Great Video: How to make 2-Part Silicone Mold | Part 1
Vložit
- čas přidán 12. 07. 2024
- Link to PART 2 - Casting the Urethane Part: • Great Video: Casting a...
Making a 2-Part silicone mold is an essential skill to learn for casting polyurethanes. Using simple methods developed over several decades in Rapid Prototyping, learn how to make a silicone mold that produces high quality parts.
For 40 years, BJB Enterprises, Inc., an ISO 9001:2008 Company, has been in the business of formulating and supplying quality liquid resin systems to a vast array of industries and with a myriad of applications in mind!
BJB offers a complete line-up of Castable Polyurethanes, Epoxy Systems, Silicone Casting Rubbers, Polyurethane Foam Systems, Aliphatic Water Clear Urethanes, Sprayable Polyurethanes, Pigments and Release.
Be sure to visit our website:
www.BJBEnterprises.com
0:00 Introduction
0:47 Rigid Plastics
0:52 Rigid & Flexible Foams
1:08 Two Part Silicone Mold
1:55 Primed and painted with clear auto paint.
3:25 Double-Sided Tape
4:28 Cut Thin Strips of Tape
4:33 Apply Thin Perimeter
4:39 Measure & Mark Master
4:49 Peel Off Backing & Place On Splitter
5:10 Fill with Modeling Clay & trim with Shaping Tool
5:46 Feathered Edge
6:04 Demold clean part simulating an injection molded part
6:17 Styrene Sheet
6:32 Fasten with glue or tape
6:51 Pre-Molded Keys
7:57 Building Blocks
8:02 Large Diameter Pipe
8:14 Silicone can form a mechanical lock on rough surfaces
8:22 ABS Plastic Sheet
8:50 Making walls too thin can cause distortion
9:02 Mold box with clamps incorporated
9:11 Hot Glue to Splitter Board
9:37 Tin Catalyzed (condensation cured)
10:12 Sulphur Containing Clays
10:27 Run Small Test on Unknown Surfaces
12:25 Use a mixing container with plenty of room for expansion.
13:14 Continue pulling vacuum for several minutes.
14:39 Aerosol Spray creates a texture
15:38 Plastic Rod
15:53 Provide Make-Up material from shrinkage.
16:24 Vent Risers
16:51 Risers decrease wear on the mold
17:14 Equipment Injection
17:32 Placement of fill port & vents is a critical detail. - Věda a technologie
THIS IS PROBABLY THE BEST MOLD MAKING VIDEO ON THE INTERNET
Little correction, not only on internet but on earth. The best explanation and demo.
Might be the nicest silicone mold I've seen done
Wow, thank you very much. We try to show some of the best tricks in the mold making process so our customers have the highest chance of success making great parts.
I am brand new to resin-ing. I'm miles away from pouring my own molds, but I have so many awesome ideas that require I learn how!
When this video popped up I knew I had to watch it. (Actually I had to watch it a few times bc I didn't understand some of the silicone/molding jargon the first times, that's how new I am to all this lol)
But wow!! Did I ever learn a lot! With the simple, easy-to-follow instructions and your skilled guidance and explanations, this looks totally doable for me when the time comes.
Thank you so much for sharing this with the public. Very appreciated.
This video is one of the best training video's I have ever seen. Fantastic job.
One of the best tutorials I have seen on CZcams. Good job sirs.
I have to say this is by far the clearest, most helpful and informative video about casting I've seen so far. Really helpful, thank you.
Brilliant, Brilliant, Brilliant!
Thank you so much, I am a South African so there is very little chance that I will be able to do business with BJB and yet they make this content available to all of us for free. High quality, in depth detail regarding the holistic process. You guys are as generous as you are skillful!!
+Grim Falcon Wow, thanks for the compliments! Although we've pretty much shipped all over the world, getting product to South Africa is indeed expensive from the US.
Excellent tutorial. You know you have a rational, technically minded instructor when they've opted for a tungsten ring over a gold one.
Haha, good eye!
It's definitely the best "how to make 2-part-silicone mold" video on youtube !
Everything is clear and informative. Thank you for your amazing job !
Wow, thank you! We do our best.
A very good video. Comprehensive coverage on everything. Very well presented and with ALL the details that are so lacking in so many others. Great. Thankyou
What a great instructional video! You covered everything I have been trying to figure out myself thanks!
This video is extremely informative. Thank you.
EASILY the best video I've seen on the topic, by far. ..Very professional and informative but still kept it as simple as possible.. Keep up the great work.
Wow this is like "next level" mold making. It looks so precise, clean and professional!
I'm with the crowd on this one! I've watched dozens and dozens of instructional videos while I've been learning the silicone mold making process, and this one is like an epiphany. Thank you for the clarity and for sharing your skills.
Wow, what a compliment. Thank you! Be sure to subscribe and share!
By far the most clear informative video I’ve seen. Great job !!!
I found this tutorial exeptional in explanation and found the detailed reasons why a certain procedure is executed very helpful. The teacher was very clear and professional in speaking and was easy to understand. The lack of any background music was also very much appreciated as it was not present to drown out the presenter and also because I suffer from misophonia, a hearing condition. Thank you very much for your very well presented presentation about your products and the processes in which to use them effectively.
ytfp $#€×*&?€&7'^_' aew
Definitely one of the best tutorial I've ever seen!
I rarely comment on any CZcams videos but I have to now because I think you guys deserve it. One of the best tutorials ever and exactly what I need!! I'm jumping onto your website now. Please keep up the good work!
Wow that is awesome! Thank you for the kind words and we will continue putting out great content!
I have to agree the best training video I’ve ever watched bravo job well done and extremely explanatory thank you
This is the best mould making video on CZcams! So clear and informative, straightforward with 100% of the video on topic! Thank you so much, I was almost going to give up making my own moulds but now I shall definitely be doing them. I shall see if your products are available in my country and if they are I shall definitely be buying from you!
Really accurate mold making tutorial! Nice & helpfully!
That was a very very helpful professional mold making tutorial. Thank you so much.
Just found this. Extraordinary in every way; content, delivery, and production.
Thank you!
Thank you very much. I have watched this before but didn't remember some important details and my first cast didn't turn out well. After watching it again I noticed every detail you included to make the cast part look perfect. Thanks again.
Realy realy great video. Nice info, good sound and lighting, and it realy shows me, that you know what it is all about. Thanks.
+hfranke07 Thank you on all points! The new light stands in our studio are working, then.
Thank you very much, really great insight. You guys rule!
wow..! what a good and beautiful teacher..! BIG THANKS
Perfect tutorial... amazing example which build's up hope and makes us to think in a new... method
Excellent tutorial video! Thank you!
best video i have ever seen thank you great job!
💙💙💙All of your tutorials are extremely helpful. Thank you!💙💙💙
.
Thank you, perfection
LOVE the details. Very Informing.
one of the best videos ...
I'm super impressed with the care taken to very clearly detail the mold making process. I can't imagine a better mold making tutorial.
Hi Dustin, thanks for the compliment. This video is representative of our company's knowledge and experience in this industry. If you have a project or application that requires mold making and casting, consider us as you source! info@bjbenterprises.com
I agree Scott, best Video I have seen to.
thank you for the great hints I have ben making molds for candles for years just never for making plastic.
You can make almost anything like traffic light parts, car wheel covers and even spare parts for old toys.
This tutorial just made me think of establishing something called 'The Robot Hospital'.
An easy to follow tutorial, I'm gonna try this with a 3d printed trinket to make more for cosplay/props.
Thank you for sharing an excellent tutorial.
Great video and level of detail! Thanks
Exceptional video, very very helpful.
Great job!! Thank you so much!
Great advice, thanks.
First vid that’s told my why I shouldn’t take the pattern out of the mould at the mid point.
Great video, thank you !
Great stuff. Thanks!
Very very interesting, excellent video tutorial
Very informative... Thanks!
thanks for this video. great job.
Excellent explanation. Learnt a lot. Thank you
Excellent, and very informative. Well done.
Perfect!
Very well prepared and informative video!
Just wow, Thanks sir
AH! Plenty of thanks! I am learning to make molds and casting, but was not aware of the feed and vent tubes, and how to position them.
I seen some examples when peple pour resin into the first half, and then place the top mold part on top- but that will surely guarantee the pry line, and maybe some stubborn bubbles.
Thankss for sharing BJBEnterprises
Excellent video!
Great vid!
Great Video! 5 star!
Extremely interesting, this is great
Excellent , thank you.
Excellent video that gives me the confidence to reproduce some (unavailable) plastic parts missing from my Jaguar XK8 project car that were missing when I purchased it - Many Thanks
Not sure how 133 people can thumbs down your efforts, I think your vids are brilliant - cheers :)
Thank you Lee, we're not sure either.
@@bjbenterprises I worked it out.. jealousy :) keep up the good work. i've only recently started to master 3d printing but you can't beat PU systems by the looks of it, for repeatability and speed.. i just know your vids are going to help me no end in my new job role. A million thanks for disambiguating it an making it look easy.. 10/10 from me :)
Wow! What a clean mold. Well done!
Thanks!
instructions very well done
great video! it did really neat
excellent, i feel much of the concepts apply professional injection molding
Thanks, complete video
very helpful, thank
Great video thanks.
Great video. Thank you
Excellent tutorial! Quick, simple, no interjection of personality, nor loud music.
Yes, cause god forfrikkinbid that someone in thei corporate takeover world dare to exhibit a personality which might cause you to have a feeling
Excellent !!
Very nice!
excellent video !!
Fantastic thank you
well presented-- thanks ..
Great video.
An excellent video
Excellent video. Fantastic detail.
ChiaraDental n
awesome!!
great video
Great job
Excellent
im very enjoyed the video. thanks
Bravo
Very clear
Wish I watched this one first, I could have skipped the 10 I watched before. Great video and thank you : )
I am practicing with molds. One part molds are simple ad easy, it's the more complicated sculpts and small hands that are challenging.
Wow! Plastic heat injection mold will have the run for their money.
Perfect
amzing man :) thank You
Very nice instructions
👏🏽👏🏽👏🏽
Congratulations from Brazil 🇧🇷🇧🇷🇧🇷
Parana state
Araucaria city
excellent video. cristal clear and very informative
Francois Mayer Thanks!
Fantastic video, very calming to watch and listen to. Just discovered the possibility of a silicone mold. I am very eager to try this myself one day. Thanks!
Thank you for the feedback! It's a great skill to learn and hopefully we have given you the confidence to go try it.
Check out silicon putty, that is super easy
Diane Dragon soso
Excellent EXCELLENT training video. I have shared it quite a bit with my fellow hobbyists.
Thank you for that. We're happy this info is getting to those who appreciate it. Also keep in mind that we have all of those handy items that are used in the videos like vents, fill ports, funnels, registration keys... plus the mold making and casting materials. www.bjbenterprises.com
I’m in the process of making my list of products right now. If I contact you all via email, are you guys pretty responsive? I’m not sure exactly which silicone to pick for my particular application.
@@petebutler5139 yes we typically respond within 15-30 minutes, or you can use our chat feature. Send any material questions to: info@bjbenterprises.com
Although, this video is too old, but it have a big value
great video! learned so much with this. I have one question though, is there a way to make a mold having multiple masters in it so that I can cast 2 or more castings in one batch instead of having to waste time and silicone on 2 separate molds? I was thinking multiple funnels/runners that leads resin from one area to another, do you guys have a video on this?