2 Stroke Engine Assembly: How assemble the crankcases
Vložit
- čas přidán 7. 09. 2024
- In this video, I show how to assemble vertical crankcases. Thank you for watching. Please subscribe and share my work!
Amazon Tool Links:
Crankcase splitter/installer tool:
amzn.to/30dDUB0
Crankshaft wedge tool:
amzn.to/3cBrncX
Tool Links:
www.amazon.com...
If I can ever be of service to you, here is a video explains how to connect with me.
• How to get connected w...
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Shirt/Stickers link: how2wrench.com...
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrenc...
CZcams:
/ shaneconleyhow2wrench
Instagram:
/ how2wrench
Linkedin:
/ shane-conley-how2wrench
Facebook:
/ mechanicslearningshari...
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com...
Amazon Tools:
www.amazon.com...
Click the links to playlists: (entire list link is the last one)
Harley EVO: • "How To": Evolution St...
Harley Twin Cam: • "How To": Twin Cam Har...
4-Stroke Engines: • "How To": 4-Stroke-Eng...
2-Stroke Engines: • "How To": 2 Stroke-Eng...
Small Engine: • "How To": Small Engine...
Every Mechanic Should Know This Training": • "Every Mechanic Should...
Transmission: • "How To": Transmission...
Wheels, tires, brakes: • "How To": Tires / Whee...
Electrical: • "How To": Electrical S...
Fuel, air, intake: • "How To": Fuel / Intak...
Suspension: • "How To": Suspension S...
All playlists by type:
/ conleybuilt
Thanks for all the great videos, Shane. I have been riding and working on dirt bikes for 20 plus years. I have really enjoyed watching and learning to how to do mechanical work from a professional.
Thank you! If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Show less
Smart channel great for ppl trying to learn Motocross and motorcycle rebuilds,doing a great job Shane buddy keep it up 👍
Chris Fillingham
Thank you for the kind words and sharing my work. If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
I just ripped through this entire 2-stroke tear-down series an am looking forward to the rest of the build. ... I am wondering just how many of these special tools are absolutely necessary, for a home-mechanic (working on a private stable of sub-liter bikes). ... I guess that I can rent tools or go Harbor Freight, as major operations are less frequent, for a private livery.
THANKS !!!!
Nice work love it reminds me of small engine repair class at career center
Thank you very much!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Great videos Shane! Thanks for the access to professional instruction!
Thank you! If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Show less
Shane Conley Where can I get this installer
thanks for the reply
thanck you very much for this channel just what i needed!
Thank you for sharing…below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
CZcams:
czcams.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Great job Shane enjoy watching all your videos all the time my friend
Great video. Thank you
Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench
Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "CZcams Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Good job ....thanks
Thanks for commenting and adding value to our community!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: czcams.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Shane, I really like the video and I subscribed your channel. It would beneficial for all viewers if you can take a tour of your entire shop tools like all the tools that you have and when do u use it. That will be really great.
Nice...we have done that in our member sessions and since its been over a year, that would be a great topic for the next Live Q/A
We sure love you taking the time to comment and subbing. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
2. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Hi I’m rebuilding a yz250, I replaced the bearings along with the bearing cap/seals and the crank as well. When I went to put the casing back together, it didn’t want to fully seet down. I ended up getting it about a quarter inch away from being fully flush but it won’t go the rest of the way down. When i tried putting a few screws in the block and lightly torquing them down to see if it would help, it caused the crank to freeze up and also made no difference in the gap in the block. Any ideas?
Where can I buy that tool to press the cases together?
10 sets of hands is pretty helpful.
🤣
so for my 1988 Yamaha ysr50 is it easy or hard to replace seals and gaskets if I don't have the right tool
I can help! Please use the contact form link below.
You're in luck. I do offer personal service to back up what's missing from a video to fix your specific problem. Live Chat is great for you to actually show your specific issue! Become a member of my website. It comes with a free HOW2WRENCH “Keep Wrenching” t-shirt or 20 mins of techline! Sign up now to have my personal cell phone number on speed dial!
As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of our learning community.
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
Contact form: how2wrench.com/contact/
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Direct link to services:
how2wrench.com/product-category/tech-lineservice-callminutes/
Donation link: www.paypal.me/how2wrench
My bike was smoking a lot fouling plugs and spoofing. I had a bad crank bearing so I split the engine to change it. I replaced both crank seals and the gasket. I accidently put the right seal in to far and had to pry it out to put it in the correct depth. The bike still smokes like a freight train. what do you think it is? I'm thinking I messed the seal up. but couldn't it be coolant also?
coolant will produce steam,oil burning is very noticable,and very smelly,plus check to see if coolant is contaminated with oil,and if the oil has emulsified oil(light brown to white sludge) in the crank filler or breather,telling you a seal is leaking,check spark plug for oil fouling,wet with oil,greasy looking.
I hope you got it fixed ,but if not try these clues out.
What exact tools would I need for a complete 2 stroke motocross dirtbike engine rebuild?
It varies between models but here is a good start. I've taken the time to make a list here: 2-Stroke Tool List: amzn.to/3d6LlMU
I can work directly with you and get you exactly what you need and be a call in techline for if/when you get stuck too.
Glad to hear my videos caught your attention. Here are the links to support us for this information and our work saving you money.
Join this channel to get access to perks:
czcams.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Give us a high 5 here: www.paypal.me/how2wrench
i'm going to split my 89' RM250 to get the crank rebuilt,water got in through the exhaust port and lay for a little while,i would expect the 2T oil to have coated all the bearings and thereby be no pitting etc,but i don't want to take a risk with this bike,
so i bought the tusk case spliter and crank puller/installer tools,do i need the web support tool also as the crank is pretty much sucked into the bearing rather than pressed,i cant see how it would deform the crank true,any more than bliping the throttle or popping the clutch,i've never took the engine apart to the crank before,and have no problem about that,just whether i really need to support the web of the crank,as it looks as if the crank is under no compression from the puller tool.
But then this is why i'm asking,as the dialogue in the video is confusing.
Great series though.
Thanks.
Thank you for the kind words. I can help you personally if needed through my website.
I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
How to do Transmission shims adjusting
Hello friend! Still have questions? Coach Conley provides tech help and works one on one! His CZcams and training center has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) He gets 300-400 requests a week. Become a member for his direct cell phone number and personal assistance!
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Scariest part of the build but i didn't like how i couldn't heat the bearing
Does anyone know the name of the tool that compresses the case together?
Hi Mike. I added the links in the description and here they are for you:
Amazon Tool Links:
Crankcase splitter/installer tool:
amzn.to/30dDUB0
Crankshaft wedge tool:
amzn.to/3cBrncX
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Details here: how2wrench.com/product/personal-tech-training-phone-facetime/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Heat up bearing and nothing more man.did it hundred times without any spliter or installer.cheers
@@throttlejockey3366 I used to do the same and my older videos on here (and when this tool doesn't fit the crankshaft). The big benefits of the tool are control and no burns...😃
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
Hi Shane, what type of gasket maker would you suggest using on crankcase surfaces? Silicone based/ rubber based? I'm still thinking which gasket maker I should use one my 2 stroke crankcases
Little late to this but highly recommend yamabond
@@2cthagoon392 I’m doing a 2 stroke would Yamabond 6b work?
@@calebcarinci2428 yeah that will work
@@calebcarinci2428 actually its silicone?
Where could I buy this tool and what's it called
Which tool? At what point in the video?
You're in luck. I do offer personal service to back up what's missing from a video to actually fix your specific problem. I do work on donations for my time and possible research.
Good news is its CHEAP! For my time would mind becoming a member of my website? It comes with a free 20 mins of techline and that will cover my time to assist you so we both benefit. So to have me personal cell phone number to put in your phone as your direct info and how to coach, sign up now! As always thank you and enjoy the free videos! Much more to come! I look forward to working with you and hope you will become a member of or learning community.
Link to membership: how2wrench.com/product/membershipmembers-onlymembers?
If I can ever be of service to you, here is a video explains how to connect with me.
czcams.com/video/vjvmB01ebcs/video.html
Direct link to services:
how2wrench.com/product-category/tech-lineservice-callminutes/
Live Chat is great for you to actually show your specific issue!
Donation link: www.paypal.me/how2wrench
What you used to compress the cases at around 2:08
hi shane can you use lock tight on the case bolts or is that over the top
steve nash yes use lock tight
No, do not.
dont
born behind bars you are not shane conley
Opps I may have misread...LMAO
ઓન્લી બજાર થ્રી વીલર ઓટો રીક્ષા રીપેર
Thank you for taking the time to comment! Hit that subscribe button please! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Coach Conley is also available for hire to personally work one on one with you if ever needed. Yep he is a real person. Give him a call @ 602-345-0432
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com