How to Make A Mobile Multi Frequency Jammer
Vložit
- čas přidán 3. 07. 2024
- Hey Everyone,
Join me as I Make a DIY Mobile Jamming device
Please like this video if you liked it and if not give suggestions below so that I can make it better for all :)
Software: github.com/veonik/arduino-cc1101
Pins
// Uno pins:
// CSN (SS) = 10
// MOSI = 11
// MISO = 12
// SCK = 13
// GD0 = 19 (A5)
Twitter: Brains933
Email: makervlog04@gmail.com
Patreon: www.patreon.com/MakerVlog
Discord: / discord - Věda a technologie
Sweet. The breadboard is shaped like bread.
When you define a frequency, are you defining only that particular frequency (433) or a band that is centered on that frequency (say 400-460ish)? If it does define a band, how do you tune within the band? If it does not define a band, is there a module that you would recommend with that kind of tuning capability?
Great video. My only suggestion would be to add a wiring schematic and maybe a list of parts?
Ed Sheeran went back in time and chose a different career path apparently?
Ha that's a new one
😂
Nahh that’s Simon Pegg
No imagination at all dude...
Awesome thanks 🎉
Very good. I’m a little late to the party, but thanks for sharing!
Are you using a 3v Arduino ? Everything I’m reading about the cc1101 says it won’t take 5v from input/output pins. Also what sort of range have you tested this to ?
Thank you!
Excellent 👍
Can this do frequency ranges instead of one solid mhz
Great video! Can you please provide links to the parts used? I want to understand the construction.
Its crazy how easy things like this are to make!!!! Between this and how any lock can be picked in seconds of horrifying
you mean the flipper zero?
@@Sidk444 I'm pretty sure he means "bump key"
Fantastic video, How far would this reach? a house? cluster of houses ect...?
Pretty awesome and impressive. Question? On the receiver, is it possible to use a xbee instead?
Hi grant just doing this on my laptop now is there a way to send the (hello word) faster ? I set the send delay to 0 but that’s not affected the send speed ? Any ideas pal
Sorry Mr, which application used to check frequency during your demonstration
What is the range of this jammer
2cm
Not far off
does it work with 1800 mhz?
What is the software you use for frequency analysis?
I've no clue what's going on, but it's fascinating 🤣
Can u plz provide the circuit diagram and component details? Im trying to make it in my Engineering project
Have you tested this on a phone ? I would think that it shut block 800 - 1900 MHz to block gsm?
How much does it cost? What functions does it have? Interesting for educational purposes. :) Where did you purchase it? Thank you.
Could you make this with an uno without the power board?
How cc1101 jam the frequency please show that
Great video! I have been wondering how someone could make an LRAD (Long Range Accoustic Device). Could creating "sound lazers" be easily done? It would be neat to be able to transmit a lightly spoken word or even a whisper to an individual across a large field; no one else would be able to hear it.
I am not sure, maybe though I'm not sure how you would channel it
You can with ultrasonic transducer arrays;)
@@markmikhail4279 has anyone uploaded any schematics or instructions for it anywhere? If so, that would be great to check out!
@@brian95240 bitluni made a video about sonar arrays that might be a good place to start for you
@@nickusenko1348 Thanks a ton! I'm going to look now.
What is that par distribution modul ?
Make another video about RF modules for arduino
Also if other modules could perform the same function 😍😍
Hello brains I have an rc car how can I find its frequency according to the manufacturer it is 2.4ghz but I am not sure what it’s band
How can I create a unit to block a 2 mile or more radius.
hello man , please can you provide the pins connection between arduino nano and the CC1101 ?
Can something be made that would keep samcera GPS and dual dash camera from working
hi sir can i use nrf24 instead of cc1101I am so sorry that CC1101 is not available in my city
How can I acheive diff frequencies like frequency between 800 MHz to 2300MHz plzz help
Would this accidentally interfere on my neighbor's stereo? If so, how? Many thanks in advance!
Do you have anything on making a radar/laser jammer /blocker TY
Can I buy one ready made?
Hi. I’m a newbie and would like a ready made drone jammer to stop it prying in the house and garden . Is there any pre programmed modules to buy and or build. Thanks for any help.
You have to see how the drone communicates with the pilot. If its wifi, which is common, you can try using a esp wifi deauther (lots of tutorials on youtube, cost 2-5€).
What's the range?
Can you make RF SA using magical module Si4463 or 32
With wide band sweeping capability and Also a rf signal source using arduino, esp, pi?and gui tft display?
does this jam mobile phone signal?
how can i make a 315 mhz jammer
can it jam CDMA
hi grant could you please amend or add showing how to do this using a standard breadboard so i know where to put all my wires thanks
Yeah I am going to do a Breadboard video soon but if you look at the code from Github it has the wiring and pin numbers at the top. I have also put them in the description
Can I just buy a finished one from you ?
Greetings from Florida! I wanted to ask, so I have everything set up correctly and working (as well as an SDR to monitor transmissions) how exactly do you change the frequency? I've been searching for hours on how to and it only seems like I can do it off of some TI software through the registry. I've tried just simply changing the code radio.setCarrierFreq(CFREQ_868) to whatever I want but it doesn't seem to verify correctly because it doesn't recognize the new frequency, any ideas on what I'm doing wrong?
I dont have the code in front of me but I would double check the documentation to make sure you are using the correct commands. I will have a look when I get a chance :)
@@Brains933 Alrighty I'll check again, thanks for the reply! Keep up the great work!
@@Brains933 So I actually just figured it out, the way I managed to do it was by first downloading the SmartRF software by TI, finding the CC1101 on the screen, clicking it and choosing "open RF device in offline mode" and then from there it should show you a screen and to the right (you'll need to enable RF Parameters and Register View in the View setting at the top) you'll be able to choose FREQ0, FREQ1, and FREQ2. You'll need the value hex code later. You then simply change the base frequency on the screen to whatever you want, go into the CC1101.h file in the library and then choose one of the frequencies you don't mind getting rid of and simply changing their values in the file. (Just leave it the same name or you may have problems whenever you choose it using the CFREQ_ command). After that simply edit it in the main arduino coding to the frequency in which you edited. Now I may have done this entirely wrong since I'm not the best at understanding script but I did manage to get it done if anyone else has this issue. It would be great if someone could make a library with a bunch of channels together for easy changing. Anyways, cheers!
keelan where in florida are you?
transmit a square wave to properly blast them!
Can it stop russian tank comms and gps
Hello mate! Another great video! (hats off) Thank you so much! My supervisor gave me this project but I couldn't find any useful tuitorials on the web! But can you please make another video and elaborate this one? I really hoped you would be doing this project on a bread board, because that would have been really helpful for students like me. If you have the time to spare please make another video.( I would be really greatful! As my final year project depends on it!) And if not can you atleast tell the connections between the pins?
Thanks for your support and help!
#include
#include
#include
#if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
#define CC1101Interrupt 4 // Pin 19
#define CC1101_GDO0 19
#elif defined(__MK64FX512__)
// Teensy 3.5
#define CC1101Interrupt 9 // Pin 9
#define CC1101_GDO0 9
#else
#define CC1101Interrupt 0 // Pin 2
#define CC1101_GDO0 2
#endif
CC1101 radio;
byte syncWord[2] = {199, 10};
bool packetWaiting;
unsigned long lastSend = 0;
unsigned int sendDelay = 0;
void setup() {
radio.init();
radio.setSyncWord(syncWord);
radio.setCarrierFreq(CFREQ_433);
radio.disableAddressCheck();
radio.setTxPowerAmp(PA_LongDistance);
}
void loop() {
const char *message = "Hello world!";
CCPACKET packet;
// We also need to include the 0 byte at the end of the string
packet.length = strlen(message) + 1;
strncpy((char *) packet.data, message, packet.length);
radio.sendData(packet);
}
Code that he is using dont forget to download the packages from the github!
And this one is the schematic for the C1101
www.aeq-web.com/arduino-10mw-cc1101-ism-rf-transceiver/?lang=en
hi did youmanage to get the builkd instructions for a breadboard?
@@nicolagillis500 i am searching for that too if i will find it i will paste it here.
I have put how to wire up the pins in the description hopefully this helps in the mean time
@@Brains933 plz plz plz sir i am from india i cant understand ur discription pins plz give it in a animated format
Does anyone of you guys tried to implement the same approach by using NRF24L01? I am looking for Arduino code changes required.
I am new.... what software is that? Free?
Does it jam the Downlike for GSM
Which is the 960 Mhz ?
Cuz i saw the data sheet for cc1101 it says the max frequency is 915Mhz which is the uplink for GSM
Please I Need help as soon as possible for graduation project
No it wont be able to hit the down link for GSM
@@Brains933 thanks for replying
If i build such a project is it gonna jam 2G mobile phones? I have no time to try it so i need help
It could. Although if you are just wanting to interrupt 2G GSM phones and have access to good SDRs you can set up a fake base station and DOS the phones that way
Plz give the circuit diagram
Program bro
Hello from Brazil, I have a question, does it work for bluetooth? What is the simplest way to do it for bluetooth?
Wi-Fi and Bluetooth both operate on the 2.54ghz spectrum, although some Wi-Fi also works on the 5ghz spectrum. So if you jam the 2.4ghz Wi-Fi you'll also jam Bluetooth.
make implant transmitter jammer
Sir plz plz give the circuit diagram clearly plz plz plz plz sir
UNTUK RADIO FM BISA KAH YA GAN ?
Hi! It's a nice idea, just I'm looking for bluetooth jammer, as I see this device is not in range bluetooth, or I'm wrong? Probaply you coud advice some solution - my neighbor use bluetooth loudspecker at night..
Vitalii M bluetooth is wifi so you can find the frequency and set it in the program. Set an interval so it jams on and off so they think thier shit broken 😂
Sir i need parts names
mind as well use it for something lol
Can we use nrf24l01 module instead of cc1101 module bro....😁
Hi there. Re drones and security. Boundary security is important at my farm .Can you kindly help with a raspberry pi or similar land F band radar unit please?
Diy boundary radar theses days is important .
Adding a 360 degree rotating co linear panel antenna with a linear
10w Rf output including code for size of object differential algorithm (bird, drone,man or car ) at 700m would be awesome.
Im happy to buy a radar kit on your web site ( F band ) pre programed would be fantastic.
I can also be keen buy the Gerber file for printing the 18 inch x 18 inch co linear array PCB and have your filter plus a tuned circuit design fitted to pcb aerial.
Have potchers on farm problems.
Thanks mate for your videos
From Andrew
How much to make me one and mail it to San Diego, California??
How can i jam a DAB uk radio signal to annoy my dad who loves upsetting lots of people PLEASE? I'm really desperate thanks.
Now i can bypass my neighbours alarm and rob 3M tax free usd
Kindly send schemtatics
do you have a tutorial on making a jammer for sub woofers
Unless it is wireless you cant do much to subwoofer with my kit
Someone has an asshole neighbor. The best legal solution is an 8 AM retaliation after their late night with something obnoxious. Anything on the Gitmo playlist at 11 equally loud.
Hey tech guy can you make me one of those little thing that can destroy my chips on my body,please?
I wonder if an Arduino program that scan's then jams signals it receives.. or 2 Arduinos.. one scanning and the other jamming... Oh that wouldn't work will it..
No..
But could something like that be used to jam frequency hoping signal's..
Military technology is dodgy to discuss. 😅
That is possible...might do a video on it
You should. It's crazy interesting stuff plus you you have a great set up for testing too. 👍🇮🇪
I have an idea, can You build me the same item? Programed and everything just need to power up.
No
Have you PCB Layout ?
There is circuit diagram on the discord server but no PCB Layout because I was using proto board and it was not that well planned out.
@@Brains933 oky jamming freqenzy 868.958 mhz on C1101 ?
@@Brains933 runing on Nano ?
Yes and yes, though you can change the frequency from 433Mhz, 800 and 900mhz
@@Brains933 900 ist to higt muss jamming 868.958 mhz kann offset on C1101 freuqenzy offset
What is the name of the software he use in the video guys??
CubicSDR
Why does the circuit board look like the same shape as bread and called a bread board? 😂
Breadboard is just another term for a prototyping board for a circuit and someone at a security conference made that as a badge
How much to buy something like this? If say I have a POS creep neighbor who uses drones to spy on my family could something be made to stop him?
This would be criminal, illegal in most places. As in jail time. Also, not difficult to track with simple equipment, like any other interfering gear
Correct. I believe I mentioned that in the video. I also have a video talking about why they are illegal and as you pointed out that they are easy to find.
Does anybody know what software he is using to measure the signal strength in corner? 🌻
It was a while ago. It was just some SDR software. Might have been SDR#
please tutorial use esp8266
Greetings fam,
Can you please share detailed wire/devices connections info?
Very impressive.
#include
#include
#include
#if defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1280__)
#define CC1101Interrupt 4 // Pin 19
#define CC1101_GDO0 19
#elif defined(__MK64FX512__)
// Teensy 3.5
#define CC1101Interrupt 9 // Pin 9
#define CC1101_GDO0 9
#else
#define CC1101Interrupt 0 // Pin 2
#define CC1101_GDO0 2
#endif
CC1101 radio;
byte syncWord[2] = {199, 10};
bool packetWaiting;
unsigned long lastSend = 0;
unsigned int sendDelay = 0;
void setup() {
radio.init();
radio.setSyncWord(syncWord);
radio.setCarrierFreq(CFREQ_433);
radio.disableAddressCheck();
radio.setTxPowerAmp(PA_LongDistance);
}
void loop() {
const char *message = "Hello world!";
CCPACKET packet;
// We also need to include the 0 byte at the end of the string
packet.length = strlen(message) + 1;
strncpy((char *) packet.data, message, packet.length);
radio.sendData(packet);
}
Code that he is using dont forget to download the packages from the github!
And this one is the schematic for the C1101
www.aeq-web.com/arduino-10mw-cc1101-ism-rf-transceiver/?lang=en
where can I get a cheap power distribution module? anyone?
I believe I got that one from amazon
@@Brains933 Could you link me one that you would recommend? (preferably the cheapest one possible)
Will you sell me one
... Could you make me a radio jammer !
No, these devices are illegal where I live without the proper permissions and therefore I cant supply or help people build them.
I can legally transmit 400 Watts of RF at 433 MHz. as holder of an Amateur Radio licence. It will walk all over your punt little jammer
Can you make me one I'll buy it
Hi i need your help to build laser jammer high distance for p0l1cE radar. I need to dedect the signal send to my car pamper from p0l1ce laser radar. Need to dedect the signal from 750nm-1000nm ligth but with mhz signal from 10mhz- 3000mhz. The minimum distance must to be 1000km.
Am wondering if this what am asking can be real.
I don't care if is legal or not.
I am from Cyprus everything is legal and everything is not😂
Can you do RF cloning with this?
That's usually what people use to steal cars. The program he was running showed what frequency his key fob was. This is strictly a 433mhz chip so you'd need a chip that can change frequencies if you want to clone.
Wow ! 😮😮
Fr i like arduino af
Im arduino fan lol
Uk ok seriously so can it create like 5Ghz ? Or 2.4 wifi Ghz ?
Why Every Ardurino And Other Similar Type Of Pcb`s Have 45 Degree Ic's?
Please make a WiFi jammer tutorial
Friends, I warn those who want to do this project using an amplifier. You cannot go above 928 Mhz.
Need a amplifier with range above 928 MHz right
So, why would people spend money for these and build them? Hmmm
Can you make me a jammer to jam 13.56 Mhz signal???
Why 13.56?
@@Brains933 cause I was wanting to do a project.
That's in the HF range range. I think used by RFID readers. The antenna for that is pretty big
@@Brains933 what components would I need
So are the components for the 433 the same for the 13.56
Can you build me one that jams wifi and all cellphones battery based 100 meter range
how to make a freq jammer..
27.000 mghz?
27Mhz is within the HF frequency range and way to low for this device
COULD I BUY A MULTI FREQUENCY AMMER FROM YOU MAKER VLOG I HAVE A PRIVATE EYE SCRUING WITH ME BAD
Why do you need a jammer device, for what? Why to support making illegal electronics to make people life miserable? Use your time to do something good.