo...
Actual install videos from SRC:
Headlight Guard: • KTM 390 ADVENTURE HEAD...
Rear Rack: • KTM 390 ADVENTURE TOP ...
Crash Bars: • Video
Our Website: mvdbr.com
Get Merch: mvdbr.com/shop
Support Us: / mvdbr
Amazon Store: www.amazon.com...
Instagram: / mvdbr.enduro
Facebook: / mvdbrenduro
CZcams: / mvdbr
We use & recommend:
Goldentyre Tyres: www.goldentyre...
B&B Off-Road Accessories: bboffroad.com.au
SRC Adventure Moto: srcadventuremo...
Nelson Rigg Gear: nelsonrigg.com.au
Komine Jackets: www.komine.com.au
Olight Torches: www.olightstor...
Josh: 2020 Yamaha Tenere 700
Nat: 2020 KTM 390 Adventure
Cameras: DJI Osmo Action | Canon G7X Mk II
Looking like a proper weapon now, nice spannering Nat 👍. Glad Poindexter was there for a bit , he's a knowledgeable fella to have around.
HOYVIN-GLAVIN 🤓
Great job Nat and Josh
I agree with you guys total, SRC stuff is well made & fits perfectly
plus the service from Tony is Top Notch.
I'm still waiting for it to stop bloody raining here in Vic it's been three weeks now & the bike still has only 1km on it, it will stop one day. Enjoy!
He goes alright for a lousy Saffa 😅👌 Cheers mate yeah the weather lately leaves a lot to be desired, even qld been decidedly ordinary 😣
Nice vid, always great when parts for your bikes arrive. Great seeing Nat back on the tools.
🙌
We shoulda waiting just a little longer. That headlight guard looks way better than the one we went with🤙
Which one was that?
@@MVDBR ADV Tribe. Doesn’t look much different but the quick detach is so much better.
Good stuff
I like the way you put the lock tight on the right end of bolts not like some other you tubers
🤦♂️ haha cheers man
Hello Josh and Nat, so good to see the Vid on how to put all the sexy gear on the bike, well done Nat on the tools, all good fun. Enjoy! David...Adelaide SA Tiger 900GT...
That is some super great quality products,very impressive and looked nice and easy to fit .
Well done guys 👍🇦🇺
That torque wrench was hilarious haha, cripes!
Steady on mate 😅
WOW... that's the best looking KTM ever Nat! Really love that rear rack too... Looks bloody Awesome. Well done guys or should I say Bloody Ripper Job! Cheers... Mark
Bloody Ripper indeed 😁 Cheers Mark
When you tension something, just make a click noise…. Works for me…. Or tighten until it strips then back it off a turn 😂😂🍻
15 NM is 2 veins popping in the forearm.
Haha love it, that's pretty much how we operate 😁👌
Time to go test it out Nat .looking good 👍🏻👍🏻
Stay turned for that 😜
Nice, all that gear looks rock solid, really like the rack with the grab handles!
Looks awesome guys, great job 👏.
Regards,
Dazza. 🇬🇧
Cheers 🤙
Pfft you don't need a torque wrench when you've got T bar spanners . That little 390 is the shizzle solid effort guys . 👍
I don't think my actual torque wrench has even seen the light of day since I bought it back in 1994 or something like that 😅 Thanks for watching mate
Such a sweet looking bike luv it 🤟🍺
I went with the AXP rear rack after seeing it in your channel. It definitely has some flex to it, but works for me since it has more areas to strap on to. The slots on the side are well spaced and don't slip backwards or forwards with my net thing on them as they would with this rack or the stock hand rails since nothing is holding them fore or aft.
Yeah the AXP does the job that's for sure. Have yet to test out the SRC but I think it will be fine 👌
@@MVDBR It looks like it will do the job handily. I might have to get the headlight guard next, it looks like a nice piece of kit.
After watching your video I just got the src rear rack and crash bars. Can say one thing its easier to fit the crash bars if you have a 2nd set of hands.
Yeh everything is easier with a bit of help. They were a lot easier than other crash bars I've fitted though!
Just purchased a bunch of parts for my CRF300L that still hasn't shown up yet :') Cheers for the code guys, saved me the cost of shipping pretty much! Uploaded my little box of goodies!
Yew 😎
Nat's racks are looking good. Lol. Good job guys the bike is awesome.
Being the Anal Torque wrench guy that I am, I was very impressed with your settings and the Torque wrench tool that you both use. Another top instructional video, and great to see the accessories for the 390.😀💀👍
You torque wrench guys are always the life of the party 😎👌 Thanks for watching FPP
@@MVDBR🥳🥳🥳
That rack is a quality piece of kit!
Hey guy's...nice gear you got from SRCMoto, and I hate to be picky, but not too impressed with the 4 bolts that hold the main rack to the frame :(...would have been nice if they were flush with the rack, instead of sticking up a few mm.
The ones that hold the luggage plate on? Yeah you're right it would be nice if they were countersunk or something but that would mean the plate would have to be thicker material, but that wouldn't be a terribly bad thing 🤷♂️ thanks for the comment Geoff 🤙
@@MVDBR Hey Josh, yes, sorry the luggage plate....I've noticed that the majority of SRC's racks have this mounting system, which in my opinion kinda limits what you can strap to it. for example a small jerry can. I'd also be concerned that if you had some "luggage" or soft pack's, that those raised screws could wear a hole in them. I have a B & B rack, and the holding bolts (which are countersunk bolts), are countersunk into the luggage plate itself, which is 4mm thick. I would very much doubt that if you decided to countersink Nat's, it would look a lot neater, and I doubt that it would compromise it's strength. Just looking at the clip as I'm writing, it's NOT going to crack....might even see if you could not use those little spacers underneath.
Anyway M8, that's my 10 cents....maybe a job for an upcoming Batcave Friday !!! Cheers.
Love the channel guys, took Mark's recomendation from Biker Bits!
Great stuff!
Awesome guys. 390 Looking the goods Nat 👌
Beefy looking crash bars and rear rack. Looks like some good quality solid gear and the side stand bigger foot things are really handy too. Shame they don't make anything to suit my 1090
Oh true mate I thought they'd be all over the 1090 gear, does kinda seem like they do a lot more Japanese bike stuff though
that is some tight gear from SRC Adventure Moto eh!
big beefy grab handles on the rack and those crash bars, sweet dealio!
nice edit brother, dig the tunes picked for the slow mo sexy b roll eh,
B^D
thanks for sharing your time and expertise with us all,
wherever you may be brothers and sisters,
here is to the day smiling kindly upon us all eh,
see yous next fuckin' video!
B^)
All my comment replies got deleted what the FUCK youtube 🤦♂️😢
Nice job. I got to get that kick stand large foot print, always worried about falling over in dirt.
The only problem is how straight up the bike stands as it is, don't know if yours is the same but this one doesn't lean much at all on the stand and adding more height to the stand itself makes it a little worse. Luckily it's only a couple of mm
top notch job guys, looking great and functional
The design looks inspired by Zana Crash Bars for KTM adv390 from India.
I love you guys....👍👍👍👍
These crash bars look the best ive seen. I havnt got my bike tet but these items are hot on the list. Have subbed you guys as loving your vids. And that your in Oz as well.
That looked like a bit of work for the crash bars but good protection, Ktm’s looking good 😜👍🤘🏻piece of resistance 😂
Damn that Lego movie 😖😅
✌
Have added up what the cost to build the 390 to this stage would be, bet its scary, might be worth a video on both bikes 🤔
Close to 5K USD
It would be a fair bit, but the only thing extra that the 390 really needs over any other bike is the wheels. Granted they are a big cost though 😬
Great 👍 job Josh and Nat , that was a good torque wrench 🔧😂😂😂. I’m the same never 👎 one ☝️ my brother in law ALWAYS does for just about every bolt - painful 😖 to watch 😂. He is heavy handed he wreckens . I’m installing new crash 💥 bars today ( SM- Motech ) for my Yamaha 660.
Yeah ya gotta have that fine touch aye the inbuilt forearm torque wrench is pretty good most of the time 💪 Yew rock on the 660 👌
@@MVDBR Funny how you get the perfectionists ( not having a go - takes all types ) i last bolt I snapped off when I was 14 on my YZ 80 J “ back in the day “😂😂. Yer I’m a bit of a Yamaha fan boy 👦. Was looking at the T7 , in the last 6 years have brought 4 new bikes 🏍 a lot of money I have lost on resale, so last 2 have been second hand ✋ with low kms . I also do most of my own maintenance anyway. I trick I learned before you sell a bike take ALL the accessories off and sell separately. “ helps fund new ones for next bike 👍. Take it easy guys look forward to your next vid .
Nice job. Off topic question when you replaced the 10 lbs of muffler with a short mid pipe to connect exhaust together did that have much effect on bike performance??
I'm surprised Nat didn't answer this but maybe she'll chime in with her thoughts. I don't ride it enough to know really but I did ride it before and after and I didn't notice any difference other than it being obnoxiously loud after 😅
Hey Nat, that headlight protector makes the ugly KTM headlight look OK!!!
Hey guys! Would you say the Ktm original crash bar is enough for your style of riding if you didn’t get the beefy upgrade of crash bars?
Or would you throw money into a new set of beefy crash bar and remove the original ones?
Thanks!
@@MVDBR appreciate the reply!
No worries... my last few replies to comments seem to have disappeared for some reason 😮
Haha, the unwrapping probably took longer than the installation.
Good gear.
It did, 3 beer job in itself! 😅
Dont make my mistake, as you will end up losing that sidestand foot like I did. Put some RED loctite on those bolts even though they are probably nylon lock nuts, as I had blue loctite on mine and they still came undone on a long ride and i then had to buy another replacement foot. I made sure I used Red the second time around.
Aye, thanks for the tip!
I was sitting here feel in sorry for me self started watchin you meddilin with the 390, and I thought "fuck it get yer act together ya wussy" (I had a tripple by pass 3 weeks ago) and one week ago I dived on a 21 tenere "like hens teeth over here (Ireland) so me bark busters came today and cross brace for the bar's so off I went to the cave and fitted the lot, not that easy when yer waitin on yer chest ta crack open again, but I got it done, ya gave me the get up and go to attack, and lucky for me when I ordered the stickers off ya,s I ordered two sets so now I have the only T7 in Ireland with mvdbr stickers ( woo hoo) took a few pics but can't put them up here ?. Keep up the good work love the bikes and yer sence of humour not feel in sorry for me self any more. (Ps the names Christy last time ya thought I was a girl) have a good one Josh/ natt) I'll stick up a few pic for ya,s when I figure out how even the gory hospital one's all I have ta do is wait another 3 weeks before they,'ll let me drive the T7, good luck "and may the wind at yer back always be yer own"
Christy (male)🤒
Fuck mate I typed out a 100 page reply to this and it disappeared. Good times, thanks CZcams. Get well soon mate and we'll not forget your gender anytime soon don't worry 😅
What mirrors are you running on the KTM 390?
I'm running the double take mirrors
"DOUBLE TAKE MIRRORS - TORI MOTO" torimoto.com.au/collections/double-take-mirrors
@@390advmotochick7 from memory you ran DRC mirrors before, why did you end up changing to double take?
I was running the DRC mirrors and didn't have a problem with them. We changed them to double takes as they were generously gifted to us by the amazing Tori herself 😊 and they are a great product
Except for that DRC one that like, snapped off when you went over that erosion mound that time 😬
Again just watched you on the big screen .your both great .I installed SRC stainless crash bars on my 22 T7 and Wednesday put the SRC rear rack yes it looks great pretty simple to install and Nats bike looks awesome and one thing you did mention the little joint pipes that go in there yes I noticed those little 4 mm button Head Allen's not very deep for the Allen wrench I left mine in but I will put stainless Allen heads in mine when I take them off or if I have to and know have the Kriega 9 back pack. Awesome. !
Yeah man those supplied fasteners aren't the best 😬
Great video guys, can you tell me which radiator guard you have fitted to the 390 with thoses SRC crash bars please
It's the rad guard from KTM 👍
Hey Guys
Love your work - quick question - did the crash bars create any vibrations or change the dynamics of the engine
None that she's noticed mate, cheers ✌
Good video, a bit of protection is always a good thing 😁
I'm going crazy protecting the 790, with upper and lower protections but a lower one has come to me wrong and I've spent many hours to not be able to mount it, let's see if they solve it although they are taking it too slowly 😩
Was it for another bike?
@@MVDBR I believe that a part is wrong, it cannot be that everything but one screw matches. If I remember I Will send you the url of the video that i recorded. They are making me dizzy, They have even asked me for the documentation to check the exact model of the motorcycle........
@@arruntus what brand is the gear mate?
@@MVDBR Motea, Germán, url in instagram
The crash guard will make a perfect place to mount nitrous oxide bottles. One on each side. I've never seen a KTM 390 Adventure with nitrous. Yours could be the first on earth!
😅
Are you just testing that rear rack? Doesn't look like it is currently offered by SRC
Not sure what the deal is mate I thought these were all final versions of these products, will let yas know when we find out availability 👍
if your doing your own filming it becomes a 5 beer job
Not wrong, and then some 😬🍻
Блин, очень много пересмотрел разных видосов на разных каналах и вы одни из немногих, где на всех видео стоит 2-3% дизлайков. Я нифига не понимаю, что вы говорите, но мне чертовски приятен ваш контент.
2-3% - это хорошо или плохо? Спасибо за просмотр 👌
@@MVDBR это превосходно.
🙌
What seat are you guys running here? Thanks
That was the power parts rally seat
Nice video and workshop. But a bench grinder on top of your workbench? Near the bike and clean workbench, seems not very well thought in my opinion? Bench grinder should never be in a clean workshop, possibly contaminating your nice and clean work. Besides that after using this bench grinder, cleaning consumes precious KTM driving time for NAT. And what about respiratory dust?
👍
Looks like you might be running an AXP Racing skid plate... i wasn't aware they made one for the 390. Did you retrofit/ was it meant for another bike, or does AXP offer that now?
No they used to have them listed on the website, don't know why they stopped. Although it wasn't very good, melted onto the exhaust header going over obstacles because it wasn't very well mounted. Ended up replacing it with a better alloy one from B&B bboffroad.com.au/product/bash-plate-ktm-390-adventure-r-2020-2022/
More Beer she'll get the kick stand Pad
🍻👌
Great video again! I have 1 question. I own a 390 adv and i am 192cm tall. If i put the 1 piece ergo seat do i have to rise thw handlebar? I use the bike mostly on the road. Thanks a lot for your time!
Depends if you're comfortable, if you're riding on road you probably won't be standing up much so I don't think you'd need risers 🤷♂️
Sweeet :)
Love your content guys. What audio recording mic do you use that you had recording with your phones?
Thanks Patrick it's just a cheap lav mic, called a Purple Panda amzn.to/3raW7wy
@@MVDBR Thank you. I appreciate you taking the time to answer. Do you have an iphone or android?
@@patrickbrandon549 no worries, phone is Android, Samsung galaxy
What strength thread lock did you use for the top rack and stand ?
Removeable 👍
@@MVDBR thanks 🙏
@@MVDBR how’s the SRC crash bars holding up? Thinking of ordering them next are you happy with them ?
@@MyJoel333 tbh they are freakin awesome, I think they look great and the motochick has dropped the bike on them plenty of times with no bending or anything 🤙
How's prices on engine and suspension parts
Haven't had to buy any yet...
Thanks been looking at different bikes, I'm out in cape town za. Not sure what brand to go for
Always drinking
🍻