Newlyweds Established sign (CNC)
Vložit
- čas přidán 27. 08. 2024
- On this video I will CNC engrave a Newlywed couples established sign. This sign is done on 3/4" Oak utilizing Vcarve and profile cuts with a 90v and 1/4" and a 1/8" end mills.
Iwata Revolution airbrush
amzn.to/3eR3Mth
Nema 34 Stepper motors
amzn.to/3osYXtd
Whiteside 90 degree V-bit
amzn.to/2BTIqL8
Whiteside 60 degree V-bit
amzn.to/33TrIpy
Mach 3 by Artsoft
amzn.to/3bAzj0q
3M Worktunes with Bluetooth
amzn.to/2S7EBK9
3m Safety glasses
amzn.to/3f3C5xm
Dust mask
amzn.to/2QCf6Ad
Camera quick release
amzn.to/2RDmNX8
Sony Handycam
amzn.to/3bH4Jm6
70" tripod
amzn.to/3wo9gSg
Yonico 1/4" end mill bit
amzn.to/3oA0DkC
1/8" end mill
amzn.to/3wo9t80
1/4" Ball Nose bit
amzn.to/3v7xX5a
1/8" Ball Nose Bit
amzn.to/3oDyWrs
60 inch ball screw (need 3 of these)
amzn.to/2RtWTVU
Pair of Linear rails 60 inch
amzn.to/2T5CTtj
3kw air cooled spindle
amzn.to/33THiBF
breakout board
amzn.to/2T0m3fg
z axis sliding table
amzn.to/3ylKe7T
Hi Brian, WOW, that turned out great!!! Thank you for sharing! Hugs and love to you and your family. ❤✝🤗 Have a beautiful and blessed week. God Bless ❤✝🤗
Thank you, using Oak always make them look better in my opinion, it just cost a lot more per sign...Thanks for watching!!
As usual awesome job Brian. Keep up the good work and thanks for sharing.
Thank you and thanks for watching!!
AS ALWAYS ANOTHER EXCELLENT JOB, THEY WILL LOVE IT 🦅💗🤍💙🦅
Thank you and thanks for watching!!
Lovely job again Brian
Thank you, I'd love to do a lot of stuff in woods like Oak, but $$$$ stops me!!
@@SmokeysCNCWoodworks I use lots of reclaimed timbers. Old furniture etc, it does need skimming to remove surface layer. & Often a feed of oil as it's old & dry. Downside is it's never regular sizes & needs the extra work & glue ups, but often beautiful finish of well seasoned timbers. Cutting into old pine releases that ...Mmm aroma. !!!
I love the rope detail. Good job, now let's do another photo v carve. Lol.
Lol, I"m working on a good photo for, believe me I like the Photo Carve too, its amazing...Thanks for watching!!
Such inspiration!
Looks great. Nice job and thank you for the video!!
Thank you and thanks for watching!!
Awesome
You should look for a house in Arizona. Then I could come watch the cnc run. Good luck on the house and shop hunt.
Lol, its beautiful out that way, but our grandson lives in the norther part of Oklahoma, so I Imagine we are going to moving closer to him, I'm still working on what i'm going to do with some of the wood you sent!! Thanks for watching!!
Nice Work!
Thank you and thanks for watching!!
couldnt you run a profile toolpath and cut it out with the cnc ?
Great job. Is that waterproof stain and sealer you use or just stain?
Where did the rope file come from?
Why in the world wouldn’t you have your cnc machine make that cut out?
I love the video and hope to have my CNC in a week or two. I am new and learning so just wondering why did you use the jigsaw and not let the CNC cut the perimeter?
I could do the whole perimeter it would have however added another 35 minutes to the cut, I can use a jigsaw much faster....basically i'm to impatient and get tired of watching it go around and around......Thanks for watching!!!
Great plaque. Really like the rope edge. Did you do this in Vcarve Pro? Thanks for sharing.
Its a Vcarve toolpath, Vcarve pro should be able to handle just about anything I do, I actually run Aspire....Thanks for watching!!
Great job as always, do you thin your paint for the sprayer?
Usually the only color I have to thin is yellow and green, I'm not sure why that is....Thanks for watching
A chance show a bit of tool path? Great work as always smokey. I use v carve pro
I can do some tool path stuff....or are you after this particular one? I can send the graphic...Thanks for watching..
How much for the file on this one?
Did you seen my homemade CNC mate
No I haven't...I'll run over to your channel and check it out!....Thanks for watching!!