Top 5 Bobcat E35 Excavator Attachments
Vložit
- čas přidán 26. 08. 2024
- In this video we take a look at our Top 5 Bobcat E35 Excavator Attachments
1:01 Hydraulic Thumb (BONUS)
1:34 24-Inch Tooth Bucket (#1)
1:48 12-Inch Trenching Bucket (#2)
2:23 4-Foot Grading Bucket (#3)
2:34 Hydraulic PowerTilt (#4)
2:48 PowerTilt (again)
3:39 Hydra-Tilt (Not Included)
3:48 4-Foot Grading Bucket (again)
6:47 Reversible Bucket Coupler (#5)
Thanks for watching! Please like, comment and subscribe.
Video Produced by Thrifty Garage (Please Subscribe!)
/ thriftygarage
Find us on Facebook (Share!)
/ thrifty-garage-1571631...
Connect on Instagram (DM me!)
/ thrifty_garage
As Always, Thanks for Watching!
- TG (Thrifty Garage)
Business Inquiries:
2401 E. 32nd Street, 10-248
Joplin, MO 64804-3177
thriftygarage@gmail.com
#TG #ThriftyGarage
MY Favorite / MUST have Excavator Attachments | Thumb Ripper Forks & Bucket | KUBOTA KX121-3 63
MUST have Excavator Attachments 47
Top 5 Bobcat E35 Attachments 61
Top 5 Bobcat E35 Excavator Attachments 61
TG,ThriftyGarage,choosing the right size excavator bucket,popular bucket optoins,popular bucket options,mini excavator bucket,12" mini excavator bucket,bobcat e35 attachments,bobcat e35 buckets,bobcat e35 bucket,bobcat e35 digging bucket,bobcat e35 grading bucket,bobcat power tilt,bobcat tilt bucket,bobcat e35 tilt bucket,bobcat e35 power tilt,excavator,mini excavator,mini excavator attachments,bobcat excavator attachments,how to change excavator buckets,installing excavator bucket
TG,ThriftyGarage,choosing the right size excavator bucket,popular bucket options,mini excavator bucket,12" mini excavator bucket,bobcat e35 attachments,bobcat e35 buckets,bobcat e35 bucket,bobcat e35 digging bucket,bobcat e35 grading bucket,bobcat power tilt,bobcat tilt bucket,bobcat e35 tilt bucket,bobcat e35 power tilt,mini excavator attachments,bobcat excavator attachments,bobcat mini excavator,bobcat excavator,bobcat e35 excavator,mini excavator review
Activate bucket tilt with key on, machine off, with the bucket hydraulics still attached but bucket unhooked, you will relieve the pressure on the circuit. Bucket needs to be in final resting position on the ground and machine/pump must be off, but the solenoid activated. It’s a bit of a hassle, but no leakage of fluid and easy hookup the next time.
I’ve done it. It doesn’t always work. If the temperature changes in the attachment it will also be at a different pressure and “lock up.” Best solution I have found is the QC Coupler Mate.
5:30. If you have a keypad, put ur code in, don't start, press 6 and then enter it will release ur Hydraulic pressure in your lines.
I have learned that you need to do this before disconnecting the attachment otherwise sometimes the attachment will have too much pressure locked in the lines.
Nice assortment. You've pretty much got everything covered. Take care and have a blessed day and I'll see you on your next vidja.
Super happy about the fact you rate the tilting bucket so highly. Just ordered a 4k pounds machine, had the choice of a tilting grading bucket, but went with the HKS XtraTilt. Now every bucket is a tilting bucket and every other attachment too. It adds 40 pounds to the arm but I am willing to pay that price for the versatility. Also the XtraTilt is now permanently connected to the hydraulic and all buckets are just dumb, passive attachments, making changing them much easier.
It adds so much versatility to this machine!
I have the same machine. I have a 12, 16, 20, and 24 inch bucket for diggingfootings. I also have a root ripper that works great for stump/tree removal. I bought an adapter so I can also run my auger on the excavator after I remove it from the skidsteer quick attach frame. I would really like to get one of those tilt buckets in the 36 inch size.
PowerTilt or a dedicated tilt bucket. I love the fact that the PowerTilt goes 180° but wish there wasn’t a 12” offset in the bucket mounting position. Makes the thumb basically useless and adds even more weight to the end of the machine. I love the 48” grading bucket but a 36” would also pull a lot of weight.
Try turning the machine off and turn the key switch to the on position with out starting the machine with safety handle down then cycle the 2nd auxiliary hydraulic thumb switch left and right to release the pressure from the 2nd auxiliary lines.
That’s the way it works on my Kubota BX tractor when I’m putting on my grapple.
I’ll give it a shot. I’ve tried it before and no luck. Sometimes it connects flawlessly and other times it is near impossible. The Bobcat T650 releases pressure when you push on the fitting.
czcams.com/video/izdk9kw_TxA/video.html
Agreed. Gotta twiddle the thumb button until the pressure is dead with the machine on, but not running.
I’ve tried it before when hooking up. But perhaps I need to do it before I disconnect as well so the hydraulic fluid isn’t locked up in the attachment. I wish the connections were the same as the T650. When you push on the fitting to release you can hear it depressurize.
That’s a nice assortment.
The truth about any compounded linkage it that you give up something else to gain convenience… capacity, response, weight, leverage… there’s always a trade off.
Thanks for your thoughts.
Very nice. It's a dream here in Paraguay.
It really is!
Thanks for the information. Very useful. I have a 18 and 36 inch buckets with a kubota kx057-4. I found that with a 12 inch bucket there's too much dirt that doesn't seem to dump. You're going to enjoy the ripper in you get it,.
Good stuff. Thanks for the review!
XBoom QC Mate Quick Coupler Hand Clamp sold through Skidsteer Solutions makes coupling and uncoupling the hydraulic lines a breeze. EVERY machine with quick couplers should come with one!!!
Dude, thanks for sharing! That is legit pretty cool!
With that machine could you run a mulching drum/ grinder. I think they need like 20 gallon flow. Thx very informative. I’m looking to by a small excavator.
If you look in the manual( yes we are men and not suppose to do that but sometimes its a good idea!!!) . Believe there is a way to release pressure in there easily to release pressure for hoses.
I believe the new machines with the upgraded control panel have the feature you are talking about. But this model you have to cycle the hydraulic when the machine is off or crack a hose.
I wonder if butterfly quick connects would help?
I started following the advise from The Bobcat Guy on CZcams. You have to turn off the machine. Turn the key back on and cycle the hydraulic lines to release the pressure on both the lines and the attachment. Works great now!
Got me sold on the tilt bucket, but I would have added a counter weight with it
It might work better on a machine that’s not a zero tail swing. Like the E42. I don’t think I can add any more counter weight. I’ve learned to work with it. But it’s definitely heavy. But super versatile. Way more than I expected! It’s probably hooked up 50% of the time.
A very nice review here. I'm about to buy my first excavator and a question I have is are all these attachments available aftermarket at a better price than Bobcat or do you need to mostly go with Bobcat. Thanks
Bobcat has some quality attachments. There are several aftermarket tilt bucket options as well as the Hydra-Tilt bucket from Bobcat at a lower cost. I have yet to find any aftermarket options at a significantly lower price without lower quality. I have yet to find an aftermarket replacement for PowerTilt. The rotations of swing is much higher than other options. One thing I would consider is a dedicated tilt bucket so I could maintain the use of the thumb. The RBC is aftermarket and I have also looked at a ripper attachment that is aftermarket.
Great video! I have all the same except the reversing attachment, does that get used often?
I’ve used in on several jobs. It really depends on the application. Typically I use it for technical jobs or when a normal bucket won’t work.
Do you wish you would have got an E 43 for heavier lifting and digging tree stumps?
Yes, sometimes I do wish I got an E42. But it is really nice to have the zero tail swing and we have definitely used it. But it does get light in the rear and we have definitely pushed it to its limits.
What pin are you using on your Hydro head? I have e35 with the x change. It does not come with a pin, and I need to get a pin to be able to use it.
When I bought the PowerTilt from the dealer it came with a pin. Seemed pretty standard. I know some machines don’t come equipped with the hydraulic x change and are pins from the factory. Should be the same pin. The dealer should have one. Or any place that sells pins or can make a pin for heavy equipment.
Not sure if anyone in the comment has said it already but if you put your safety arm down and with the machine off turn the key one click and it will release the pressure for the lines. Just make sure your arms on the ground.
We have tried releasing the machine pressure but sometimes the pressure is in the attachment. We have cracked lines before, but now use the QC Mate Quick Coupler Hand Clamp | XBoom (works great!). I heard for every 10°F temperature increase or decrease there is a significant change in the internal hose psi. Makes since to me.
Did you have the name or brand of the tilt bucket were I can order?
It’s a Bobcat attachment. Name is PowerTilt.
what brand is your tilt bucket ??? TIA
Bobcat PowerTilt
@@ThriftyGarage thank you
Is this the 24 or 33hp one ?
I’m pretty sure it’s the 25hp unit.
Dude all you have to do is push 6 on your lcd screen display to your right and depressurize machine hydraulics