How To Remove Diesel Injector Seals The Easy Way TNT#29 Bodgit And Leggit Garage
Vložit
- čas přidán 5. 09. 2024
- business and permissions inquires bodgitandleggit@gmail.com
www.paypal.me/...
ko-fi.com/bodgi...
/ bodgitandleggitgarage
www.gofundme.c...
bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty
www.bodgitandle...
bodgitandleggit...
bodgitandleggit...
/ bodgitandleggitgarage
/ bodgitandleggitgarage
In this video we show you how to remove a diesel injector seal the easy way in modern diesel engines injector seals can be a nightmare to get out of there is loads of different ways and loads of different tools I'm showing you one way in this video especially when the injector seal is leaking and it all carbons up they can be very difficult to take out so we show you an easy way to remove the injector seal before cleaning and reinstalling everything
Just use a copper magnet. They're next to the tartan paint at the shop
Badgertronix I found my copper magnet in the long weight store. Took them ages to find it though.
im looking for a box of sparkplug sparks.
Sky hooks are guite good too.
A round tapered file is all I've ever needed. One tap with a mallet, twist and tank. job done.
Used one of those slide hammers myself & got the job done! 👍
Thanks for the video. I used M6 Rod to remove copper washers. This can be another option for DIY guys.
Nice tool 👍 I usually get away with a flat screwdriver and a tap down and couple of turns and up it comes with the screwdriver 😀
Always enjoy your video's
Great vid mate I used an Allen key welded on the end of an old screwdriver love your noledge. Great as always 😁😁👍
Thanks mate
I spent a lot of time fishing injector seals out of Hyundai Santa Fe engines, I always used a metal wire, like the ones used to weld with the oxyacetylene torch.
Injector available 🙌
Nice1 Leon, definitely going to look for that tool, I don’t do injectors often but when I do the little hook that I use takes quite few attempts 😁👍 cheers mate
One of them things once you've used it you'll wonder how you live without it especially when you get a really bad seal
'Brassy, Goldie Ring'.........Leon, you never said you knew my ex girlfriend......Another diesel video.....HOORAH!!
Brilliant, I think as not sure what car it is but shall have a go on my own car so thanks, easy to understand :-)
Sorted. Beats my 5mm taper tap welded to a t handle. Sometimes the seal just spins in the hole
As long as it works mate that's all that matters
How do you take the leak back lines off from a Hyundai santa fe 2011 model 2.2 diesel - without breaking them please ??
Easy and fast! Thank you for another great video!
Nice one. Poor mans tool: coat hanger bent into a hook! Probably need to do mine again in the spring as i can smell diesel again...
Come do mine. Lol. Hope u have a fantastic new yr mate. Sorteeeeddddd
I have a small leak on one of mine is their a temp fix by tightening it up untill i can get it in a garage this week? Really need to use my car early tommorow.Thanks
Great vid Leon 👍
You are the king!!!
Yes i am🤴 LOL
bodgit and leggit garage 🙄🤔😂
Or you can get and unwanted big Phillips screwdriver and cut a threaded groove in it 🙂
Great video thanks again 👍
thank you you help me lot in a lot truble
glad to here that mate
Very useful tool.
Nice video. Can bad injector seals cause injector fuel leak? Any help on this?
hi mate I'm not 100% sure what you mean but a bad injector seal can cause a lot of problems the engine will not run properly the fuel will not burn properly in some cases the engine might not even start
If you tap it loose you can push a milk bottle cleaning brush through it, simples......
Excellent tip mate
Nice tool, but that will not go into my last two injector Chambers of my Viano V6.... No room. What else?
Hello ,can u tell me how to clean the hole inside can use brake cleaner??
I'm going to be doing a video shortly and how to clean this and also how to recut the seal
Será posible conseguir este vídeo en español?
Nice tip! Another 1.8tdci or same one?
if you ain't got the tool just use flat screw driver that just wide enough to go into copper washer hole slightly turn till it pushes on to washer hey presto its out
It all depends because most of the time I'm it blows out the centre of the copper washer and it misshapes it going other words the whole gets bigger than the whole inside the engine and it doesn't always work
'Easy and fast, that's what's most important. Nope. Not damaging the seat like wot I did, that's what's most important. Thanks, but I was too late in finding this.
So many lazy people out there 🤣 great tip Leon .
Hahha yes lots mate
Get the gas bottles😁😂😂😂
I have a stuck injector seal at the mo,, Trouble is the washer hols is slightly bigger than the hole , so cant get a grip on washer,,fcukin nightmare
Hi mate one trick I've used in the past you can soak it in brake fluid or WD40 make sure the piston is at top dead centre make sure you have cleaned down into the engine bay as best you can try and loosen up and then get some compressed air that also works
Long flat head screw driver does it👍
Not when the centre the whole gets misshapen because the centre of the washer becomes bigger than the whole inside the engine block to a flat blade screwdriver will not work
What's the part number for the injector seal lifter tool
Nice one… If Only i could find 4 Injectors here were i live at a normal price . They are Stupid expencive here. :( i Own a s-max whit injectors from hell :P lol
Great tool..have that one myself..never let me dwn..ya sound like youve the flu leon do ya
First
Lol
Made up for you, congratulations
@@Arounadabout thank you!✌
So ture, lots of lazy people out there. That's a great tool for the job at hand.
Injector available venum na message pannuga
I'm sorry to be that guy but, "How to remove injector seals"!! Get an injector seal removal tool..... obviously 🙄
absolutely not like I explaining the video once the centre is misshapen and injector removal seal tool will not work like I have shown in this video and lots more videos so it's absolutely not obvious at all