Making a Branding Iron
Vložit
- čas přidán 26. 08. 2021
- This is a CNC-made branding Iron, was thinking to make one to brand my woodworkings.
T-Bevel square: amzn.to/3azunrK
Mini square: amzn.to/3BGTnJu
Marking knife: amzn.to/3FGfZw9
Japanese clamps: amzn.to/3lAVI32
Japanese saw: amzn.to/3oYjhF7
Ripping Sawblade: amzn.to/3BCNZXZ
Multipurpose Sawblade: amzn.to/3FLp6vu
Clamps: amzn.to/3BFLWSO
My Wood threading jig: amzn.to/2X5XCzg
My Main chisel set: amzn.to/3FFGvpv
Sharpening stone: amzn.to/3aO2Djv
My video recording gear:
Main lens: amzn.to/3FKO4eL
Tripod: https: amzn.to/3DGRtcH
#cnc
#branding
#woodworking - Jak na to + styl
Nice Job. Any chance you could relay type of brass, Bits, speeds and feeds you used to do your branding iron? I would greatly appreciate it. Again nice job. Thanks
Great job on that branding iron, Rasim!!!!!!!!!..............Cheers, Jim
Thank you Jim, your first comment on my channel out of Lumber Jocks !!appreciate it 🤝👍
@@TheWoodCrafter1 Hi Rasim. i love your work. you are so creative and have some very nice machines to make your projects on!!!!!!! Cheers, Jim
@@jimjakosh2506 thx Jim, I guess I am lucky on the tools part, for skills and creativity the road is miles ahead. I appreciate your time and sweet comment 🤝
I was hoping to see the CAM...
👍👍👍
I really need one. Can you make it me?
This is exactly what i'm looking for.. But i need some help with the process before the carving section.. Which program and settings you used for designing and carving?
Thanks in advance..
My best..
Thank you, I am using Fusion 360, CAD and CAM, I can’t help you with the settings as every machine is different, my advice is to use very slow feed rate and no more than 0.2 mm for finishing details. Good luck 👍
@@TheWoodCrafter1 Thank you for the quick answer. This is a good starting point for me ;) Thanks again..
About 1/16th inch for minimum surface trace/line thickness?
Maybe if use electric heater for heating that will better. This is great 👍🏻👍🏻👍🏻👍🏻👍🏻
Yes that is right 👍 thank you
How will you know what is the right side up when branding your projects
I made a tiny scratch on the back of the branding Iron. but that was done later.
@@TheWoodCrafter1 thank you for clearing that for me sir.
I love all the videos that i have watched this far. And i'm sure to continue for quite some time to come. Thank you🙏
@@nevillesmith9795 🙏🤝
What are your feeds and speeds?
I go 14k spindle revolutions and for feed I go very very slow, that also depends on the machine you have, the depth of cut for small bits is no more than 0.007 inch 🤔
But that is my machine yours might be different
@@TheWoodCrafter1 Thank you so much! I have a ShopBot.
Инструменты покажи лучше
Can u make me one
There are many companies that are specialized in making these with very affordable prices, Google branding irons and you should find them! I am sorry I don’t make such commercially.
@@TheWoodCrafter1 thanks you I will google about I appreciate any way u did I Great job
Sir aapka number