EZ Flares Universal Fender Flares OFFICIAL Installation Instructions
Vložit
- čas přidán 25. 08. 2024
- PREPARATION: Careful preparation is important for maximizing the life and durability of your EZ Flares. Clean application area using isopropyl alcohol (test a small unobtrusive area for color-fastness). Application area must be completely dry before installing your EZ Flares.
FOR MAXIMUM LIFE: For long lasting strength and durability, apply when temperature is at least 72º F (21º C). In colder climates, apply heat to the tape using a hair dryer or heat gun to help strengthen the bond.
STEP 1 (PEEL): Peel protective film from tape starting at one end of the EZ Flares and attach to the surface of the vehicle.
STEP 2 (PRESS): Continue installing to the rest of your vehicle while making sure to firmly press and hold the EZ Flares for several seconds against the surface of your vehicle. Make sure to eliminate air bubbles and gaps.
STEP 3 (CUT): Cut excess off with sharp scissors.
CLEANING: Clean the EZ Flares the same way you would clean your car. Using soap and water will help eliminate dust and grime build-up. Do not wash vehicle for 24 hours after installing to give the tape time to cure.
SHINING: You can easily give your EZ Flares a nice glossy shine or help eliminate scuffs by applying tire-shine or Armor All to the surface.
Can't wait to get mine!
We look forward to seeing the results!
just ordered a set for rears only, Challenger, 11.6 wide tires will stick out.
They will work great on your Challenger. Check out our gallery to see some installed: ezflares.com/gallery/
Keep sticking with winter's conditions?
Yes! As long as they are installed well, our 3M adhesive has no issues in sub-zero temperatures.
I don’t see on your website that you have a 6’ one
The EZ Flares come in 10.5 feet. Do you need 6 inches or 6 feet? Reach out to us directly at support@ezflares.com so we can help you out!
Do i need to purchase one for each tire ?
You would generally need two units to do all four tires. One unit is enough for two fenders (one axle).
We’re do they sell that
On our website at www.EZFlares.com or Amazon.com!
Que medida son de ancho
Nuestro tamaño normal es de 2.5 cm y nuestro modelo XL mide 5 cm de ancho.
6inchs
Sorry. Our biggest size extends 2 inches.
Should add some screws , you never know what terrain you’ll be on or what track you’re gonna take and it could just be ripped off like bandaid.
We use top of the line 3M automotive adhesive so as long as it's installed well there is no need for screws!
I own a 2019 Jeep Wrangler JL; what model do you advise for me to order (4 pieces)? Thank you.
Both our 1" and 2" sizes will work with your Wrangler! It just depends what look you want to go with. One unit/roll is enough for two fenders, so you will need two EZ Flares units/rolls to be able to do all four fenders. Feel free to check out our Customer Gallery to help you decide: ezflares.com/gallery/
Do you still need help deciding which size to go with for your Jeep?
@@EZFlares Considering that I'm from Portugal, how can I place the order? Do you have any distributor(s) in Europe? Thank you for your attention.
@@antmrod5198 Yes, you can order from Amazon (Amazon.de, Amazon.es, Amazon.it). We can also ship directly to you from the USA. We offer low cost international shipping from our official website: ezflares.com/store/
Price in India?
We don't have distributors in India, but you can order right from our website with low-cost shipping from USA! Check out www.EZFlares.com!
Cod possible??
@@visekeyho4186 Sorry, we only accept payment prior to shipping.
do you have shipment in Philippines..how much ..?
Home Depot just 3m in autozone lol
The EZ Flares come to your door ready to be installed right out of the box - No need to waste time buying materials and assembling your own!
Flimsy Flares
EZ Flares are a great solution if you don't want to spend time installing and just want to pass an inspection or stay legal.
These look so goofy lol