Fix! Tacklife (and other) electric paint sprayer not spraying. Quick fix!
Vložit
- čas přidán 6. 09. 2024
- I've noticed a problem with this sprayer where it sprays air but no paint comes out, and I keep seeing it mentioned in comments of other videos, even seen people throw away their paint gun because of it. I believe it's a very simple fix that requires properly cleaning the right piece. Drop a comment and a like if this video helped you.
I had a different model of sprayer and this worked for me, Thankyou. 👍
I've bought the 1200w model, and I do think that the tube is identical, if it is, it can be disassembled and inside it has a small spring with a rubber membrane on top, and it is the check valve: the air can come in but (ideally) it can not come out, it also came with 2 more of those tubes, the only thing that I was not able to figure out yet is how to change the brass needle valve as it also came with another thinner one and that plastic tool that is supposed to be used to change those.
It's definitely tricky to change but it's essentially just held in with pressure. Once you put it plastic tool over it you just pull straight out.... Harder than you think. Yours could be glued in place with dried paint so maybe soak in a solvent first if you think it is.
Thanks for the tip !
Glad it helped
Hi did you manage to remove the tip ? I want to put the one made for the 1mm nozzle but I can't find how.
To remove the tip you need the T shaped tool that comes with it. You just pull straight out, it takes a lot more force than you think it should need.
@@joeny1980 Thanks a lot. I'm so scared to break smth. Does it have to be oriented in a certain way to unlock it before pulling ?
Guess nobody knows how to fix it. This is my 15th video on this subject and none of them work
I'm surprised it didn't work for you. It's possible you don't have the gun setup properly.
@@joeny1980 it’s setup right . I used it and it worked until I refilled it with paint, I cleaned everything and it still don’t work.