Is It Track Worthy?! Epic Traxxas Sledge Build 3
Vložit
- čas přidán 8. 08. 2023
- The Traxxas Sledge was designed to be a solid basher monster truck. But over our build series, we’ve shown you can have fun with this truck beyond what it was built for with a little creativity. In this final build of the series Greg has turned the Sledge into a track truggy. Taking cues from current race machines, the truck has been tweaked and modified to lay down some fast laps. Could this be the best build with the Sledge so far? Watch to find out!
Basher Sledge Video: • EPIC Traxxas Sledge Pr...
Street Sledge Video: • Slammed RC Street Truc...
Test Location: rcmadness.com/
PRODUCTS USED
Traxxas Sledge Chassis-
Drag Link-
Front Tie Bars- bit.ly/3DPg0hS
Rear Tie Bars- bit.ly/3DPHovU
Front Camber Links- bit.ly/3KxvavG
Servo Saver Post- bit.ly/45ctQXi
Caster Blocks- bit.ly/44XzEEj
Steering Blocks- bit.ly/451t0wv
Carriers- bit.ly/3s583T3
Machined Ring/Pinion- bit.ly/47mv5F3
Shock Caps- bit.ly/47rKALO
Swaybar Set- bit.ly/3OMUW1v
JConcepts F2 Body- bit.ly/3QwwzXb
Paint: Kustom RC Graphics
JConcepts F2I 1/8 Off Road Wing- bit.ly/3QyVd9J
Exotek 22mm 1/8 XL Aluminum Wing Buttons- bit.ly/3YAyImL
Tekin Gen3 ESC/ Motor Combo- bit.ly/3OOXEnq
SLEDGE SETUP
Diffs: 20k/15k/7k
Front Shocks: 40 wt. stock springs
Rear Shocks: 35 wt. stock springs
- Going to light springs in the back helps add a little rear bite on acceleration.
Gearing: 16/52
Sway bars: Front (yellow), Rear (green)
BUY RC
SHOP AT A-MAIN:
RC DRIVER SHIRTS & MERCH: teespring.com/stores/rc-drive...
RC GEAR WE USE: www.amazon.com/shop/rcdriver_...
HANGAR RC Crawler Obstacle Kits- bit.ly/3USjho2
INSTA360 Action Camera- bit.ly/3PfuZbK
DEAL CENTER
Specials at Amain Hobbies-
10% Off At Sterling Kit Engines, Use Code: SK10 bit.ly/43EHxO4
Great Beginner RC’s Under $200
Traxxas Slash- bit.ly/3oYFfKR
Traxxas Stampede- bit.ly/3Je1wLe
MY FAVORITE TOOLS
MIP Power Tool Hex Bits-
Makita Li-Ion Hex Driver- amzn.to/3NdxWqJ
Duratrax Soldering Iron- bit.ly/4643vvE
Lexan Scissors- bit.ly/3PgZcXY
Side Cutters- bit.ly/3CBbmDa
Pliers- bit.ly/464xIKZ
Shock Pliers-
MIP Thorp Hex Drivers- bit.ly/4412lPB
MIP Nut Driver Set- bit.ly/3CudgWk
Pit Mat- bit.ly/3JhUR2V
Tire Glue- bit.ly/446sblv
Dremel Tool- amzn.to/3N8mnAR
Traxxas Driver Set (for on the go) - bit.ly/3p9Azlh
MOST USED ELECTRONIC GEAR
Hitec RDX2 Pro Charger- bit.ly/465JuEO
Traxxas ID Charger- bit.ly/42JpOUk
Spektrum Battery Checker- bit.ly/42GOuwP
SkyRC Speed Meter- bit.ly/3p6AWNr
HELPFUL PLAYLISTS
Get Into RC- • Get Into RC
Fix My RC- • Fix My RC
How To’s- • How To's
Tools & Accessories- • Tools and Accessories
Don’t Miss A Thing! Follow Us:
Subscribe To Our Main Channel: bit.ly/SubToRCD
Instagram: / rcdriver_online
TikTok: vm.tiktok.com/ZM8FHDs8G/
Website: www.rcdriver.com/
RC Nation: bit.ly/RCDrcn
*Notice: Some of our articles, videos and descriptions may contain affiliate links or coupon codes, which means that if you click on or use one of the product links/ codes, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Products shown may have been submitted by the manufacturer for review which is why the Paid Promotion label may be on the video. The manufacturer has accepted our terms of providing an unbiased review to our audience. If there is an actual monetary exchange for the content, we will verbally announce that the video is sponsored.
#RCDriver #Traxxas #RCTruck #radiocontrol #rchobby
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
My goodness - what a terrific job brother...this one is a gem looks absolutely stellar!!!!
Thanks so much! Really enjoyed this build!
Yes looks great 👍
My God !!!! That was Hands down one of the best Sledge builds I've ever seen.
Thanks! I love the way it came out. Might add the new carbon towers to it... just because! lol
The truck looked great. It seemed easy to jump and it hooked up well.
Love hitting that track with my sledge as well. Nice build my friend hope to see you at RC Madness one of these times
The paint on the bodys soo awesome ❤❤❤
What a great build, that thing handled the track like a champ. I'm only glad I don't have a Sledge or I'd be ordering parts right now, haha. Thanks again for the amazing content Greg!
Wow built looks fantastic 💯
Nice driving, great build!
Thanks! I’m a bit rusty on the track with an 1/8. But got it around good enough to show it off. It was a blast!
Wow!! Sweet build! Looks and runs really well. I can't say I understand why you built it but, it's pretty sweet. I guess if one REALLY wants to race a TRX, here it is. Love to hear how it fairs in competition. I am jealous of that track for sure, we literally have nothing like that in upstate NY that I'm aware of. Goid lock with it!!👍😁🍻
This is the best-looking Sledge, of all the builds!!
Thank you for this series , this was fun to watch , my fav lineup is how they came out , #1-Summit #2 Street Sledge #3 Race Sledge
Awesome project
I want to see a race with this Beast!
This is definitely my favorite of the 3!
EPIC BUILD!!!
Wow! Way better than out of the box. Now u can keep up with the pros boyo🤙
Good stuff Greg. Like button energized.
The race version followed by the street basher… great thoughtful content bra…! 😊
Awesome builds they all look amazing I would have to drive them to pick my favorite great job on all of them👍👍
Thanks, it was a big challenge to get them done, but in the end, they came out great and were fun to drive.
The street Sledge is definitely my favorite
Nice build , looks like a track beast
Awesome build 👍🏽🤙🏽
Thanks! It was fun build.
I think they are all awesome builds
I’m between the street truck and race truggy. Good stuff!
Nice build
great video , thanks
Thank you! It all worked out great!
Now we need Traxxass themselves to actually come up with a buggy 1/8, and Truggy for real
Yea people have been saying that for 30 years now. I was hoping the sledge would finally be a race worthy platform with droop screws, but once again they ignored the "scale" of regulation 1/8 truggy class. And it is over priced as per usual.
Awesome job the Summit body was my favourite
Thanks! I liked that one because it fooled so many people. I actually argued with someone that was convinced it was a complete Summit.
That looks dope
Thanks!!
Sledge build 🙌🙌
Woah on that stretch it jyst keeps pulling🎉🎉🎉
Truck looks good cranking out laps.
Nice!
traxxas needs to shorten the Sledge to an 1/8 scale buggy already! and offer both the Sledge and TRX8 in nitro!!!!!
I’d love to see a nitro sledge truggy and buggy, maybe traxxas can even roll out a new true big block engine
I think you get on the new slash chassis
@@paulclancy2404 new slash chassis is longer than 1/8 buggy, and also not aluminum/flat style. The new Slash Raptor thing is an oddball size. Some have already made 1/8 buggies out of regular slash 4x4’s which is great, but it’s also not a 1/8 platform
I would love to see how well your sledge dose In a race. I am using the sledge hs my truggy now and want to see other that are better driver lay down some labs
“Traxxas Sledge Platinum Edition”
Now THAT would be SICK!
Sikkk brotha
Keep the tires, add 1' inch extentions for stability, and maybe some type of wheelie bar.
Also thickening up all the diffs will help when one tire just lifts off the pavement all the power won't fly to that tire making it go crazy flippy😮
Looks like a blast, some tweeks and it will be a beast, maybe not a big Sender but more controllable and some sends as well
Looks pretty worthy...give it some competition and find out..😮
Awesome build! I actually raced my mostly stock Sledge on 4S with a 17 tooth pinion against some much more expensive 8 scale buggies, I lost but had a bunch of fun!!! Can you link me the wheel and tire setup, that was the only thing I saw missing from the video?
great build, what a unit! I recently got a used Typhon 6s and it came with the Badland MXT tires. Do you think that is a good tire for a track or do the G-Maxx TIRES for Arrma Losi HPI Ofna 1/8 Buggy Black would be better?
What did you do to the rear shock lower mount bolt with the pin style
That's a cool project, but Traxxas upgrades seem grossly overpriced for the materials used. All them red labeled boxes made my wallet flinch. Love the final look, driver seems to peer through the gap in the front shock tower.
NIIIIICE 👌🏻
Is that the stock wing mount? Also I thought 1/8 truggy wheels didn't fit on the sledge or had to be a certain offset?
What wheels & tires are they? Awesome vid!!
This was a great build series! Three very different trucks for sure. I think the track version is my favorite, and now I want to buy a Sledge and convert it from stock to track over time!
Thanks! I love doing builds. I really need to get back into the swing of being creative.
HOW MUCH WAS THE PARTS SEEMS LIKE YOU MAY AS WELL BUILT A KIT
Could build and power a mugen or xray for the price of truck and upgrades...
Indeed. Gotta be loyal to make sense of this build. Or loaded$$$🤷♂️😜
@@RMH386my Mugen Truggy from 2018 is amazing! The Mugen and my Serpent 811 cobra are my favorite 8 scale Truggy.
that Sledge has a nice size
W.O.W 🎉🎉🎉❤❤❤
Nice video! Im using 16 pinon aswell on 2k motor i think its a bit to slow on 2S what do you think should be a better option?
2S? You should be running at least 4S. The two 2S packs in my truck are in series to run as 4S.
@@rcdriver 2*2s I should have wrote 2 shorty's so 4s same as you. But agree with you it feels a bit slow so wounder how big pinion is safe to try like 18?
Hi, looks great. What do you use as a jumper between the 2 batteries?
I clamped two bullet connectors together (centered) and soldered them. It’s holding up so far.
@@rcdriver thank you!
Is it Is it possible to do the same thing to the Traxxas Rustler 4x4 vxl ??? Can we convert it to always tgg??????😊
Is that the stock wing mount?
You really did this right, just curious how much did the truck weigh with no batteries
That paint job looks sick. Does the guy you sent it to have a link or website or something?
Ah, found him @kustomrcgraphics
Did you here anything about traxxas killing off the erevo 2.0 off topi like the low slung sledge first build
All three builds turned out great...picking just one to be "the best" isn't possible. But, I will say this, the 'Summit' was my least favorite...not by a huge amount, but enough to say, if I could only afford to do 2 of the 3, the 'Summit' is the one I'd pick to not do. Between the 'street' & 'track' options, honestly, I am COMPLETELY unable to pick one over the other. 🤙🏼
It's a tough call. The Summit is probably 3rd on my list. If the body was a bit longer, I think it would have really rocked. Did the best I could, while making something different.
Where did you get the Wing and Mount for the wing?
The wing mount is stock. I used a JConcpets Wing and Exotek Buttons. I added them to the list in the video description. I had to enlarge the wing button holes a little for the Traxxas flat head hex screws to go through.
So you basically kept the chassis, shocks, and differentials. Literally everything else was swapped out / changed. I imagine the cost of this build would be more than 2x the price of the stock RTR slash.
Also kept the arms, gear cases, hardware, bearings, lots of other little bits. But it was a big overhaul. But that's all part of the hobby, building what you want. If you just like running a stock slash, by all means do that. They're fun!
I believe it would've been more unique (and hella cheaper) to have stuck with the blue anodized parts, yellow body with matching blue accents. Bright yellow would stand out nicely in a pack too.🤷♂️
Nice driving.. 👍🏻 Better than tekno.. 😂
That was the first pack when I was driving it for the camera, I only got a few laps in for a TV crew prior to me taking my video. I also haven't driven a race truggy in years on a track. I think with a bit more track and tweak time the build would look even more impressive.
@@rcdriver 95% is always man behind the wheel.. 🤣
jc doesnt have 1/8 P2 bodies do they?
They should... should do a straight kit that has all the upgrades, and leave everything else to the buyer. Or they would make it an rtr kit.
I would have kept the deception of it being a sledge by keeping the Sledge body
Race truck is best
Looks great…only one comment. Be judicious with aluminum parts. Aluminum = weight = slow.
Sending this to Braden d, he races a sledge in Etruggy class.
Awesome!
People need to support Traxxas look how much Parts they have in Stock this is awsome👍👍👍👍
The track Sledge
Tuff
The race truggy is the best by far. I wish you would of posted how much all those overpriced traxxas parts cost to turn this into a race truggy on top of the 7-800 dollar's for the truck itself plus the 700ish you have in tekin electronics. You should make a comparison video of what it costs to turn a turd into a race truck and what it costs to build a tlr or associated race kit. I would like to see numbers
I don't get what is different between a buggy and truggy?
Sometimes it's just the towers shocks hubs and wheels , only a smidge wider if we're talking race kits truck and a buggy together truggy
If you would have dropped this last week traxxas had a deal. Free light kit and Bluetooth with truck purchase. Curious what the used truck price was. I wanna get one.
I know 😩 the truck has been ready for a long time. Getting to the track was an issue and there were times I tried and the track was torn down for a redesign. In the end it was worth the wait. So much fun to drive!
Next video...wellll I put the center brace back in 😆😆😆😆😆
bro more motor? you need better shocks, that thing was slapping the floor
Want to sell the on road sledge lol
I put metal chassis braces front and rear and a whole lot of other metal upgrades that make my sledge heavier, my thinking is my car is heavy so if people don’t want their teknos or team associated to get ran over by a 40+ mph sledgehammer they’ll get out my way lol
Close to $600 in Traxxas parts + and a donor rig? Ouch
I understand you are sponsored by Traxxas and you are promoting their products but I completely disagree with using their chassis and other aluminum parts they are way overpriced and they are weak especially after you removed the center brace, one good nose dive and that chassis will be tweaked I would have gone with m2c on the chassis and towers especially if you aren’t running a center brace. But overall the truck looks sweet
Tekno Bone driveshaft are just better and cheaper
Humm...losi/horizon should sue traxxas for those shock mounts
Such a dumb and childish comment. 🤦♂️ Thanks for being a part of the problem and ruining all the hard work Input into this video for the existing Traxxas community in the process.
Lol, what was childish was traxxas sueing arrma for the Nero. Or traxxas sueing anyone for RC fun. It's also childish for traxxas to need it's own race class just to be "competitive"
Traxxas open your eyes and see this
@@PigglyWigglyDeluxe Its the fastest name in RC. They dont race but they sponsor alot of different racing so its in their blood
@@mikescherrer4923 You think he bought them? None of those upgrades except shock towers were needed. Im just saying the platform is there
@@mikescherrer4923 I'm telling Traxxas they can do same thing and market towards racing at $1000 or so. $600 to a $700 rig is pennies when compared to price of true built race kit.
With all those upgrades you could have just bought a losi 8xte 😂🤦♂️
Um this is a hobby. Where people get to build whatever they like for their own enjoyment. Welcome! 😄
@@rcdriver no shit 😂
Just build a Tekno save time and money
The packaging for the Traxxas upgrades is disgustingly wasteful. All that foam just going in the trash.
So you took a stupidly priced truck and threw some stupidly priced parts at it to produce something seemingly not as good as a ready made race truck... for a tonne of extra cost?
Hi Sri can you do it with the Arrma Vorteks 3s turn it into a race tuggy???
Thank you my friend!
@@rcdriver I'm one of you fans.. we really like to see a video that Arrma Vorteks 3s tune into a Race tuggy.... Can you do it or is it impossible to convert it to a race Tuggy !!!
Already kind of is a truggy derived from the granite , you have to use brcc chassis or just convert the buggy , really wouldn't make sence , this is already a truggy and vortex is mine version of one already
He bought the Shit that Traxxas should have done right
Build from nothing don't buy then spend 1500 bucks on
Parts are where companies make their money. There’s lots of parts needed from the stock truck to make it happen. Starting with a used truck like I did was a good route for the build.