DIRT CHEAP Abandoned Pontoon! Can I get it Running?
Vložit
- čas přidán 5. 09. 2024
- I bought this pontoon boat for dirt cheap, but it's got some big problems... In this video you can watch me diagnose and fix multiple issues with this outboard's carburetors and get spark back to the ignition system. This old pontoon has been sitting for over a decade, but I am commited to giving it a new life!
Check out Strapinno's Ratchet Straps with the Link Below:
amz.run/9K1O
Make sure to use code: "BOATBUSTERS" at checkout for 10% off! This discount expires 8/30/2024.
------------------
Music Licenses:
uppbeat.io/t/j...
License code: XEZCSXBEGZWY6V5T
uppbeat.io/t/s...
License code: TC2SRXTSOBAR4Q5J
uppbeat.io/t/s...
License code: MSYBVJ3XHZKNFVDT
uppbeat.io/t/q...
License code: 5FOSSFHZSFSVVP8D
I just pop the carbs off automatically now on everything. I just put them in my ultrasonic cleaner. A little purple degreaser and something like lemishine for the dishwasher. It keeps you from getting water spots if you air dry and use tap water. The big one from Harbor Freight is amazing. I have only needed one rebuild kit since I got that. It was on a snowblower that had a crusted over choke flap. The parts were too pitted after a good cleaning. Ethanol gas just ruins stuff so fast lol.
Omg the part about wrenches and nuts disapearing is soo relatable😂
@@gabrielgagne2004 just a phenomenon science has been unable to explain….
LOL. "It was NOT there a minute ago" 🤣
@@troywayne8759 it swear it wasn’t 🤣
Yes same here lol I know I look there
This summer I have dropped two wrenches in the lake while changing plugs and coils on my outboard motor. Boating is expensive😂
Smart move on removing the oil injection. I had a marine mechanic that worked on boats for over 30 years tell me the same thing about failing oil injection on older units. Delete, and mix your fuel.
Great video
couple things. the kill switch lanyard is not tehre, disconnect from the harness and try again. Second, any key switch in those boxes can be started with a screw driver if you just have to. The switch itself will have a two or three digit number that you can take to a dealer and get a new key. There are not very many different keys for them so there is always a chance a key you have from another similar will work. Now, for the compression. The need is not within ten percent it is 12. However you are right, it was setting so after running it for a while and some fogging spray and it may come right back. Change the waterpump impeller etc. My experience? 54 years as a marine mechanic and repair shop owner. Retired now. You do good work son, keep it up.
Spot on sir
That's a bit overreached. It's only a small engine. It's not very complicated to fix. It doesn't need 45 years of experience to make any validation that you are an expert. I am a German, also a baby boomer Deuce engines mechanic and technician. I spend my time watching CZcams old engine rescuers. I don't preach, nor puff one's balloons. I just watched and feel happy for this new generation inspired and grow on this trade.
One video and I’m addicted. Great quality
@@BoatMan_ thank you so much man 🤝
That boat in Ohio that would go for $3000 - $4000 all day, these boats are extremely expensive.
@@jeffb7255 absolutely it will! I’m for sure going to sell it and make a pretty penny but going to have some fun with it first 💯
5:40 "Trouble Shooting process"? The ignition isn't even switched on! A great deal for you, nice one.
Ohhhh the outboards I could’ve fixed if you were around a few years ago. I can remember each and every one I gave up on and sold cheap. Thank you for giving me hope and inspiring me to carry on!
@@dreamakennedy4099 glad to be able to help!!! Thank you for watching
This dude deserves to have 200k+ subs forsure. Knowledgeable and entertaining 👌
@@GabrielPerez-fz4gu dude you just made my night! Hopefully one day. Till then I’m gonna keep pumping out videos doing what I love!
Not much of a challenge, now if it were a Merc or Suzuki it would be different. Junk the oil injection, mix yer gas 50:1 and that motor will last another 30 or 40 years
I actually do Marine repair for a liiving you did a great job on the engine dude hats off ! I am in the process of restoring a 1985 Scarab performance boat I just spent over two months rebuilding the engine I put in a nasty Comp Cam it has factory thru hull exhaust I hope the engine doesnt blow up on me when I fire it up and break in he cam no matter how many engines I rebuild I am always nervous, I am videoing the restoration on my CZcams channel it will be a while before its up . I am in my late 60s been in a huge rut for years I parked this poor thing out in the weeds in 2014 and let it rot this year its hell no no more I want to get out and start doing shit . People here in my town are cold and dont want freinds unless they can use you or mooch off of you. Got tired of boat alone and I just parked it . If everythign goes good my bucket list is to take the boat to Cerud'alene Idaho I want to boat and camp . I have never done this ever man never been there. I want this so bad I can taste it . I want to hear that nasty cam through my thru hull and blast across the lake and haul ass . I am a 21 year old in an old body I refuse to give up! Love the video man great job you scored dude! I found yoru channel by accident
@@madmanmechanic8847 thank you so much! You definitely can do it and camping is going to be awesome. Made sure I subbed to your channel so I can see it!! Cheers friend thanks for watching
Love the videos! This outboard doesn't have VRO though. It is called OMS (Oil Metering System). OMS, which was introduced in 1993, was known to be very reliable and if the pump did fail it over oiled by default. As long as the tank is free of water and the sock is not blocked, it will run forever. I run them on all my engines. VRO and OMS get a bad wrap from the 1st couple years of VRO (which were the only problem years). OMC then went to VRO2, which would also over oil in the event of a failure. There were bad oil injection systems out there, such as Mercury with their plastic gears, however since VRO2 OMC's systems have been very reliable. Most blame the VRO or OMS when they score a cylinder when in reality that cylinder went lean due to a dirty carb. If the VRO or OMS would have failed with a no oil condition, all cylinders would be effected as the oil is mixed before the carbs. To each their own but there are a lot of myths out there, plus if you have to replace the fuel pump I don't blame anyone for converting due to the high price of a new VRO or OMS pump.
@@EricGaskamp super interesting- you’ve earned my subscription! Thanks for sharing. Totally agree with what you’re saying- in my business of acquiring some cheap used boats to which I do not know the service history I tend to just opt to premix though… somehow helps me sleep at night 🙂
@@BoatBusters in your case I don't blame you one bit! Also thank you for the sub! When I get a "new" boat with VRO or OMS I always premix the first tank at 100:1, as a precaution, to make sure the oiler is working. That will at least save you in case the previous owner trashed the system lol. Then when i see the oil level is dropping as expected I'll go with straight gas in the tank. Keep up the good work! I always watch for your videos to come out!
@@EricGaskamp much appreciated man!!!!
That is/was extremely interesting and well done. Thanks. This from a 72 year old big ship marine engineer.
@@rodfair5698 really appreciate that!! Thanks so much for watching
Great deal on that boat. I wish more people would take the time to repair rather than just throwing stuff away. Please oh please replace that odious carpet.
@@deenorunda the carpet is going to go!! 🤣
Really have some fun with it first!
Had a 1991 40 hp Johnson VRO on my pontoon for 20 years & never had the 1st issue with the oil injection. Biggest issue was the tree that fell on the boat & destroyed the pontoons during Hurricane Michael. Engine still ran great. Sold it for $200 just to get it out of yard.
@@fmbbeachbum8163 shame to hear about the destroyed pontoon! And yeah, if I bought it brand new I would likely use it until I noticed issues. For me as someone who buys old used boats where I can’t really vouch for the history / maintenance record it just makes me feel better to premix and be 100% sure I’m getting good oil!
I’ve been loving your videos so far! All of the small moments of chaos that still happen to someone knowledgeable make me feel so much better about my days of chaos trying to fix an outboard for the first time this spring. I’m still a little surprised every time I get on the boat and it works now!
@@lianaraggio7935 thank you man! And yeah, there’s always chaos 😂 it’s unavoidable definitely don’t feel bad about it. Of course I cut out the parts that don’t look good (the hour I spent trying to retrieve the nut I lost)… it happens 💯
Mercury and Yamaha both introduced mechanical oil pumps in the early 80s. Around the same time OMC did. The main difference however, is the fact that they don't randomly fail and cause the outboards to randomly blow up like OMC's injection system did. There's absolutely no reason these VRO pumps should fail like they do and absolutely no reason we should have to delete them. The 2 other major outboard companies of the time were able to make their oil pumps extremely reliable. 1984, the year OMC introduced oil injection, is the year their quality control went to absolute shit and the year that started the company's downward spiral to bankruptcy.
@@UltraMagaFan2 couldn’t agree more!
Excellent work and information, thanks for sharing! Liked, subscribed and now commented. I took my harbor freight tools for granted and all of them fell into the void but my Mac and Snap On tools are magically faithful by my side.
@@Trudgewild I must admit the harbor freight tools are easier to lose… 🤣🤣 thanks so much for watching and for subscribing!!
An awesome and sturdy built pontoon boat. Can't wait to see what you do with it.... Joe
I understand about losing the nut and the wrench. I have gottebn to where when I work on something, I just take the first nut off and throw it as far as I can just to get that part out of the way. Great video. Thanks.
@@skydiver6711 😂😂😂😂 great idea
I really think you should hold onto this one. Almost unlimited interesting projects you could do on a budget and shoot video for your fans. Once you make her a little more attractive id install a roof....load it with solar panels, keep a small gas outboard and install a pair of high thrust 24v trolling motors on each side of the main motor. People are wacky for e-powered boats. Probably sell it for 12k. Take it to Vegas and bet it all on red this time :-)
@@danielalvarez7726 definitely holding onto this one for quite a few videos!!! Great ideas all the way around. And love the Vegas idea 🤣🤣 thank you for watching 🤝
Good lord..as a retired marine Engineer with about half your talent I think your site is awesome. Its not just a lot of good and interesting information but you present it in a really hilarious way. Hope to see whatever girlfriend you have around to share in all your adventures. Going to watch a bunch of these son. Good job!
@@danielalvarez7726 an honor to receive a compliment like this from you sir! Thank you! And she might make it on the camera one day 🤣😉
@@BoatBusters id love to see you really fix up the pontoon boat. Do you ever do anything with electric outboards? I'm thinking a roof on that pontoon could hold a lot of solar. Probably too much $$$ involved but it would be interesting.
@@danielalvarez7726 couldn’t agree more. Beyond trolling motors I really have no experience with electric, but this is a great idea
@@BoatBusters well...your an accomplished engine mechanic and do really well troubleshooting. Solar is really basic electronics. Might be something you want to play with later. I have a old 22 ft c-dory pocket cruiser. Main engine is 90hp Yamaha. I built a bay roof on it that I'm going to put a flexible 200 watt panel on. Solar controllers are cheap and I plan on replacing my 10hp kicker with a 3hp equivalent 36 volt emotor. Made for kayaks. I do a lot of crabbing and I plan to use it to troll my trap line and also just to learn about it.
Yes the corrosion on the electrical connection looked like dry dielectric grease but I enjoy your videos keep them coming👍👍👍👍🚤🚤🚤🚤🚤
For your no spark get some blue shower contact spray and hit all your ignition points. It will clean any possible electrical carbon on the firing points needed for spark.
@@user-ok3zf1go6c great tip appreciate it!!
Recently found you channel, instantly one of my favorites. Awesome content educational and fun. Can’t wait for your next vid!
@@Sonic-dk2wx thank you so much 💯 more coming soon!
Can’t wait to see what you do with this one!!!!
Having owned numerous 2stroke motorcycles and mopeds for years i fully agree with you about ditching the vro and using premix. Less moving parts = less chance of failure
@@lesheath6216 you got it 💯 and people spend more time arguing with me about it than it takes to premix their tank 🤣
I have a 1958 3hp JW-14 Johnson outboard motor from my sense passed best friend. We have used this continuously over the years and put it through lots of neglect. Now that’s it’s been I trusted into my possession I’d like to restore it. I’m hoping you come across one of these small vintage outboards and make a video on it. Maybe this comment will give you some inspiration lol. Any way I like your channel and I’m interested in learning how to work on these small outboards with the help of your videos.
Good motor I had a 90 that had been oil pump deleted
I think you're spot on by disabling the oil injection. Thanks for sharing your experience. Appreciate ya
VRO systems are common fail points and usually you don't realize it until the damage is done and you're running it without oil!
@@jkalland07they don’t understand oil or no oiling when they go bad. That’s a big myth. They will over oil when they go bad.
For the new CZcams channel you explained everything so well 👍👍 keep it up 💯
First thing I did on my 2007 Yamaha 50ph 2stroke was delete oiling system and mix it straight motor runs like a top 50to1 mix and roll
@@richardliddle6442 best thing to do for sure- (although Yamahas oil injection systems were much better than OMC)
I'd squirt some dielectric grease, or white lithium in those electrical connections that you disconnected.
A little extra water protection.
Luv those old 2-strokes
Dude you just gave me a big smile when I saw you upload! Keep up the good content like that!!! Love it!!!
@@shinzo222 thank you man 💯
Awesome video and great potential with this pontoon boat. As a former auto mechanic and current small engine mechanic I can relate to the missing and reappearing tools - supernatural forces indeed. Oh, and I don't trust 2 stroke oil injectors either. Back in 1981 I owned a 1975 Yamaha RD350B - the oil injector failed while I was riding home from high school. At the time, I didn't know enough about engine repair to save the bike, so I sold it cheap to someone who wanted the parts.
@@troyyarbrough it’s a strange phenomenon indeed! Thank for watching Troy
Great vids and info. I have rarely made money on car flips but always made good profits on boats and I enjoy working on them a lot more. My weakness is the motors so I really enjoy the detail you're putting out
Man! This is exactly what my outboard does... I haven't watched the rest of the video yet and I am on the edge of my seat!
Woo! I'm back! That celebration joy ride was epic and I am wondering what is lurking in the bowls on my carbs...
You should do a video on how to turn a 9.9 hp motor into a 15 hp motor. With speed tests before and after. Many Yamaha 9.9 motors are the same as the 15 hp models but with a limiter in the carb system.
Great editing, lovin your sense of humour. Thoroughly entertained!
@@mikel5992 appreciate that a lot thank you!!
Awesome video man! I appreciate the breakdown behind your thought process on diagnosing everything
@@Hatedepot Really appreciate that!!
Friggin love the channel! No BS, humorous corny jokes, entertaining and educational! Also, NGL u kinda look like Josh Allen 😂
Subscribed.... liking your channel ✔️
Great video I just wish this video was posted 5 years ago when I bought my first fixer-upper pontoon boat. Had the same problems and 1 cylinder had very low compression I took it to get repaired and $3500.00 latter it still wasn't right ended up getting rid of it. Anyways new subscriber to your you-tube channel and look forward to your videos. Aloha from Kansas
@@martinquintana5837 thank you so much for the sub and the kind words man, I appreciate you!! - and sorry to hear about your motor!
I saw the black cat steal your wrench !
@@user-dk3gb5xr8z I knew it 😂😂
Can confirm. Tools vanish immediately after placing them down
💯
Those 90s 50hp Johnsons are fantastic
@@peterjensen6844 some of my absolute favorites
Great content! I play with boats for a living but my life involves salt water. More corrosion bigger fish! Keep up the videos!
@@tomeckhardt5406 thank you!! Hoping one day soon I can be on salt water as well…. I love corrosion 🤣
Nice little Rivera Cruiser the outboard is worth what you paid for the whole package.
@@faronmastin8683 absolutely 💯 appreciate you
Love your videos, very interesting love those outboard motors videos, quick flip
Great videos!
Great video and perfect integration of the ad!
@@troywayne8759 really appreciate that 🤝
Great video man! Enjoy your narration on motor repair!
@@redbyron10 much appreciated!!
Your tagline should be Find, Fix, Flip
Custom Boats
Finding a boat at the right price, without big flaws is your biggest advantage imo
@@glampocro1688 you might be onto something here 🤔
Nice fishing plattform, wish i had one too. What measurements does the platform have? I feel with you bout the heat, we have 65°F today and im melting since im an ancestor of snowstorm and frost😅
Cheers from Sweden.
Congrats about the sponsorship brother! Love the content, you deserve it bro
@@notere3342 thank you for that support man that means a lot to me!
Another quality vid brother I just cleaned the carbs on my jhonson tracker40 today, you gave me confidence to tackle it
@@pabloandrs6141 thank you my friend 🤝 it’s not too hard!
@@BoatBusters well you make it seem easier than it is tbf 🤣
@@pabloandrs6141 it’s definitely a pain… but (hopefully) not a day ruiner type of project haha
Great channel mate. Excited for more videos
Thank you 🤝
I want to stumble into a find like that… just to turn into a small houseboat.
I just boat busted all over the place after seeing how much you got that for 😭🙏
@@DirtHouseBoi Lmaoo this one wins 🤣 definitely was a steal though
Newer Johnson evinrudes don’t have VRO, it’s their OMS oiling system which is essentially failproof
Awesome. Make 200 more videos like this and I will watch every one of them.
@@gsftom on the way 🫡🫡🫡
😮wow that motor purred more then a sleeping kitten....
Good job getting rid of that VRO.
black cat took the wrench
@@EverCreateStudio definitely 😂😂
That boat is so cool
Love the video. If you like to fish we would love to see you wet a line and catch some fish off the beautiful boats. Just makes the ending that much better. Keep em coming.
@@williamhines5829 thank you for that! Definitely want to mix in a bit of fishing content from these boats but also wanted to make sure people were getting the content they subbed for- so I appreciate that!
Quick story about missing wrenches (AND PARTS) Had a huge job a few decades back where a youth group was having a summer camp. We took in their boats for complete refits and overhauls of the engines. One needed a complete rebuild. I had my crew doing the upholstery while I had the engine in the shop on the workbench. Nothing else there. Split it in half, machined the cylinders, assembled rods with .010 pistons and laid out the crank and every internal part. Turned around and that crankshaft was gone. Nobody was in the shop area but me. Everyone else was working their butts off. That crank was there and then poof...it was gone. We all looked for it. Around the buildings, everyone looked on and under that workbench and went through the shop. No place to be found. (N, NOBODY WAS MESSING WITH US).... We walked to the shop doors, everyone. still gone, you could see from the double doors everything on that damn table.... We started to do another search outside and I looked back again... it was sitting right on the table where I had laid it hours earlier... you tell me. WTH lol..... Kinda like the 1/2, 9/16 and 7/16 sockets and wrenches that just go poof and then appear someplace you swear you never went to lol.... Anyway... keep up the good stuff....
@@daddski1 that’s hilarious 🤣🤣 heard of a lot of tools disappearing but this is the first time a crankshaft has entered the void hahaha.. thanks for sharing though that’s too funny
Flaming hot Doritos yep I've found those too 🙂 and that void in the time warp continuum no fun !!!
What do you think about doing a shock/decarboning treatment to clean up the carburetors on motor that's sat for a couple years?
Problem… JB Weld… Completely relate 😂
The mysterious case of wrenches that grow legs and run away. Still missing my 10mm socket from the void
@@Antique_Outboard_Revival The 10mm for some reason likes to hang out there more than the rest!!
Nice score on the boat. Now I am looking forward to the lipstick and-spit shine videos on make it right 👊👍
@@johnhamilton9229 soon!!!
Well hope you're putting a water pump after dry starting😅
The black cat....😂
... Subscribed w/a bell! Great video. It takes a lot to film while be frustrated working on something let alone in 95* temps.
Dropping nuts into the abyss. Losing tools, or did the spirits move them then put them back? :-)
There is a pontoon I pass by on my way to the ramp. It has been sitting in a person's yard for a few years now.
It would make a great catfishing rig. I would have an open deck with some seating in the center.
Rod holders all around the rails.
Yeah, I can see it now.
Thanks for the video.
Jeff
@@240LTS really appreciate that Jeff! Thankfully the mysterious disappearing tools also make their way back 🤣 you should buy it!! I love this boat definitely keeping it for a while!!
@@BoatBusters ... Looking forwards to more videos.
I know it takes a lot of time to, record, upload to the computer, edit, edit, edit, the post.
That's why I have sooo many videos I have not posted yet.
I should just do a very rough edit and post them. Better than not posting at all.
Thank you,
Jeff
@@240LTS definitely takes me a ton of time for sure… but it’s worth it to see the result I think!
First guess was 500 I bumped it up to 800 before he said how much.
1800 seems a bit high. But that's just my worthless opinion 😮 lol!
its looking like it will be a fun project regardless of the price.
@@truthorbust1545 😳😳 the trailer alone would sell for $1,000!!! Let me know where those deals are and I’ll be in the next plane over 🤣 thank you for watching
Great video as always bud! Real fun to see you getting sponsored! I love my boatbuckles. Would you say you need to replace the gear oil before starting a outboard that’s been sitting for a few years?
Cheers from Sweden.
@@k1ngre Thank you for that!! And yes you should always at least check to make sure there’s oil in there and there’s no water. I did do that just didn’t put it in the video. The engine will be fine to run one time on old oil but definitely should be changed before continued use!
@@BoatBusters thanks for the response! Video idea for the future: would love to see you adding electric start to an old rope pull-started outboard. A mod I want to do for my old 30hp -93 Johnson.
@@k1ngre Noted! 🤝
19:00 That's murphy's law
Great content....got my sub!!
@@neonnoodle1169 thank you!
You should have tossed that gray fuel hose the second you disconnect the line from the motor...
Party barj that ole girl!
I just found this video, I have had several boats through the yrs, now I have a 15ft bayliner capri that has been converted to a bass style boat it looks pretty cool I like the transom on this boat it has a 59hp force ourboard on it my son and I have had it in the lake several it runs around 65 70mph on the water its alittle dangerous to say the least ,anyway im like you on the oil system ive had one fail on me and blew the piston through the head,I do not trust the injectoin system type outboards at all, I do have concerns about my voltage regulator on my outboard how do check this I dont know too much about this force outboard are they a mercury product,
10:35 lol 😂
I enjoyed the video," nice buy and a great price. You know what your doing brother.
@@JuanSepulveda-d7s appreciate that my friend!
Great quality video.
@@travisschnelle4247 thank you my friend
Awesome video buddy! Keep up the good work
@@publicdefender77 thank you my friend!
Black cat made me laugh out loud
Houseboat conversion?
@@FreezyAbitKT7A don’t tempt me 😈
You're the next incarnation of @ThatBoatGuy. But with more clothing changes.
@@jibbymcbeet He’s been my favorite channel for years and definitely inspired me to start recording what I do so I consider this a huge compliment so thank you for that. But yeah, I really only have evenings and weekends to work on this stuff so gotta do it day by day! 🤣
Compression when you did your compression test, did you oil the cylinders first? Also change the lower unit gear oil
Any help would be nice I have a 1986 Yamaha 9.9 4stroke on a sailboat that idles great starts great runs great under low to medium throttle but any more than that it sputteres/ misfires and revs become surgy like I said any help would be appreciated those videos are great keep it up
@@patdemers7096 Thank you! It’s not getting enough fuel at high rpm somehow. Make sure you have a clean fuel tank, make sure it’s vented, good fresh gas, first clean the carburetors then check your fuel pump. Clean any fuel filters you have and look for leaks in the fuel lines
A request and I would watch also I’m subscribing to you cause this is good. So I would like to see the interior to be remodeled and put seats on it and put flooring instead of the ugly carpet if you did I would love that.
Surprised you didn’t say anything about the grey fuel lines. They always need to be changed out!!
Hopefully I can get a reply, I have a 1993 mariner 90 and I have been chasing an issue with fuel delivery. I’ve replaced all the fuel lines and a new fuel pump. New fuel line from the tank to the motor and it’s the good hose without the plastic liner. Any suggestions would be awesome!
@@Whatsitworthh it depends what your symptoms are / what the motor is doing that’s making you believe you have fuel issues. Send me a DM on instagram (same username) and I would be more than happy to help diagnose the issue with you!
It was sitting 10 years. Why didnt you go through the carbs before heading to the lake? Seems like a given to me
Awesome video brotha! Found your channel about a month ago and binge watched all your videos lol love the content! And yoo I have a quick question, I have a 1989 Johnson 28SPL and I just rebuilt my carb and fuel pump and also cleaned inside my metal fuel tank. My engine has never had an inline fuel filter(as far as I can tell) and there’s still a little bit of rust inside my tank on the top side walls, would I be okay to add an inline fuel filter to my motor as another layer of protection on top of the filter in the fuel sending unit and fuel pump? Would adding an inline fuel filter restrict fuel flow and cause me to run lean? Thanks for any help!
@@dean7416 really appreciate you my man! And no, an in line fuel filter should not cause any issues with restriction on its own (at least I have never had issues with it).. The only time you should see any problems come with it are if a bunch of rust and debris gets caught in it- this would restrict flow, so keep on eye on that!
@@BoatBusters Okay cool sweet thank ya sir! Any particular fuel filter you like to use the most? I’ve got a Sierra one but it’s an opaque white and not sure how translucent it is. Thinking a clear one would be a better option so I can keep an eye on it.
@@dean7416 I much prefer the clear ones for that reason! My local advanced auto parts sells them, the 3/8” size works perfect for most motors I add a filter to
@@BoatBusters my hose is a 5/16s so it’s been harder to find a clear one locally but I’ll go check around a bit more! Thanks again bro I’ll be looking forward to the next upload!
That boat wold make good cat fishing mushine
@@rexwright2386 don’t leak the next video 🤫
@@BoatBusters ok whin you post it on you tube
Great boat, I’m looking for a 16 to 18 foot pontoon like yours for under $2000
To fix up and keep for myself.
I’m in the Akron, Ohio area.
Can you give me any hints about where I can find something like your pontoon?
Thanks!
@@szivap any time you get on your phone, you have to refresh and check Facebook marketplace… have to be fast and have the cash in hand to get to deals like this one first! Typically aren’t live over an hour before they’re gone
How would changing the spark plugs affect a no spark condition? Also you said the ignition system checked out, did you mean the starter system?
@@tonyfox1434 spark plugs are part of my standard service and always get replaced anyways no matter the condition, so that’s always the first step for me especially during a no spark situation. You just never know- I’ve had no spark be caused by a bad plug before, I like to start with what’s easy and cheap! As for my comments about the ignition system checking out- yes, haha I meant the starter. Classic case of me talking too fast 🙂