Slip ring , i use one to retain a steel casing pipe with a diameter of 165mm. In this film a second one could be used to prevent the pipe from falling back in the well or drilled hole. A double chain sling works great too.
Good idea but a more universal alternative I would propose would be to use a rope to tie a pipe hitch to your pipe - it will grip onto a pipe of any diameter and it can also be readjusted as you pull up more pipe. Plus you probably already have rope lying around.
He's using a $350 pipe catch that auto locks and a $2 fitting to raise the pipe lol. This fitting works but with a lot of weight it may crush the pipe due to the way it binds. You could also make something similar with a torch and a flat piece of metal or use a simple pipe hitch knot with some rope.
After the video was made I also cut a section of the flange to allow it to go on the pipe from the side. It was still strong enough to work to pull the pipe
Pretty poor description of the pipe fitting. I have never seen a fitting like that at the plumbing supply. How do you seal the top of that well to keep it clean?
Well let the dascription trigger the imagination... it's something round with 4 bolt holes and a large treaded hole in the middle and found at the hardware store and if you don't use it for this project you can use two with a pipe between to hang your clothes on...And always if... you have a well and mess with it you use chlorine tabs or bleach when your done!!!!
This is what happens when you have no clue what the fuck your doing!!! I've been in the well industry all my life ,3 rd gen im 44 and this is just crazy
Thanks for sharing. I have had the same pump on my well for 20 years. Has to be about time.
Thank You! I made a device like that today. I don't know where you purchased it so I made one.
Slip ring , i use one to retain a steel casing pipe with a diameter of 165mm. In this film a second one could be used to prevent the pipe from falling back in the well or drilled hole. A double chain sling works great too.
Good idea but a more universal alternative I would propose would be to use a rope to tie a pipe hitch to your pipe - it will grip onto a pipe of any diameter and it can also be readjusted as you pull up more pipe. Plus you probably already have rope lying around.
Pipe hitch?
Nice work, smarter not harder.
What kinda of clamp is that?
Threaded round pump flange looks like 1 1/2 - 2
Can you explain the green device holding pipe, and a bit better explanation on how you made that metal puller? Tks
He's using a $350 pipe catch that auto locks and a $2 fitting to raise the pipe lol. This fitting works but with a lot of weight it may crush the pipe due to the way it binds. You could also make something similar with a torch and a flat piece of metal or use a simple pipe hitch knot with some rope.
It's a well pipe dog...find it on ebay for 30 dollars used
They have or had a clamp that works same principle, called a Come along. Used them many times
He’s so happy
Very Happy indeed.
After the video was made I also cut a section of the flange to allow it to go on the pipe from the side. It was still strong enough to work to pull the pipe
Keep up the great work.
@@jimmaldonado-cy8hq I don't know about great work but it defintely was work!!!!
Genius
What's the name of the green device that's holding the pipe from dropping back down?
pipe dogs
Is that a round flange and you ground 3 sides away?
Yep
What is the full name to help me find a "round flange? And find one of those green things?
Would it be strong enough to work on 1.25 inch galvanized pipes?
It should be able to grab galvanized pipe. I don't think it would grip plane steel but it might
I went to lowe's they had no idea what that piece was lol 🤦🏼♂️
It's a steel wall flange
Cool 🆒
Pretty poor description of the pipe fitting. I have never seen a fitting like that at the plumbing supply.
How do you seal the top of that well to keep it clean?
Well let the dascription trigger the imagination... it's something round with 4 bolt holes and a large treaded hole in the middle and found at the hardware store and if you don't use it for this project you can use two with a pipe between to hang your clothes on...And always if... you have a well and mess with it you use chlorine tabs or bleach when your done!!!!
@@mikeking4773 LOL, you are a mystery man!
What is that device called
Which one. Well drilling company might have the pipe foot brake
@@cathaking8205 Just found out the true name is a (water well pipe dog)
👍👏
czcams.com/channels/RMhSwRZlw3fUZVHqkCl36Q.html
This is what happens when you have no clue what the fuck your doing!!! I've been in the well industry all my life ,3 rd gen im 44 and this is just crazy
You sound like a typical well person, like no one else can do your job
LOL.. Look....someone pissed they figured out a way to fix their own well and didn't have to hire this "Joker" and pay their kids college education.
probably do the same thing with a 2x4 a wire reel and some help
Your just jealous