Something's not right... I'll fly anyway.
Vložit
- čas přidán 27. 08. 2024
- This quad has been giving me problems for a while.
Decided to just reset Betaflight, but the issues still there.
Accidentally put on the props on backwards, which was a first for me.
Changed to stronger motors.1404 3500kv to 1404.5 4500kv.
I like flying here because all these buildings are up for lease.
4th battery was actually good but my vista/goggles glitch and didn't record.
Got any tips, drop a comment, thanks!
#drone #sub250fpv
Sorry I thought audio would be better now.
I might have made it worse.
Love the video
If your motors don't sound good at high rpm, replace them. I am using RCINPOWER 1506's on a 4 inch and I had a runaway due to bad motor bearings. If new motors sound like that you should RMA them.
I think if they sound bad, it's partially from the 3035BN props, the 3052's sound a lot better. Im going to keep that in mind though since it has done a lot of strange things lately.
@@lolthekidison Spin the motors by hand. If the bearings are good, they should have a smooth even tone. If they sound gravely, the bearings might be failing. If they get bad enough, they introduce a lot of vibration which can overwhelm your flight controller. After a flight yesterday, I have one motor that now sounds like a zipper when I spin it. I don't know what that's about.
@oneRella These motors are particularly notchy compared to the Happy Models I used to use, but still perfectly smooth. The issue was the same with the previous motors as well. It could definitely be something bugged with the gyro.
nice video brother 😁
@@itsNickFPV Really appreciate that, thank you.
Dynamic idle of 35 should be plenty. I’m not sure you’re going to enjoy of the feel of the quad with dynamic idle set to 65. Could you try increasing your anti gravity gain and letting us know if that helps?
You are right it doesn't feel as good to fly with higher idle. I'll certainly give anti gravity a try!
How come to me it looks like back right motor slack check your screws
@@allanfolkes8723 They are fully tightened, directly to the carbon. Sorry if I misunderstand what you mean.
The same thing happens to me, did you manage to solve it?
Not yet, had been waiting on a few parts for all the quads to arrive. Will let you know/try to make a video.
@@lolthekidison Ok, thanks. i hope your resolve it
W video
Glad to hear, appreciate it!