Restoration 3 way bass reflex speakers system // Restore things long forgotten
Vložit
- čas přidán 18. 03. 2023
- Thanks for watching, subscribe & share!
Restoration 3 way bass reflex speakers system // Restore things long forgotten
#mr_electricity #restoration #speakers
► Subscribe to channel: / mrelectricity1111
Please give me your opinion. Where is not good Let me improve.
------------------------------------------
Thank you for watching the video. please support me. Thanks you very much. love everyone.
All that hard work for those drivers!
This was really interesting to watch! 👍👍🔊🔊
Didn't shim the voice coils in the magnets, and that's REQUIRED to make sure they don't rub. Also didn't see him connect the speaker VC wires to the terminals and pass through the cone. He also didn't cover the terminals before spray painting. Also wonder where he got the new cones (which look nice BTW, good rubber surrounds. Otherwise, nice rework of the woofers.
Same issues with the midrange, NO SHIMS. WTF happened to the cross over networks! Also a Rube Goldberg pizo tweeter replacement there.
с опытом динамики можно центровать вручную, без прокладок.
у нас в россии есть такие мастера.
Entertaining? Yes. Real? I highly doubt it.
@@MrSITSERVICE у вас в расее мастера и клей лют в магнитный зазор? и вместо ВЧ впаивают таблетку? ну то да, согласен - мастера! И все это без филтров.
восстановление этих колонок как тут видеть можно только для просмотров на ютубе , звук для гаража даже не сгодится плюс ещё и микрофон не лучшый качеством ...Но ! то что я действительно из этого ролика оценил для себя это распиловочный стол - в таком исполнении очень интересном и удобным я ещё не встречал , появилось желание сделать себе такой же
При всех затратах, тут только контент для просмотров. Остальное такое себе. Дешевле купить.
26:12 te falto agregarle el cono a los piezo, el cono amplifica mucho mas el agudo que este emite
I agree with you on this. 😂
При сборке динамиков почему то ни какой центровки не делается, странно.
Потому, что это - полу-бичи с нулевым знанием правил построения акустических систем и динамических головок.
А таким горе-реставраторам накакать с высокой колокольни и на центровку, и на параметры динамиков... Всё-равно ЭТО на продажу пойдёт.
дак ты послушай как звучат,просто помоище)
Not to rain on you're parade, but after reconing speakers before I find it very sketchy that you didn't put some paper inside the coils before mounting them to assure totally even space. Then glue them, and I wouldn't have used those old reflex surrounds as it kinda looked like you did. Just leaving a tip for other DIYers that might try this themselves..
Excelente 👍👏😆restauración!!! Amigo
Thanks for making this video. You do wonderful work. Looks like you had to replace everything but the idea! But now they would look fine in a showroom.
Fabulous job ... you certainly know what you are doing. More please !
Очень красивые колонки получились и звучат качественно.Хорошая реставрация.
Колонки красивые в плане отделки получились звук полное говно
My friend you are a master restorer of speaker drivers beautiful job!!!
Без центровки катушки в магните? Молодец, жди перекоса при монтаже в вертикальном положении, звук кайф
И самое интересное.. а где фильтр? Хотя бы первого порядка на вч. На него прилетает полный диапазон, он сдохнет же
Ему плевать,видос запилил,бабки с просмотров собрал,колонки в помойку=)
Да тут полный пздц. нечего даже докапываться..
Thank you my freind . My Greatings for you from Iraq ❤
Superb work ido also the same job in this field but I don't have mechnery but I did accurate work manually.
Sehr gute Arbeit, die einzelnen Arbeitsschritte wurden auch sehr gut dargelegt. 👍❤️
*_That turned out absolutely gorgeous, dude! A fantastic piece to use for years to come! Please keep up this excellent work and videography! You are doing a fantastic job! 🍻🤘💜_*
S sẽ s
When it comes to glue, I'm all thumbs. Leaving it for the pros.👍
Brilliant restoration well done 👍
Lindo acabado y bien sonido congratulationes😊
Super 👍👍👍👍
very fine workmanship
bonita restauracion saludos
Great work as always
It is coil which gives good sound😊.. Beautiful
Какая красота получилась😊 Молодец! Очень понравилась твоя работа❤
Like some others I was immediately thinking way too much effort to salvage those old e-waste speakers but I don't want to harsh the video's mellow. Those great skills could be used on restoring some classic speakers in the future and we should give him some project ideas! Rogers, Advents? Others?
Exelente trabajo
Mantep wong serang kota hadir cerdas
I wonder where they get all the generic re cone kits from?
Naprawdę dobra praca , pozdrawiam
ฝฝีทือปรารีตมากสวยงามครับ
Great man 👍👍
Awesome
Best...
Well done, nice job 👍😁
They look amazing 👍
Ржавые шурупы в новую фонеру класс👍😂😂😂
Ну так раз всё обновленное, то хотя бы шурупы должны быть "антик"
God bless you brother
For the vinyl, you wrap around the bottom 1/4' and bring the other end all the way around over the 1/4' to the corner and cut square to the edge. They turned out nice
the best video
You're the best, follower from 🇲🇽
The best ? Una bestia semmai 🥴 nemmeno i così dei supert tweeter, per nom parlare delle viti storte dei woofer…
@@12al3xio Piccoli dettagli rispetto al suo lavoro di restauro!
2 things i have to say about this.
While you assembled the subwoofer, you didn't put spacers for good centering, its gonna be an issue (if not now, then the near future, when the materials will have some physical changes, due to movement) , failure rate is slight but possible.
2. thing that at the tweeters, for the leads that is copper wire that functions as the output lead, will gonna break real soon.
Aiwa did it in the past, because they made low quality crap speakers, and they wanted the user to buy their products every 1-2year or so.
For the second thing im not gonna put sand in your neck but the first thing was really a big issue.
The overall quality of the new box compared to the original box is not bad, or its about the same but with maybe a bit better quality of material.(while i talk about the original box, i dont mean the ruined/smashed/broken box, i mean when the speaker came out from the manufacturer.)
The one thingy that i almost forgot to mention that the reflex tube is not glued in place, i would have put a little glue, even if its a weaker glue, i would have applied some glue to the reflex tube, its just a little thing that some guys doesn't do, but it helps a bit for sounding, since something actually holds the tube in place, not just the hole.
He didn’t show ultimate Trade secrets deliberately, I notice this on other BLogs. It’s deliberate.!
Verry verry Good~
What humidity and time do to that fiberboard is brutal.
you put a sealer on it, water or moisture wont penetrate it.
great job,
Nice work
👍👍👍Amazing skill friend
За работу отлично, за звук 😢
Great.Respect.🙂👍
Nice work!
Awesome job
Love the restoration. Beautiful work
good working
Hi there... So you're using butyl acetate as solvent for the speaker glue.... Just for the german audience... That's Essigsäure-n-butylester 😉
Nice
Que gran trabajo !!!
Nice job.
Độ tỉ mi chưa cao.ló trep thạch anh để lơ lửng k dán màn che lại cho đẹp.sơn luôn con tụ loa và cả thanh gắn mấy cái cọc loa
Теперь с чистой совестью можно выбрасывать их на помойку)
В домашних условиях динамик отремонтировать качественно просто невозможно !!! Там нужны специалисты со специальным оборудованием и качественными запчастями !!
Hay qué nè.
Nicely done! If you put the woofer tee nuts on the inside then when you tighten the screws they compress against the wood making a stronger connection.
I have had t-nuts spin, in particle board, and MDF.If I recessed them, and added glues, that seemed to make it better.
@@davidhamm5626 I've not had that with MDF but particle board and MDF seem to have a mind of their own at times. It's definitely 'if it works, don't fix it!'
@@davidhamm5626 A lot of the commercial sound cabinets would put a staple across the Tee Nut, probably to help with the spinning problem. (Preferably not so that the screw would hit it)
Good job
Yeah Dude, this is great. You should do more HiFi Stuff.
супер малодцы мужыки сделали на совесть не чем не хуже чем завоцкое ато ищо и лудше...риспект молоцы🇷🇺👍🏻🍫☕🚬
ボイスコイルとマグネット間のクリアランスを均一にするために、接着剤を塗布する前に、スペーサーをかませた方が良いでしょう。接着剤が乾いてからスペーサーを取り去り、センターキャップを取り付けるべきです。
Красавчики, считается!!! 👍🏼👍🏼👍🏼
very good
Vou fazer a minha caixa oki :
Excellent
Они уже никогда не будут звучать как оригинал после этого))
звучат они крайне посредственно. жаль человека,столько сил,времени и средств потратил.
@@srv4everalone контент запилил ...
Me encanta
Можно сказать не реставрация, а с нуля собрал 👍🔥
but the piezo cone???🤣🤣
A piezo doesn't nee a cone - that original cone was just cosmetics, to look better
Don’t judge a book 📖 by its cover .
😘😘👍👍
Merci beaucoup pour votre travail bien fait et très instructif , mais j'ai gardé une interrogation sur un point : est ce qu'il n' y avait pas de filtres dans ces deux baffles car je ne les ai pas vus lors du montage , encore moins lors du démontage ,merci !
Is there a crossover ? Or at least high n low pass filters ?
e có đôi loa 1 bên nghe to đập khoẻ hơn bên kia lại bé là bị sao ạ
I would have done the tweeters with paper cones. Pizo tweeters don't put out the highs like normal tweeters do.
Piezo
@@shawbros I meant to go back and spell it right but I think someone got the idea
Where did you get the new cones from do you have a link?
Bonjour quel produit utilisez vous pour décoler les membranes et les spyder
Hello, what product do you use to remove the membranes and spyder?
Bien echo
My honest opinion?` You have good skills! But you waste them on garbage like these AIWA-Crap. They are not worth the money for a recone-Kit in the first place. So, I must admit, I just watched someone with amazing skills making Garbage out of shit!. The parts speak for themselves! Not real tweeter, but just a piezo chip... no frequency divider... and the motor of the woofer is also laughable. But you have 105K Visitors! That´s the true value here! I wish you furtherhin best success! Your work, as I said is amazing. I wonder what you could make with good parts and the will to make something high end....👍
Right, this is all for youtube content and "restoring" these turds really doesn't make economic or time investment sense... 3 ways on Ebay like this are like $50 a pair at most.
Great job but where is the crossover board?
👍👍
Certo che questo è in gamba. A pure la falegnameria. Penso che funzioneranno meglio di quelli della fabbrica
So about 10% Aiwa speakers. Great job but I do prefer a little higher quality speaker.
បងខ្ញំុចងបានកន្លើត១ក្រាដាស់១ហើយអាត្រនាប់ក្រោម១ អស់ម៉ានបង
Why don't you wear the orient sk anymore????
I've seen all your videos lately 🧐
Please bring it back 🙏
If you don't want it anymore I'll buy it 😊
Tendenzialmente è preferibile non staccare la bobina onde avere la centratura perfetta , in fondo è una parte che non si vede e non da alcun vantaggio acustico riverniciare il cestello.
Could have bought a pr of speakers for the time and materials in these!
Me gustaría saber si la bobina no quedó rosando
Also Link for the coils and spiders and cones for the tweeters???
Generaly, good job, but You have not exchanged capacitors.
He spray painted them, instead. Should be good for another 30 years...
@@AstrosElectronicsLab yeah...
Jks👍🙏👍👍👍🙏
Please provide two speakers for 50 watt
If i was me doing the restoration i would skip some of the cosmetics.... and put a descent 2nd order crossover at least
Capacitors only sounds awful.
Please try 🙏🙏 you have the connection to find components relative cheap
I have aiwa pair like this
Bro what liquid you have used to remove the old glue