My Yamaha R15 V3 Gets Carbon Fibre Fairing Panels In India: Installation, Cost Explained
Vložit
- čas přidán 12. 09. 2024
- A full fairing (including all the plastic parts on the bike) in carbon fibre for the Yamaha R15 V3 will cost upwards of Rs 25,000/-
The carbon fibre panels in the video have been made by BlackMagik - a small firm run by Adhitya and Sohith from Anantapur in Andhra Pradesh. You can check out their work at / blackmagik_in
These boys specialise in carbon fibre moulding and can do any custom part as long as you can provide the original parts to create the mould.
You can contact Adithya from BlackMagik at +91 81971 56892
I'll probably get these panels double coated in clear for the pop effect that I spoke of in the video, and maybe do a follow up video.
DISCLAIMER: I did not pay for these carbon fibre panels. They have been made for my bike free of cost by BlackMagik.
For more on my Yamaha R15 V3, you can check out this playlist: • Yamaha R15 V3 Customis...
If you like my work and want to know about the modifications that I make to my motorcycles, you can check out my Instagram page: / abhinavbhatt19
This video was shot at Speedmonks Performance Centre in Mayapuri, New Delhi. For any motorcycle parts, tyres or service requirements, you can reach out to Atul Singh at: +91 98115 17624
For those in Gurgaon, you can visit the main branch of Speedmonks by contacting Gilles Singh at +91 95991 00494
Thank you so much for giving me your time. I hope you have a great day.
Cheers
Finally after thousands and thousands of years 😂😂😂😂😂
True😂
And still not know top speed after upgrade the engine to 180cc..😄😆
Gf: He must be thinking of other women!
Me: When is Abhinav gonna give us a performance test of this blue beast?
HAHAHAHHAHAHAHAHA
Ya
Yeah waiting to see this Big Blue Bad BOy on Track to rip apart other small bikes
Athul has become old🤣 still v3 hasn’t been completed
Yeahh😂
His children will drive this beast 😂
Been waiting for this man.!!!!
Arun brooo 😍
Aara ith!?🔥
Basically oru vandiprandan aanenn thonnunnallo
Ambada pulusu 😂
Oh ningalum
Intro was epic🤣🤣💯💯
Hahahahaha
Honestly subscribed to this channel just to see this bike up and running..
One Eternity later 😂
I thought that you have abandoned this project.
Wow bro, in Indonesia the r15v3 motorbike with the std cc155 spec with pholish ported entry and exit holes, custom camshaft,throttle body 32mm, with aftermarket ECU and custom exhaust adjusting engine specs can reach 34.5bhp. It is specifically for racing but it can also be used for daily use. Your motorbike has not fully exerted its strength. With the same spec 180cc in Indonesia Here can reach 40bhp
the best thing about abhinav is that he doesn't pretend to be a guy who knows all intricate technical stuff and show-off . he literally makes content which anyone can understand. and that's pretty rare these days. so yeah. kudos to you, Mr.hi-guys-my-name-is-abhinav!
[btw i wasn't mocking you. i just love the way you say it. huge fan and I've been an old subscriber]
Thanks, brother. There's no point pretending. One should learn to be comfortable in their own skin :)
That intro! hahahaha!!! Brilliant!
Thought of it 15 seconds before the video started rolling :)
Finally finally wait is over 🔥
It's not over yet. The bike is not even close to ready.
@@abhinavbhatt yeah i knw i want to sae finally video on beauty 😅
Finally intresting content 🔥
@@abhinavbhatt please sir complete it.... 🔥🔥♥️
Loved to see R15 back again😍
Abhinav started a new year with this video ....R15 V3 lovers must watch this
The only R15 which deserves this is yours!
200000 yer later back with R15 v3 😂 ❤️
Finally 🤘🤘 bhutt Dino kee bad apka r15 v3 ka update Mila
People has been waiting eagerly for more than 2 years now, if i tell you something it might sound like a bit rough but you should make up enough time for this project because this was your first step in this CZcams platform and this platform of yours is all what now just because of this great project, so kindly get it done and your other projects will be enjoyed as well.
Will be waiting for this project to complete, its been so long waiting for it!!!😁
We do it b'cos its available, possible & can be demonstrated on youtube via a thoroughly enjoyable & informative video 🤘🏼 🍻
I never knew i had a carbon fiber manufacturing company and Abhinav considered me his friend.
I feel successful and happy at the same time.
Thanks.
JK I don't own a carbon fiber company the guy that does must be really talented (which i am lacking currently) I hope one day Abhinav will consider me his friend.
Hahahhaha. You are all my friends :)
Great video Abhinav!
I have a suggestion as you are doing performance mod on this machine,
If possible do mods on a RX 135 5 speed too those things are fast with mods you will love it!
But you need to get hands on it first which is hard.
Finally he remembered he has a r15 v3 too
The beast is back
When can we expect to the full walkover video for the R15. It's been taking too long. 😅
If possible try to source the ceramic wheel bearings for this bike. Less friction, less drag and they'll roll much quicker than the standard ones.
Honestly I don't think it's looking nicer than the stock panels
We should raise a campaign for this R15
#releasetheR15
wait. 4000 for one panel??? my cousin who makes drones, had made the body using CF, and that was like 4000 per sq feet of a single layer ! well, 4000 for that panel also seems like tremendous workmanship too! the moulds and clips! damn! your friend aditya is doing a great job!
Do recommend us for his next drone body or anything related to carbon fiber 🙂😉
@@adithya_k93 arrey you're THAT Aditya? Wow buddy!! I sure will! I've got your details from the description. You're doing a great job!
What diffrent on water carbon fiber and wrap carbon fiber🤔wich is orignal❤
Bro can you make a comarpasion race between stock and your beast please pleaseeeeeeeeeeeeeeeeeeeeeee i want to make the beast with your help please sir eeeeeeeeeeeeeeeeee waiting for that thanking you
man so so soo much thank you are being up good content no video is their on india sector of youtube thanx a lot sir
please continue with the work please and please
heart please if read this comment
Waiting to see when this project completes 😅
i subscribed your channel just to see this project completion.😐
I might get married when this beast hit the road
Tere bacche ho jayenge,bro.
Iska pata nahi.
@@popstar9939 I dnt understand 🤣
This is bs4
They discontinued bs4 and launched bs6
Now they have launched even v4 and r15m
But this project is still
Good contents, informative, honest reviews. Good work Abhinav bro.
when is it going to get over. we need to see the final beast that you have created
Man, I loved the series since I first saw it. Looking forward to the next video, a friend of mine also has a R15 V3 with full carbon fiber body.
Wow. Do share details.
Welcome back sir here i am waiting for you and this time something again interesting
Waiting for it Since Very long time
Just get it done sir.. We need a dyno run on this beast ASAP.
Please make next video on stearing damper for r15v3 👍
When are you completing Project R15v3?
Sir, Please complete this now
Hey man I am just waiting your 25 BHP r18 New videos.
Superr work man plzz we need more and more videos on this bike .
Keep it up man👍
Thanks
Maybe you need a RCB rims to the next content. Its make you bike more light
Those look dope!
Good to see atul after a gap.
You will be seeing a lot more of him in the XPulse build series.
@@abhinavbhatt spoilers🤞🏻🤩
I usually watch your mod videos in the morning while I'm having my breakfast.
Puts me in a good mood!
R15M looks really good. Waiting to see how it runs!
And about those indicators!!
What are they!!
They fit so well!!
Can you provide links for the indicators?
Thank you!
No link. I physically picked them up from Bangkok.
@@abhinavbhatt Aaahh.
The beast is back 😍 🔥
Common dude, half the subscribers u have here u probably got when u started modding the R15V3, maybe it's time to wrap it up soon so that we can see Indias 1st and fastest modded R15V3.😋😬
Bro ur missing from a year...???.... When you make topspeed of ur v3.!!
What happen to the engine tuning ? Take it to the race track n show us how much ur bike can achieve the top speed ... I have been waiting ur bike final results
Oh man... Finally 😍
Those carbon parts looks soooooo cool!!! It will be really awesome if you make a video on how these carbon parts are made in that factory 😆.
Adithya from Blackmagik, you can follow us on Instagram to know how they are made.✌
still not complete ??
Abhinav bhai you are living my dreams ❤️
I love the carbon fibre tank protection cover!!
Where did you buy that?
Can I get it?
Looks dope❤️🔥
I picked it up in Bangkok.
@@abhinavbhatt I can't get it🤦🏻♂️
We can make one for you, Drop a message on our insta @blackmagik_in
@@adithya_k93 ya bro sure❤️🔥
its 2024 Man where is the Update ?
is the bike still your Hand. please make a video.
Hi Abhinav as u have done so much for this beast ( size doesn't matter).
Try to get the weight under 100 kilos, I know its hard to achieve ,but since ur investing in this project so much of time effort and money, also think on getting the weight under 100 kilos.
And this is just an 💡.
And can I get my panels done for my fz v 2.0 ? Please answer.....!
I always love your content
Aree abhinav bhai kb ayegi new video eski bhit time s wait kr rhe hai 3 sall ho gaye nayi wideo
Brother another video of your R15 it's been ages
Such an overkill I love it 🤑🤑😍😍
So do I. Hahahahhahahaha
Waited for this since sooo long
And yaa atul is correct u are busy on other bikes😂❤
Well, the Honda and the RE really did take up a lot of my time.
It's very less priced for carbon fiber parts 4000 for 1 fender it is priced awesome
Waiting for next video since last year 😭
Abhinav how do you have USDs on your r15?! Did you import it from the east?
Abhinav can we get a updating regarding this one? Or did you stopped working on this?
There's no update on this bike currently.
Bahi aap ki puri bike modified krne mai kitni cost lagi hai total??. Or plz isi bike ko aap naked modified kro thiland walo n ki to hai pr boht gndi lgti hai...
Carbon fibre for life😤😤😤
Btw hello 4x4 baldy
Hahahahah
Last video of r15 in this channel
When will atul tune the bike 😂😂😂?
After my death
Plz reply bhatt
Still how many days U will do mods on it man ,complete it fast and make A video, plz,I am waiting for it
Bro, if you change the cam from the BRT "R1" type to BRT "R9" type, your bike can touch the 30 HP mark, wih over 180 km/h top speed
Wow. Maybe once I can max out the potential of the current build.
You're Indian Version Of Dom Toretto 😂. He Build Mustang And Ure Still Building V3 From Ages.
Can't Wait To See,When This Project Gonna Over,We Just Want It On Road.
Hahahaaha
OHH Abhinav is busy with others bikes😭
Please complete this bike ASAP
Your sound is like John Abraham
Finally 🥲🥲
Squid on a stock R15v3- let's race that blue R15.
Abhinav-in your dreams nigga!
*Atul* bhaiya looks like *ZOHAIR AHMED*
Great video sir! Could we get another video of you riding this beauty on the track?
Sir, as soon as it is completely ready.
waiting for more r15 videos
Sir we all wanted to know that how much this beast can f*ck all the 200cc to 250cc bike , this is so crazy man plzz finish it as soon as possible
If you want to learn more about carbon fiber i recommend checking out street bandito ! they do some insane work with carbon fiber
Sure. Will do.
Finally but we want more
More shall come soon.
When we will see this beast on road??
Plzz vlogs on r15 project 🙏
Ye project kahe khatam nhi hota re😩😩😩
What abt vibration of carbon fiber. And its good. Only bike lover can understand
Can't say till I ride it.
Would've gone for a suspension overhaul instead of spending so much on carbon fibre.
Looks great though! *Duh*
P.s- what type of carbon fibre is this?
Yamaha R15 be like " tujhe yaad na meri aai..... " I think this will leave the garage only after Corona has left completely.
Lol the intro was bomb 😂😂😂
Its not any performance mod..its not even a fun mod...its just friends promotion for free...or maybe not..😁😁😁
One eternity later we got an update on R15M 😀
Hello bro the link is nt working anymore can u help please I wanna buy this carbon fibre parts
Brother help me to source the same bubble visor in your bike it looks high quality and functional 🔥👍
Are bhaai bike ki video kaha hai top speed after upgrade?
Thanks abhinav ❤️👍
It's looking good 👌😍
Ekk kam karo super bike ka engine dal to v3 mai 😂😂😂 kitna sara modification kara hai bass engine change modification baki hai😂😂😂