Casting an Aluminum Bottle Opener from 3D Printed Patterns for the 2019 Openers Open
Vložit
- čas přidán 23. 05. 2019
- Time for the 2019 Openers Open! This is my entry. I printed some stuff, then cast it in aluminum. Enjoy. There's a twist at the end, though, and no, I don't mean twist off bottle caps. The opener I made is pretty standard, modeled in Fusion 360, but I tried printing multiple of them with runners in place, and casting multiple.
There are other people in this challenge, so search for "2019 openers open" or the hashtag #2019openersopen to find their videos.
this was the idea of SWDweeb, find his entry here: • #2019openersopen my op...
Here's the file I used to print the opener. Don't use it, though, it kinda sucks: www.myminifactory.com/object/...
Mailing Address:
1818 Milton Ave STE 100 #1973
Janesville, WI 53545-9998
We have a community Discord server. To join, click here: / discord
Follow me on twitter at / vloggarage
Instagram: / pauls.garage
Patreon: / paulsgarage
Music: "Quirky Dog" by Kevin MacLeod. incompetech.com
#metalcasting #2019openersopen - Jak na to + styl
Paul, you haven't failed. Through your channel I found swdweeb, through swdweeb today I found bunches more of awesome CZcams makers. Thanks to you both.
It's ok you get it next time keep up the good work and putting out videos. Thanks
Sooo Good. Even the fails are great. So human. Thanks Paul! keep up the awesome work. fair weather and following seas dude.
Thanks! Fails are part of the fun
Ting for the win... much respect!! 👊🏾
Well now that was interesting. Nice entry in SWDweeb collaboration.
Always fun watching your videos...
This challenge was really fun, looking forward to making the next one too(whatever it may be) :)
Thanks!
A long journey to a well earned drink even if it wasn’t a golden brew 🍻. Cheers Paul🍻👏🏻🤘🏻😆🤘🏻.
👙
Good job Paul
Metal shrinks a bit so you have to make your pattern slightly oversized. I am sure some work with a file will make the bottle openers work.
Probably, but I thought it was funnier this way lol
I agree, Paul. I prefer videos where you are making things and not talking. The lead up to it is good...the science/learning is good...but the actual execution is what I live for!
Hey Paul, love your videos and sense of humor, keep it up! Easy way to add draft in Fusion (in this case) is to do a tapered extrusion of the outer profile of the object. That'll let you input an angle. Then split the model with a splitting plane down the center for your print halves.
Lol good video! I liked your idea of tilting the four patterns, I’m going to have to try printing with gates attached soon, I’ve seen Perry do it too, the result looks very neat and accurate, great finish too. Cheers
Ok, I don’t think you’re going to win the best opener award. But, more importantly you’ll get funniest every time!
So cool! Very entertaining! Better luck next time! 🤣🤣
Thanks for the video Paul. Memorial day is a little more than a BBQ though.
Very true, in fact swdweeb has a video from a year ago on the history. I may have undersold the significance of the day...
Getting good at the casting.
Thanks!
Aswome Paul!
Awesome job your a funny guy! Ginger Power thanks for participating
Gingers ftw
Lol. Good one Paul. That's the way it always goes right.
The bottle got opened that's all that counts haha
@@PaulsGarage exactly
wonder if you get better flow intoo the parts if you slant or curve the feedchannels toward the fill-sprue , kinda catch the material while its flowing by through the main channel
(the parts did fill up completely so the small holes you made with the welding rod are probably enough )
as for the bottle opener itself , might need to make the angle of the bottom hook a little more steep so it doesnt slip off the edge of the bottlecap
we had a guy at work who allways opened his beer with a foldable carpenters ruler , he lined it up beneath the cab holdinmg it with the same hand holding the bottle and banged the other end of the ruler , one day we spend about 2 hours shaking the bottle before putting it back on the table bout 5 minutes before he came in , lets say he got wet and didnt enjoyed a lot of his beer by drinking it , we enjoyed it inmensly though
Hahaha that's awesome!
Nice one..
Great job with the set of 4 openers, they look so nice... nice you had to use the 3D print... good job trying the drink.
lol, I had the same issue, all my bottles have twist tops.
dollar store riddles are better than kitchen riddles.
You need to print a pouring basin the smoother the pouring basin the better it works for some reason
Lol. That was awesome. Thanks..
Thanks for watching!
8:15 this is why calluses are best had at the tip of your fingers, not in your palms, to you can play guitar good, while still being capable to mustering excruciating pain that prevents you from gaining said flaps of skins when opening a bottle.
Ow ow ow ow!!
Since you mention guitar, I have callouses on my fingers from violin, but they arent tough enough for guitar. Less pressure needed to hold down the strings without frets
@@PaulsGarage have you tried the cello? It requires more pressure, is similar, and easier to play, and in my opinion a lot prettier.
Also more expensive XD
Paul, I have been worried about them twist tops, that's why my entry has a twist end to it too
great video thanks
Thanks!
Actually the way to reduce turbulence is to slow the metal into the mold. If you make your gates larger (cumulative) than the runner then you can move more metal into the mold at a slower rate.
Ok, I laughed out loud, no really I did when you opened it with the print, I guess it should be expected after your bead roller experiments. :-D They looked good, really good, except for that little...small... tiny... design issue :-D
The important part is the bottle was opened by something that I made and I'm not going to dwell on exactly what I made and how that happened hahaha!
@@PaulsGarage I would have thought that the important part was that you didn't spew after drinking that stuff :-D
Tune in next time where paul is sick from a almost 20 year old bottle of soda.
Haha hopefully I won't die
4 at once? Are you planning on going into production? Well I guess they all did cast and you did get the bottle open, but does no one actually drink beer?..Martin
If I'm going to fail, might as well fail 4 times at once! Saves time that way. Pretty happy with how the castings turned out, the makers mark stamp too. Pretty happy with the casting overall, just not my engineering haha
Good show, old boy. lol it's how we learn.
Exactly, its not a total failure and waste of an afternoon, it was a "learning experience" haha
@@PaulsGarage IT'S the part of life that makes it worth it, learning is fun.
They could be a bicycle quick release with a tad of machining.
I would like one of those bottle openers because I drink a lot of soda
i drank a pepsi last summer from 1998 lol, still tasted fresh!!
I wonder how much preservative they use. All of it?
Seeing Gingery lathe bits on the table, wondering if you care about it anymore. I sure do.
Chug chug chug
If you have decades old cement there may be to little water in it for a steam explosion
Definitely not a fail, mine however is
You have a weird brain like me. So I have a question: during an earthquake, do coffins become underground maracas?
Bwahahaha!!! Mental image
Lol. I'll call that a success
it was still a nice try at least they looked good
17 years old soda? You could probably get drunk off it.
I know which 3D file I won't be using to make a bottle opener, if I were to ever actually do such a thing. Oh well, at least we had fun.
I didn't drink much of it, that's for sure!
You are funny !And you should make comedy Movies :),Regards Form Europe !
cast a cannon that fires a small buckshot
Make something while you do the Q&A. Both issues solved. Wife and my ten year Anniversary so no idea what I'm doing as we are broke so maybe I'll sit in on the Livestream.
Good idea!
And congrats on the anniversary!
Aw. At least they're easy to recycle.
All my favorite 'Tubers are casting Bottle Openers. Weird.
Biggest coincidence in history
I should realy pay more attention to how you make the gating an the surge trap and feeder, my fisrt attempt failed and now my upload is gonna be late 😭
My video is uploading now and taking forever 😠😠😠
See you on the next one 👋👋
Most of what I do is copied poorly from olfoundryman and swdweeb and a few other much better metal casters.
@@PaulsGarage and I copy from you and many others 😋👍
Warning: Not for the squeamish.
Your hot tub story was--OUCH.
I had similar happen after climbing across money bars at a playground once in my teens. Had callouses on my hands that came RIGHT off. Not fun. Stung like hell.
That sounds painful!
Grapefruit drink? WTF man?
Jamaican grapefruit, that makes it fancy
@@PaulsGarage I'm revoking your MAN CARD.
I already gave it to my wife for safe keeping hahaha
@@PaulsGarage That's sad.
LOL
I take it you watched to the end? :D
@@PaulsGarage Yes - loved how the 3d printed openers came through for you
That one worked perfectly
Casting any crap lately? ;0D
Bro. Wtf.
Lolz
Bet you didn't see that coming
@@PaulsGarage no. I didn't. 🤣