that is insane dude i mean i installed suspension front and back on my xiaomi and modified the software to limit the speed to 16 - 19 - 22 kmh and installed a 2nd battery and underlight sistem on my pro2 but this is on another level of moding a xiaomi you guys are legends that dont even look like a xiaomi anymore
Firmwares are such crappy with apps are worst part and so glad got my plans without using any firmwares apps and also have found select to run 24/7 without getting battery flat 😉🙏👌👍
Under the board, what is the capacity of the battery? what total capacity? and what is the range then? ;) 3" tires are noticeable as compared to 2" tires?
Hi again! Hi! One more question: I would like to mount a 10" x 3 tire on the rear wheel of Xiaomi 1s. Is that true, I have to turn the rear wheel rim 2.5mm left and right with a lathe? Then 10" x 3 tires fit? Because the original 10"x2 is 155mm and 10" x 2.50 and 10"x3 is 150mm inside diameter of tires. That's why I have to turn (remove) 2.5mm on the right and left on the lathe? Is that right my Friend? Mfg.
It is not necessary to remove the rim to 150 mm, because the rim is very weak! It is enough to take off 2 mm "per side", so to 151 mm, so that the outer tire is a little tight! I just turned mine and it turned out great!
@@messor01 An answer after 2 years?? I only started 2 years ago! You can see what my Xiaomi 1S looks like now! I did an EXTREME conversion in 5 months! I now have 10"x4.50 tires (11cm wide) on it 😉
@@messor01 I meant that I asked this question here 2 years ago! And you are commenting today. So you are commenting 2 years too late! You can see that 🙂
@@don.s_a_l_v_a_t_o_r_e Since he didn't answer anyone, that's why I gave an answer, because it's not just for you! But also for others who want to transform their scooter!!!
It is not necessary to remove the rim to 150 mm, because the rim is very weak! It is enough to take off 2 mm "per side", so to 151 mm, so that the outer tire is a little tight! I just turned mine and it turned out great!
Se puede bajar la llanta un poco asta el alambre de acero que lleva afentro . Pero tenias wue bajar el Aro eso biene de Fabrica, esa llanta que pusiste y mas la rebaja , rsta bailando Mala Obra
I don’t think this guys want other to have what he has he is all about showing off what he has that why he didn’t share any link or answer all your requests. Thumb down.
good day sir. anung sukat po ang tatanggalin sa rim sir . anung sukat po sasabihin ko sa machine shop na ibawas po nila ? sila napo ba mag tatanggal ng motor sa harap ? or ako napo? para rim / motor nalang ang dadalhin sa machine shop
@@RHON_TV yown. maraming salamat sir rhon, always watching your video .. last na sir. panu po kaya pag nahinto2x yung throttle kahit di naman ako naka break. tapos biglang dina gumana throttle nya. tapos off ko then on. nagging ok na. ? baka kasi delikado eh. 1 bar na sya nun pero hindi pa blinking sir. salamat sa sagot sir. lagi kami nanunuod ng group namin sa pinas sa mga tutorial mo. saka etong kay sir alfred
that is insane dude i mean i installed suspension front and back on my xiaomi and modified the software to limit the speed to 16 - 19 - 22 kmh and installed a 2nd battery and underlight sistem on my pro2 but this is on another level of moding a xiaomi you guys are legends that dont even look like a xiaomi anymore
you guys took M365 and build Optimus Prime from it. Great work!
That extended bottom plate is too close to the ground for my liking.
Fr
you took this to a hole nother level.i like the way youre working. greetings from Switzerland
Ja
Problem is it looks ugly with this Frankenstein fork in front.
Where can y ou get that front suspension kit?
Très beau travail par contre attention aux yeux avec la soudure a l'arc sans lunettes!!!!
is there benefits to making the motor RWD over FWD? id like to know
Très belle vidéo merci à vous vous avez mis quoi en pneu et jantes merci
Firmwares are such crappy with apps are worst part and so glad got my plans without using any firmwares apps and also have found select to run 24/7 without getting battery flat 😉🙏👌👍
Can I put bigger honeycomb tyres on 8.5 inch rims
Under the board, what is the capacity of the battery?
what total capacity?
and what is the range then? ;)
3" tires are noticeable as compared to 2" tires?
Hey bro,
How much of the rim had to be turned to fit the tire? Because I want to do it for myself too! (10:00)
Ayos!! Peedong lang malakas.. Enjoy sa setup paps....
That's the sexiest xaiomi I've seen yet in the world
Ang ganda ng set up mo sir saang machine shop po kyo nag patabas o triming thanks
Hi again!
Hi! One more question: I would like to mount a 10" x 3 tire on the rear wheel of Xiaomi 1s. Is that true, I have to turn the rear wheel rim 2.5mm left and right with a lathe? Then 10" x 3 tires fit? Because the original 10"x2 is 155mm and 10" x 2.50 and 10"x3 is 150mm inside diameter of tires. That's why I have to turn (remove) 2.5mm on the right and left on the lathe? Is that right my Friend? Mfg.
It is not necessary to remove the rim to 150 mm, because the rim is very weak! It is enough to take off 2 mm "per side", so to 151 mm, so that the outer tire is a little tight! I just turned mine and it turned out great!
@@messor01 An answer after 2 years?? I only started 2 years ago! You can see what my Xiaomi 1S looks like now! I did an EXTREME conversion in 5 months! I now have 10"x4.50 tires (11cm wide) on it 😉
@@don.s_a_l_v_a_t_o_r_e After what two years? I just did this not two years ago!
@@messor01 I meant that I asked this question here 2 years ago! And you are commenting today. So you are commenting 2 years too late! You can see that 🙂
@@don.s_a_l_v_a_t_o_r_e Since he didn't answer anyone, that's why I gave an answer, because it's not just for you! But also for others who want to transform their scooter!!!
hello my friend bought you or the red and black cover of the front wheel thank you
What is that engine noise? friction ? 4:00
How much did you take off the rims to make the tires fit?
It is not necessary to remove the rim to 150 mm, because the rim is very weak! It is enough to take off 2 mm "per side", so to 151 mm, so that the outer tire is a little tight! I just turned mine and it turned out great!
Boss may shop kayo para sa customize and upgrade the watts ng motor para sa scooter ng 250w 36v
Se puede bajar la llanta un poco asta el alambre de acero que lleva afentro .
Pero tenias wue bajar el Aro eso biene de Fabrica, esa llanta que pusiste y mas la rebaja , rsta bailando
Mala Obra
where u bought your staffs for upgrade? let us a link for exemple. Thanks
Please where do I get the extended battery cover?
Malupitang set-up, if I have more money or higher salary sana😀😀😀
Inshalla mkaka hanap ka din paps
Foldable handle na Lang sobra lupit na nyan😁😁😁
czcams.com/video/qsABfX7-63o/video.html
Boss ano sukat nun tabas
Boss
I don’t think this guys want other to have what he has he is all about showing off what he has that why he didn’t share any link or answer all your requests. Thumb down.
Hey Dude …How many mm was removed? 2.5 mm? The original tire has 160 mm diameter or 155 mm? The width of the tire has 150 mm?
9.5mm
good day sir. anung sukat po ang tatanggalin sa rim sir . anung sukat po sasabihin ko sa machine shop na ibawas po nila ? sila napo ba mag tatanggal ng motor sa harap ? or ako napo? para rim / motor
nalang ang dadalhin sa machine shop
Hi sir
Sir kasha ba ang 10x2.5 na gulong sa xiami? Hnd na ba kailangan mag bawas pa sa hub?
cool super
sir ilang centimeter binawas mo dun rim motor para mag kasya ung 10x3
idol. nalaman mo kung ilan sukat ng binawas? pa share naman idol. hehehe
@@DailyClipsChannel05 yes sir 2- 3mm sir binawas para mag kasya malaking gulong
@@RHON_TV yown. maraming salamat sir rhon, always watching your video .. last na sir. panu po kaya pag nahinto2x yung throttle kahit di naman ako naka break. tapos biglang dina gumana throttle nya. tapos off ko then on. nagging ok na. ? baka kasi delikado eh. 1 bar na sya nun pero hindi pa blinking sir. salamat sa sagot sir. lagi kami nanunuod ng group namin sa pinas sa mga tutorial mo. saka etong kay sir alfred
hindi naman mababasag yung rim sir pag ninipisan anu
Bonjour c est quoi comme taille de pneus et la jante est elle en vente sur un site?
10x3
@@princyandrianiaina4044 merci mais sinon le pneu est mis sur la jante d origine?
@@hugoalvarez430 oui
Boss saan po may machine shop dito sa dubai
idol plan ko po mag kabet ng 48v sa xiaomi, extra bat po yung 48v posible po ba at paano po salamat
boss kailangan bha talaga bawasan unng rim. may 10x2.5 na tire ako sa xiome ko kaso di tlaga fit eh. ano advise mo boss
Uu sir bawasan kung 10inch d na need
Cuantos mm has tenido que rebajar la llanta para que encajen?
Es la unica manera por lo que eh visto
Hi Sir. Ilang mm po ibabawas sa gulong? Salamat
ano max size ng tire sa front sir pag nakamonorim na
ท้องรถติดพื้น
boss, pwede pa guide ? saan area yan na pwede pagawan nyan?
Ces nul avec ces pneus là avoir comment elle tremble et tu en pense quoi l'ami. Sinon à par sa elle et belle comme sa
Boss kaya ba 2 tao jan sa m365?
sir pang anong rim ng scooter yang isa?
Boss pwde bang ma customize yung motor nang m365 kaya bang paabutin gang 50
Mga boss ang ganda ng pag ka customised mag kno po aabutin mga sir gusto ko rin sana po
Nsa 500 pesos po
@@digsmoto3446 sa pinas ba boss? puntahan agad kita
Where did you get the thing on the front wheels
Amazon
@@digsmoto3446 what's the name
Tire 10x3
@@digsmoto3446 thanks
Boss bka pde mlman.ilan mbbwas pag pinatorno.slamat
Queda a un cm del suelo
Sir may tanong lng ako
What location
Paps,San kau nka base?
Welding with no eye protection?!!?
It's dumb
Tga San c boss na gumgawa?
Mdr tes suspensions ne servent à rien vu l'espace qu'il y a entre la rehausse de deck et le sol, ta vraiment pas beaucoup...
Hindi ba xa yumuyugyog kahit konti?
Hndi sir kac na torno sya sa machine shop
Where can i buy the tire 10×3 please tell me.
location sir?
Dubai sir satwa
Magkano po ang mod sainyo?
Boss magkano pa customize nyan papalagyan ko din sana Ng off road tire harap likod 10x2 ung Xiaomi m365 pro ko.
lowerd insan ah ah hahahhaa
Idol ilang cm ang binawas?