TOP TIPS for Breaking In New Leather Boots - (ft. Stridewise)
Vložit
- čas přidán 26. 06. 2024
- Phil. 4:13
Nothing beats a great pair of quality boots! Once broken in, they’ll fit like a dream. In the mean time, that full grain, quality leather and those thick, rugged soles need to be broken in, and it can definitely make you dread wearing them. Have no fear! We’ve compiled the ultimate collection of tips and tricks to make breaking in those tough boots as painless as possible.
SUBSCRIBE TO STRIDEWISE!
* CZcams Channel - / stridewise
* Nick's 11 Ways to Save Money on Boots - stridewise.com/best-boot-deals
* stridewise.com/how-to-break-i...
OUR LINKS:
WEBSITE - potterandsons.com
INSTAGRAM - potterandso...
southernpol...
Video Edited by: Ashley Saldanha - Jak na to + styl
Ever since I was in the Marine Corps and having to break in new combat boots I always wore a synthetic thin sock and a cotton sock over the top of that. This helps to prevent blisters by allowing the cotton sock to rub against the synthetic sock and not your skin & the cotton sock allows for cushioning as well
that is a great bit of advice
Wish I knew that 25 years ago.
Still do that trick in the Army but with the wool green socks over the synthetic sock. Basically a dress sock.
Yep, just chiming in to agree. Thin thin dress sock with an over sock 🤘
I did the same thing, light infantry we did a lot of humping that was the best way to prevent blisters with new boots
This is like "The Avengers" of Gentleman's footwear. Great collaboration!
Yo this is my favorite comment, thank you!!!
0:21 I had to do a double-take here to make sure Nick wasn’t being called an Australian turd.
When I first started in construction someone told me to always buy the best boots that I could afford, the financial pain goes away faster than blisters. Someone else said to have 2 pair of work boots so that you can swap them out every other day. Both of these gentlemen were right and I have done this for 40 years now and it made a HUGE difference. Also don't wait until your boots are about to fall off your feet before you get replacements. I had a foreman do this once and by break time the first day he could barely walk and he had already thrown away his old boots. By the end of the week he was walking like a wino with bad feet.
Thank you so much for all the tips and tricks, please keep it up.
Darrell Hendrix terrific post brother. Right on. One thing I will add is that you should get a shoe drier. They are like $20-$25 and last for years. Put your boots on them after each days wearing.
You're the first construction worker I've ever heard of that own alternating boots
Often worked 12+ hours, 7 days a week always on my feet in all kinds of conditions. Wet/muddy boots were very common and I hated putting wet or even damp boots. Force drying boots made them stiff and rough looking. I would lay them on their side with newspaper wadded up inside to draw out moisture. Right after buying a new pair I treated them with neatsfoot oil, would substantially darken the boots but kept them supple with at least bi monthly treatment. Spent a good bit more on work boots than all other shoes combined. Watched a lot of other people have to break in another pair of, usually cheap, boots every 6 months to a year. I got 3-5 years out of mine, even the ones that could not be resoled. Take care of your feet, you only get one pair issued to you.🙂
Darrell Hendrix a good drier doesn't force dry. They are fantastic for extending the life of shoes that are worn in damp weather or that get a lot of sweat.
I buy Red Wing Pecos with steel toe for over 30 years , one pair for construction and one pair for casual dress ( mainly everything not working. )When I wear out the work boots I buy a new pair and turn the casual older pair into work boots so I don’t break in a new pair working.
There's no way there's anything in Nick's cup.
and despite "drinking" his mouth was getting drier
Not after the first 5 seconds anyway.
8:05 ⛲
I was scared he was going to spill it as he was talking.😳
Came to the comment section to say the same thing. You beat me to it!!!
Army basic training we were issued 2 pair of leather boots. One pair we had to mark with white dots. We had to alternate each day which pair we wore. If you were caught with the wrong pair on the wrong day, everyone paid for your mistake. That was my first intro to taking care of your feet and footwear. Almost 25 years later and long since out of the military I still alternate my boots.
So what is the motive behind alternatively wearing the both pairs? Thanks.
@@AmitKumarPune it gives the leather time to breathe. Heal if you like. It extends the life and not just because you only wear them 50% of the time. There are probably several reasons why this works out.
This can extend the lifespan of all your shoes, not just boots.
I attended Army basic training in 1983 at Ft. Sill, and that was our experience with rotating our boots every other day. We also had a white dot placed on one pair of boots. The Army forces you to take excellent care of footgear and uniforms. I alternate my footgear still.
@@HK-qj4im It also allows the shoes or boots time to dry out. Our feet sweat during the time we wear them. The shoes will then last longer.
@@stephenabm7779 It's mostly for drying out and keeping the feet healthy yes. Having wet foot for a prolonged period of time is really bad if you were out to serve in a prolonged scenario.
Also shoes when wore constantly take the shape of your natural feet posture (over proning or over supine). Having the shoe repair it's sole (even 0.2mm) could be a good way of keeping feet to a correct posture.
I wore 12's for years. The sole would crack and leak. 5 years ago I happened into a Red Wing store and talked to a salesman. Decided on a model and had a pair of 12s on the counter and mentioned "I hope these don't crack like every other boot and shoe". He stopped me, said "Wait a minute. It cracks where? Oh, you have the wrong size then!". He sat me down and popped out the Brannock tool and said "You're a 10.5 EEE. 12s will fit because the width is the same, but you're a 10.5 EEE border EEEE. The other shoes all cracked because you're bending the sole when walking or kneeling where it wasn't designed to be bent". Never turned back from buying that size except for a pair of Nike trainers. Those run extremely tight. Had to go to an 11 wide on those. The only way I'd buy boots or shoes online is if I'm buying something I've tried in person at a physical store.
If you’re looking for athletic shoes try Brooks. They make 4E in two of their most popular shoes. Any good running store will carry them.
I have worn 9’s for years but when I sent my foot outline to Nicks Hand made they recommended a 7.5 eee. I thought they were idiots but they sent me a test and they were right.
Get fitted properly
i feel you, i'm a EE in redwings and EEE in allen edmonds. WIDE FEET BOIS !
Definitely realizing that red wings run tight
Are you saying if I take my boots to redwings they'll give me a smaller pair if mine don't fit? I have a pair that my uncle gave me and they mean alot to me but they were to big and are wrinkling where you said
Brannock device. I bought one and after reading the instructions, learned something very important with the use of it. Do not JUST look at where your toes end to determine the size of your foot. That sliding gauge on the inside edge may show that your shoe size differs from where your toes land. For years, I wore a 13D and had to struggle to get them comfy. Then I started ordering a 14W and had better results. I learned from the Brannock device that my foot is actually a 15D by the side sliding portion. Based upon this, when I decided to buy some new dress shoes from Allen Edmonds, I ordered 15D and have been very pleased with all five pairs I've ordered. Yes, part of the problem is that my feet have changed over the decades. That's why verification from a Brannock device is important.
Break-In. Since the Allen Edmonds are leather lined, what I've learned is, to generously slather Bick 4 conditioner to the entire inside of the shoe, let it soak in until the surface dries and then put them up with shoe trees for a day or so. The outside immediately gets conditioned with Saphir Renevateur and multiple coats of their best cream. Then they get a few light coats of Saphir wax. I'm also slathering Bick 4 on the sole leather and keeping an eye on the condition of that leather. I have found that the Bick 4 conditioner does an excellent job of softening the leather, yet, does NOT darken the leather. It appears a shade darker when first applied, but dries to the original color. The increased suppleness of the conditioned leather aids in comfort while breaking them in.
Conditioning/Shoe Trees. It made sense to me when Preston Soto advised to condition brand new shoes. We don't know how long that leather's been without conditioning prior to purchasing the shoes. Since the Bick 4 is so reasonable in price, I use it generously on the inside leather of dress shoes, and all over for more rugged (smooth leather) boots. I save the Saphir for fine leather exterior leather on dress items. There is a very unique softness to the leather after the Bick 4, but no waxy residue. It also does amazing things to a new baseball glove, or an old one which has dried out. I have shoe trees for every pair of dress shoes/boots I own, and use them. My western boots look amazing still.
Thank you, this is great info. Just bought a Brannock device.
@@PPMOCRG Remember, there are men's, women's, and children devices.
@@RatdogDRB Yes, I made sure to get the women’s one. 🙂
What shoe trees do you use for western boots. I bought a pair of boots a long time ago and never learned how to care for them. Trying to make up for that mistake now.
When I went to boot camp at Parris Island in Oct 1968, we were issued 2 pair of black dyed all leather combat boots. During the week of company forming our drill instructor had us fill our laundry bucket with clean water and stand in it one foot at a time, 10 minutes each foot. Then we removed both boots, poured out any water in the boot, put on a dry pair of socks and wore the boots for 2 days, changing to dry socks every few hours. Yes, we wore them to bed the first night and the fire watch woke us twice during the night to change socks. These were the most comfortable boots I have ever had and did they ever take a spit shine! We didn't do this to the second pair and they weren't nearly as comfortable or easy to polish.
I had a similar experience when I went to basic in 1999. I have always wondered if this practice translates outside of military boots.
That sounds more of a hazing thing they did more than trying to help new recruits have more comfortable boots. Since they normally try to make you the most uncomfortable they can
@@seanmcguire7974 you speak from inexperience. Also, pretty ignorant considering the man just said he noticed a difference. This was more common practice than you think.
Puts a new meaning to "boot" camp.
Rotating boots/shoes with shoe trees is one of the best tips in the video. When I was working, it was easy for me to rotate shoes when I was at home. But when traveling, I always packed a second pair with trees for any trip longer than one night. Of course proper cleaning and treatment is always important. DFW airport always had a great guy who could bring the shoes to new condition during a layover.
Spot on. The Army taught me to keep three pairs of boots, or more ready. Always have a break in pair you work on, two pair minimum that are well broken in that allow you to change out daily (to dry). The fourth pair is for the field. These are really on their last legs almost. They should be very worn in. Also, they have been scuffed, drenched before etc. Be patient on break in. Don't wait until your current boots are falling apart.
I can watch your videos all day long and love the collaboration with Stridewise! More videos like this please. Leather care for different types of leather (horsebutt, calfskin, cxl, cordovan), boot reviews and sizing, how to identify a good cobbler. Would love to see your personal boot collections too! thank you for making these vids.
I rely heavily on the customer feedback for sizing information. I also really appreciate that certain retailers, like Redwing and Alden, provide additional information regarding sizing like “runs large” or “customers order 1/2 size down.”
These collaborations are cool. Stridewise, Rose Anvil and of course Trenton and Heath, some of my favorite channels!
Hope they'll do one in the future with Bedo's Leatherworks or Cobblers Plus.
@@hotwax9376 Bedo's Leatherworks might be a great idea!
😘😘😘
Great information guys. Love it when people are passionate about stuff boots, jeans, cars, sport anything !!!
Great advice gents! My Thursday boots hurt like crazy at first. Did the thick sock, actual boot sock, and conditioned the leather a few times and wore them around the house. They now fit like a glove and are my most comfortable boots. Wish this video was out last year when I was getting them ready. Thanks for all your help.
I’m about to buy a pair which ones do you have like captain? Is what I’m looking at
My Thursdays were the same. I conditioned them straight out of the box. I just kept wearing and conditioning them. They fit like a glove now. My Captains are my favorite pair of shoes I have.
Just got the Captains today. What type of socks are best to help break them in?
I have enjoyed many a weekend now watching you restore and save so many shoes and boots! Looking forward to getting the boots I sent in back. Thanks guys!
I haven't worn boots in years and I just picked up a pair of Thursday Captain Boots based on your recommendations. I'm in the process of breaking them in as I type this. This video was very helpful for some tips & tricks!
Love these channel collaberations!
Best break in video I’ve found. Thanks guys 👍
I have a pair of Allen Edmonds boots that I’ve only worn twice because they rub around the ankle. I’ll have to give them another try using your tips. Thanks guys!
Nice work guys. Thank you for all the information.
I’m really digging Heath’s cardigan
Needs a pipe and some fancy lad novel to complete the ensemble 🧐
@@jeffreygoss8109 And says "Yaas" on a regular basis. Lolo!
Moleskin is by far the best! It’s inexpensive and easy to customize for the area where it will be worn. It doesn’t move around, nor fall off.
Great video guy some fantastic tips, love the collaboration with stridewise great idea .
Keep up the great work .
And thank you
Love the camera angles & wood table addition 👀🍿
For my iron rangers I conditioned them and would wear them right after doing that and it seems to have worked extremely well for me, I did that a few times and there was a noticeable difference after about 3 times doing that spread out over a month between condition. When I bought mine at a small red wing store the guy told me just wear them that’s the best way to break them in!
Just starting the vid. This is AWESOME! Great collab! Your channels were the first in my discovery journey for boots and men's fashion. You are genuinely among my favorites with over 20 fashion, style, leather/shoes channels subscribed! Way to go gents!
Thank you so much!
When hiking we use two layers of socks to prevent blisters since the friction disburses through the sock layers rather than on your skin.
I've found that it's best to wear a silk, or silk-like sock, next to your skin, and a wool sock over it. The silk acts as a dry lubricant, and prevents blisters!
I always used a lady's pair of hose socks with a wool sock on the outside. That is an old Army trick from way back. You nailed it.
@binge go for a 15k hike and any boot will give you a blister, its not about fit it's about friction.
Fantastic collab! Two of my favorite youtube channels. Good tips thanks. Your camera is crystal clear!
Intelligent and helpful advice. Thanks guys for the wisdom
Great Video. Loved that Nick is getting that southern hospitality. Great Collaboration. Good information
Loving the collabs!
Great video!great information that I will try.thank you for making these videos.
This is really informative! Thanks guys!
That video footage is crispy!
When all else fails and you know that you have the right size, but lingering heel slippage, which leads to hotspots, I’ve successfully added a strip or two of leather to the inner heel cup right where I think it’s needed, with contact cement to more securely keep my heel in place. Unliked a fabric heel pad, it can be permanent if desired, and is natural leather, just like the boot. I recently tore apart an old Coach wallet for this purpose.
That's pretty interesting!
I just bought some Thursday boots. I started to wear them immediately and walked throughout Beijing. I had no friction, but they are stiff. My feet are not used to these from wearing mostly sneakers. I had no blisters but the muscles on my one foot did start to cramp up seriously. They are beautiful boots and when they are softer they will be amazing to wear every day.
My two favorite channels getting together. A fine Saturday indeed...
Glad you liked it Billy!
proper fitting is the key , for years i was wearing to small boots. now having proper fitting boots, no breakin issues. i have, Nicks, Redwing, Chippewa, and Thursdays. straight out of box, were allday no issues.
Love this channel!
Thank you!
You guys are all awesome sources of information, thank you! Not many cobblers around anymore.
Just 10-15 years ago in my area there were several, now there’s one (before Covid) not even sure he’s still around…I should make sure. Anyway, thanks again.
Love the colab fellas!!! 💪🏼💯🧦🥾
I buy online all the time. But the best way is to go to a store and try the boot on. That limits you to what can be found in stores. You won't be able to try on boots that aren't sold in stores. So you're stuck with Alden, Allen Edmonds, Red Wings, Wolverine 1000 Mile, and such.
Awesome video thanks for sharing. Stay well and safe guy's.
The whole *put your new boots on and take a shower* is only the 1st half of the instruction. The second half is *then wear them until they are dry*.
This is what we did in the Army when we got new boots. The boots would Form Fit to each person's foot, and then you could March for literally days on end, in the same pair of boots, without getting blisters.
I think the most bizarre breaking in tip I’ve seen was for Doc Martens boots (DMs as we call them on this side of the pond): fill them with scrunched-up newspaper, wrap them in a towel and then hit them with a hammer! Personally, for DMs, I’d be tempted to leave out the newspaper and towel.
Found out what the lower layers of my skin looked like when trying to break in DMs - and that was after doing a whole lot of breaking in - still haven't tried again. Made the mistake of walking too far one day and it turns out if you stick a menstrual pad on your heel because you've got those and not band-aids, it works well enough to get home on LOL
@@AllegraBottlik Doesn't help that the Doc Martens they make today are completely inferior quality and construction (and also differently lasted) than classic DMs. They're literally not even the same shoe. Just the same brand slapped onto poorly made imitations leaving a trail of unhappy, foot-pained folks behind them wondering wtf happened.
I'm wearing two pairs of thick socks both saturated in leather stretcher spray and I'm walking around the house and can literally feel the boots breaking in as I walk🥰
Good stuff... thank you!
Hey guys really like the video especially the end where you guys debunk some of the myths about how to break in your boots superfast, on that note just purchased my 1st pair of Red Wing Rangers and heard horror stories about how about the break in period is. The salesman sized my foot and I purchased the pair in the side he recommendedand I have had 0 breaking pains I mean I put these on with a new pair of socks in the parking lot then went and walked around the mall with my wife all day and a done a few days of yard work including getting up on the roof of the house no pain is this normal at all or did I make a mistake??
They do feel great on my foot not loose or sloppy BTW.
Was told years ago to place boots on their sides when not wearing to speed the drying out process and allow at least a day to rest before wearing again. This has made my boots last many years each. Actually I’ve not worn out a singe pair, other than replacing soles.
New subscriber here. My dad was a carpenter. He had all kinds of tools, some of which I have no idea what its purpose is. After watching several of your videos I recognize that he had a box containing a bunch of cobblers tools. I wonder why. Good stuff fellas.
Bought a new pair of engineer boots, Frye double buckles, and they are STIFF! Probably should've gotten a wider size but too late to return now, oh well. Going to try some of these tips, thank you for a GREAT video!
I'm currently breaking in a pair of Red Wing Iron Rangers. I went into the store and tried sizing down from my normal size as recommended and quickly realize it didn't work for me. A size 13 appear in my collection the most. So that's what I went with. The fit was generous and I was initially concerned because based on the reviews and recommendations the boots were supposed to fit somewhat tight. A pair of thicker work socks and an insole because( Redwing iron Rangers don't come with one) did the trick nicely. I've been wearing them four days straight and now they feel like a pair of sneakers. Vanity sizing is a huge mistake when making such an investment. Also your feet are often not identically the same size. My right foot is slightly larger than the left. Because of this I always try on the right foot first. I would rather have slightly larger shoes than shoes that are too small. Slightly larger shoes are an easy fix.
Redwings are bricks
Great advice on sizing. My new Thorogoods fit perfectly because I hit their website and read the sizing recommendations. I got a great deal online and they fit perfectly right out of the box.
Stidewise looks like he could be your little brother. Great info guys. I really enjoy the channel.
That's what I thought
😁
Haha I should be so lucky!
I use obenhauffs HD or mink oil. That loosens them up quite well.
I regularly wear a pair of red-wing moc-toe 1907’s and a pair of Sears Die-hard moc-toes.
Great information. I always thought the boot isn't fitting so i won't buy it, but it looks like a lot of people will squeeze in to get the boot they like. I hate uncomfortable shoes but maybe I'll try this the next time one isn't a perfect fit.
Fantastic content 👌 👏 👍
Lots of good info. I found your channel through Rose Anvil's channel. Also, Thanks for sharing this and another new channel that I was not aware of. The thing you said about messaging does work I did that for my rock roaster boots that I bought just to see what they are like again because Rose Anvil talked about them on his channel. Those Rock Roaster boots are now very comfortable. I also got a pair of Carolina but not because it was mentioned on Rose Anvil but it was on sale at a Christian store and I noticed they looked almost exactly like red wings. I still need to break them in as they are a bit too narrow and the narrowness is in the middle of the foot. Do they make those shoe stretchers that can stretch the middle part out and not just the toe area out? That would be neat.
I'd love to hear what some of your favorite wool socks to wear with your favorite boots! I discovered your channel today and love it. Thanks so much!
This is great.
Nick has done some great boot reviews.
Nick has also reviewed leather bags and denim which are worth checking out!
I want to know how the Australian gentleman didn't get tea or coffee all over him and his surroundings......
The cup is empty.
Exactly, so why have a cup in his hand??? It doesn't make any sense.
And he sips from it. That’s all I’ve been watching.
When I first got serious about boots, I bought some Redwings from an Amish cobbler/shoe seller. One thing he told me has been very useful ever since - every boot is made to a last, and you should find a boot that fits almost perfectly, but slightly tight from the get go. If it doesn't, that last doesn't match your foot shape and you'll have a longer break-in period, or they may never really fit your foot and it's okay not to buy boots that fit wrong. A little bit of tightness is okay since the leather will conform to your foot, but a really uncomfortable pair of boots is a bad idea. Online shopping is really difficult since you don't get the opportunity to try different boots and you don't have the expertise of an experienced sales person to guide you.
Not all boots are made to last. You buy a cheap pos and it falls apart in 6-8 months because of cheap/synthetic materials aren’t made to last as long as real leather and good construction.
@@bquick80 not “made to last”, he said “made to A last”. Its the foot shaped template, that the boot is constructed onto or around. Like a mold lol 😜
@@powers1776reset Oops!! lol but thanks for explaining what a last was like I was 2 years old. 🤣 I know what a last is.
Just wear em ....broke in my 1000 miles in about two weeks ..... wore them around the house and about .....fit like a glove now.....
Guys, I find one trick helpful to break leather boots and dress shoes in is to use a low heat hairdryer on the inside to warm them up before inserting my foot. This can speed up the breaking period. Thanks for the show from a Tennessee boy now in Oklahoma.
Hi, thanks for the videos. what do you think about Grenson boots?
I dont know how I missed this video. Working in a boot store in Texas Ive heard many old wives tales about breaking in boots, but Ive also seen so many guys buy work boots and come back the next day saying they hurt their feet cause they thought it was a good idea to wear brand new boots to the refinery or chemical plants, and when you try to explain the concept of breaking boots in its like youre speaking some alien language. Also before I worked at the boot store I wore size 10 1/2 or 11s found out Im a 9 1/2 or 9 crazy wide foot, didnt even know shoes came in different widths before.
Wow the editing and camera quality has markedly improved! 2 angles?
Nice tips. Would these also be applicable to Blake-welts? I thought those break in quicker
Great video and helpful info, and you all have awesome hair. Spoken from a jealous balding man. I love these collaborations topics, keep them coming!
When I broke in my Docs, I basically wrapped them in an old towel and beat them up a bit like you would with ballet shoes, lol. Then I wore them for a bit, took them off and beat them some more while they were warm. Worked pretty well. Probably not the kindest method, but Docs are basically indestructible :P
I just realized you guys should do a calibration with Bedo's leather works. That would be neat to see.
In one of your vids you said to condition/moisturize the leather in new shoes and boots before wearing. Does this also apply to Alden Indy Chromexel boots? Also what do you recommend to treat these boots. They are quite an investment which I would like to protect. I really enjoy your videos and find them very informative and entertaining. I'm surprised that guys send in boots and shoes for repair that are really filthy. You'd think they would knock some of the dirt/mud off them. Oh well. Again, love the vids.
Is there a tip for arch bite in one spot?
Great information. Thank you.
Nice video! What do you suggest for ink transfer from new leather boots?
With new boots I like to use the pencil trick! Press the pencil flat at the front to create intentional rolls so poor creasing doesn't happen.
I know you guys said this is not a good idea however, I'm a beer league hockey player. We are spoiled and we get new skates once every 2-3years and it sucks when the skates are brand new because they are not broken in and doesn't mold to your feet. What we do with our boots is a process called "baking" where you heat up your oven to 300 degrees, turn it off and put the skates in the oven for 5 minutes. After the 5 minutes, you take them out of the oven, you put them on your feet while seated and you lace your boots up to the top and leave out the top 2 eyelets. You do not flex your feet during this process and you don't pull the laces too tight because it will tear out the eyelets if you don't do it correctly. I haven't done the exact same thing to my Thursday Captains but I've done a version of that which is using a heat gun and put in inside the boot and turn it to 150 degrees and then put them on my feet. Of course, this only molds the boot to your feet and you'll still need to "break in" the leather but at least this way will help you soften up the leather so that you can have it molded to your feet. I would be careful doing this because if you don't do it correctly and use too much heat, it will destroy your boots. I would normally just wear it around the house for a few weeks and then you should be fine. Good vid!
Just got a email that they have received my redwing boots can't wait to see how they look when I get them back. Marco's new soul and clean up I have had them for 3 years hope to get 3 more out of them.
In a side note dose anyone suggestions on a new inserts any had good luck with?
I just got a leather cleaning & conditioning kit with Obenaufs and Smith's leather balm. I plan to use the Obenaufs to condition my Frank's boots when I get them, but wanted to know if the Smith's would work well for my Thursday Captains? They are made with Natural Chromexcel, and I don't want to darken the leather. Thanks!
You couldn’t miss the opportunity to show your new whites off 🤣 great colab guys!
😉
From my experience, to my feet a soft heel is more gentle to my feet than a rough one. Rough heels catch my sock and make the sock rub against the skin of my heel and cause blisters. What does help is to avoid cotton socks since they rub more against your skin when they are wet than wool socks. So I like to wear wool socks to increase comfort.
4Th. Love both of your channels. What model boot was in the video?
I agree about all of this, especially rotating boots. However, I recently discovered that with boots like Red Wing Heritage, I just massage the leather on the contact points, then wear them with thick socks for 3 days in a row while photographing weddings and events, (hours of standing) using cedar shoe trees every night. On the 4th day, the leather and cork insole is completely customized to my foot in a way that used to take months. Then I rotate them with my other boots to give them a rest. Appreciate you all.
The way we did it, or the way I was taught, in the army was to stand in the tub full of water and get them soaked and then wear them on a good ol’ long ruck march and wear them out good..always worked and broke my boots in perfect
I'm 59 yrs old and have done factory work my whole life and I don't sit in an office I'm on my feet ALL day My experience is wax your boots with a good boot wax conditioner and let them sit for about a week then wax again and wear them and rotate your work boots this for me has worked very well
Quick question, Can you condition you boots to much and is there a product you can use to spiffy the up between conditionings rather then saddle soap and polishing every time? New cowboy boot owner here ,got the ariat quick draws. Its was a great first boot probably getting Tacovas soon. Thanks Guys great channel i learned allot!
Just got a new pair of chukkas. Timely!
good collaboration with stridewise. behind the scenes b roll would have been awesome and even more entertaining.
Definitely agree! We were a bit pressed for time this week.
But how much can they be stretched? I recently got a pair of Thursday Vanguards. They finally had another production in indigo leather. Normally I wear a 10.5 EE, but Vanguards only come in an 11, so they're a little snug. Is it possible to stretch a shoe from a D to an EE - especially with thicker leather? Or is the width of an 11 D closer to the width of a 10.5 EE?
LOVE this video, BTW! Thanks for all the work you guys do!
Hi! I would like to know your opinion about the Jack Jones boots; I have a pair, and I bought some Saphir products to take care of them.
I would vary the boots that you buy. Boots like Bluntstones/ Redback boots are insanely easy to break in and what I wear as work boots. The boots outside of that you can go slow, wear thick socks, put bandages on your ankles. Condition the very back of a very structured boot to help it be able to relax around that back of your foot.
love like in the swiss army they get you nice measurement (true), and to that 2 potent pears of black army boots... then make wear them trough sweat, tear and pain until it fits... or your foot fits. But hey, the one i made fit me after the march... fits perfect!
My two favorite CZcams channels for boots and shoes did a collab?!
What what!
Trenton, you look so incredibly serious about breaking in boots :-)
😉😁
I think I already know the answer to this, but, I got a pair of Thursday Captain boots as a Christmas present but they were ordered with the wide option, yes I already wore them outside and noticed that they are indeed too wide for me. Is there any remedy for this, or any recommendations?
Also great video gentlemen!
I've been looking for tips on excessive ankle pressure/rubbing (the tongue on my Rough & Tough Thursdays ends right in the middle of the bony part of my inner ankle and it's causing pain on my right foot) and haven't actually found many people with similar problems, but doubling my socks down over that portion of my ankle is helping a lot. Wish I had gotten full cushion wool socks (the thick wool socks have been helping in general though).
The lighting, videography and video content is very professional. One of the best shoe content providers out there. Thanks for all of your hard work!
i own a pair of chippewas which i bought back in late 2016 i think. for literally several YEARS, the boots felt uncomfortable around the heel area every time i wore them, with blisters at the end of the day if i wasn't careful. as such, i never wore them more than maybe half a dozen times a year. this was a real bummer given that i had paid several hundred dollars for them. it wasn't until some time in 2020 when i gave my boots more frequent wear (once a weekish) that the leather FINALLY started molding more to my foot. now, they practically fit like a glove, and i don't need to worry much about blisters either.