First DRIVE with Holley EFI Sniper on my 1968 Camaro
Vložit
- čas přidán 24. 01. 2023
- First Drive with Holley EFI Sniper on my 1968 Camaro 502 big block
#holleyefi
Holley EFI Sniper Install video
• Converting CARBURETOR ...
Holley EFI Sniper Kit First START Video
• First START with Holle...
***GET YOUR MERCH***
teespring.com/stores/jd-joyri...
JUST SEND IT (For anyone that wants to send us stuff)
PO BOX 157
Middletown VA 22645
Keep up with me between uploads on my social media…
IG: @jd_joyridetv
FB: JD Joyride TV
#TeamLaura
IG: jd_joyridetv_wife
BIG THANKS!!!!
BOOSTane
save 10% use code: jdjoyride10
BMR SUSPENSION
Save 7% Use Code: JOYRIDE7
Holley Performance
EZ Air Ride
Laid Not Sprayed
PowerStop Brakes
AUXBEAM
XForce - Auta a dopravní prostředky
I’m a Ford guy but this rocks! Don’t forget you have family to take care of 😅 Much appreciated!
There is no better sound than old school muscle! It was awesome to see some car content again!
I got that holly setup on a 396 and ooooo boy 👍🏿💪🏿💪🏿💪🏿💪🏿
I've had my 68 Camaro 396 for almost 30 years still puts a smile on my face you got me thinking about the Holley kit after watching this, great video keep them coming
Same for my 67, I have a Street Demon on it now, I love it but it has its issues, I think I’ll give fuel injection a go.
I'm interested in fuel injection for mine. My only concern is reliability. I don't want it to fail while I'm miles from home. I can still fix my Holley in the ditch, but not EFI if I don't have a fortune in spare parts with me..
So happy to see this car running like it should. Can’t wait for warmer weather to see more of it!
Stretch those springs a little bit by hand and it will loosen up your gas pedal and won’t be as stiff. You always wanna run two springs though just incase one breaks, it will stick it wide open.
Think I'll try the spring stretching tip on my Nova that you mentioned. Got 2 springs on mine as well but it seems kind of jumpy when I first take off since the pedal requires extra effort.
I had a spring break on my '69 big block Camaro as I was giving my neighbor a ride. Thank God we were on a country road instead of in a populated area. I had to powershift into 2nd gear before I could reach my foot under the pedal to unstick it. It was a scary ride. Always double your return springs!
My 67 Camaro RS/Ss is sitting in the garage, I live in Southern Ontario and we’re surrounded by snow, this video makes me want to drive it so bad. Beautiful car by the way, mine is Sierra Fawn, LA car, 4 spd, I can’t wait till spring.
Finally sounding proper, congrats man!
Holley sells a throttle extension for the holley efi, it supposedly makes the throttle not so snappy off of a launch
Hello guys from down under🙃
Sounds sweet and pulls hard, very very nice from Australia 😎
Awesome the 68 Camaro is my favorite car out of all of them glad to see its going well
Sick, cant wait to get my 67 camaro going
Cool upgrade! Love the throttle response!
I ran a steel gear on a steel mechanical roller cam for 5000 miles! Mostly street and some strip use….very little if any wear …maybe polished where the gears were meshed! I didn’t want to constantly check a bronze gear for wear!
If you don't like how touchy the pedal is, look into a progressive throttle linkage for the sniper. It's a small piece that you insert near the throttle cable that opens the first two butterflies of the carb first and then the back ones as you give it more throttle.
EDIT: Following up on this and leaving a comment for others to see. I'm working on getting a tune for my Holley Sniper and mentioned the progressive linkage to the tuner. They sent me back a long write up about how they don't recommend the progressive linkage, as it results in the loss of low end power. Holley has put out a throttle extension that makes driveability better without sacrificing low end performance. Sniper Throttle Extension, PN 20-16
Don’t over complicate it. Stretch the springs a little by hand and it won’t be as stiff or “touchy”
was just about to comment and say NOOOO don't do progressive lol.. get the extension, then i saw the edit.
That's so awesome, glad to see the Camaro brought up to more modern times and that it was such a worthwhile upgrade. Excited to see the new dyno numbers on it
She should make some good power…I hope
@@JD_JoyrideTV will deff be an improvement that's for sure
It shits and gets now damn !!!! Not only you can tell it goes a lot better now judging by that one car on the highway must have been going at least 70 and you was pulling way ahead on it when he was getting on it real quick !! Would love to ride in one day..lol awesome job guys 💯🤙
Yeah that was the interstate with the speed limit of 70mph and you know everyone is doing a little over and we were moving from that dig
Dang be difference.. great seeing car content again, know upgrade the brakes.. Very cool Camaro, please keep it for a long time
You guys SOLD me, going to get that setup and put it in my 72 Skylark you see in the pic to the left!
Need to change out that little bar on the TBI that opens up the secondary, it’ll make it allot more street friendly. Less touchy.
That is one nice ride !
The white letter tires look fantastic.
Glad to see the Camaro up and running again can't wait to see the dino on it run side by side with the mustang see which ones got it
Love it !!! I got one for my '81 Camaro.
Man it sounds damn good 💪🏾💪🏾
Sounds good! What was all needed for the holley efi installation?
That thing sounds 💪
Wow, JD! The Holley kit brought that 502 to life! Huge difference... sounds so healthy now. My favorite pull was around 9:44 or so.👌 Dude, you were grinnin' the whole time so I know you're excited to finally have that beast running like it should. Damn good show... reminds me of the old Joyride videos. Y'all have a good evening, bud.👍
Always fun getting back into the car making some old fashion joyride style vlogs
The car is really badass. Needs wheelie bars. The old school ones. The bottom section is flat like a leaf spring, and the upper is tubular with about a 6 inch spring section at the wheel end. Very cool.
Theres nothing like the sound the sound of a Rat motor! BA Camaro! I have a modded 95 Z28 with a LT1!💪🏾💪🏾💪🏾💪🏾
get the throttle extension to fix the stiff throttle. may wanna toss an extra wind on the secondary while you're at it. they'll start sticking later and holding idle high.
You have my dream car!!! Keep making it a monster!!!
My dream car too!
Sweet ride light them up
dang thing sounds sick now
No better feeling when your ride runs they way it should. Now onto making it stop as well as it goes.
We definitely need to make it stop better.
Now your making me think about it … damn… very nice !
Do it! Just do it
JUST DO IT BRO!!! NO LOOKING BACK..
What did you use as your initial timing settings? I have a 69 Camaro with a 502 that I’m getting ready to put a Holley sniper and hyper spark in. Trying to figure out what to use as the initial, wot, and cruise timing to start off with? GMs recommendations for timing for the 502 seem tame.
You could have got the carb tuned correctly and saved a pile of money! I have dual Holley 650's on my 427 Windsor and it runs fine.
Your right I could have got it tuned but with the Holley EFI it’s self tuning and learning all the time at different temperatures, rpm’s and speeds. A tuner would have it running perfectly for that day then we get a cold day or I take the car on a trip to the beach with different elevations the car won’t run the same but the Holley is always learning and self tuning.
She is awake!
Damn, the last year or so I've finally begun to think I should switch over....then I find THIS video....Sold !
Now I just have to come up with the money .....
Now that's what I'm talking bout in. Eric o's words chevy thunder
automatic transmission? or manual?
I’m not running my inner return spring on my sniper, only the outer, it has a substantial return spring of it’s own
Hello, Question: On the 1968 CAMARO the pulse width at idle is running about 2.56ms, have you noticed what the pulse width goes to when you open up the throttle?? maybe a Max Min value??
Sweet car
Wow what a difference and it sounds alot better. Can't wait till you get it on the Dino machine. Keep up the great work brother. Peace ✌️ out.
From what I've seen on Dyno runs that sniper may be good for cruising around the street going and grabbing groceries but look at the size of your tires tucked under that Camaro you got yourself a drag car you need a big 1050 dominator carb on that thing
I want to put one on my c10 I wish they wasn't so expensive
Sounds awesome. My son wants to go this route with his 68 also. He was given a 68 to him from his uncle for his 16th birthday. Car hasn't been driven in 10 years it's his second year having it still working the bugs out. We aren't too far from you would love to see the car and some insight on the install.
Anytime I’d love to help
@JD JoyrideTV we aren't too far from you. We are in midland va. I've seen you around manassas also when you were heading to Chris shop. I've know Chris for a bit he did work on my son's mustang. He also gave me a baseline on my 16 ss.
anyone know if he still owns the eclipse?
I've been on a few butthole pucker rides myself! Lmao!
Night and day difference now bro...that car is running good ! Holley is the best !!!
No doubt
4-wheel disc brakes is the only way to go with these late model Camaros
How do you like it now a year+++ later?
Nice Camaro
Full throttle on that thing gives me adrenaline and I'm not even sitting in it
She’s mean.
What motor u got in it?
Holy cow....more like Holley Cow!
Much agreed lol
Hahaha yeah that sums it up.
Sounds good! You gonna run it? I've got a 74 GTO that would make for an interesting race.
Hyd roller cams needs a bronze gear. Maybe a cam swap an new valve springs will help alil more
@Tap_profile453 Scam
Hey JD what company makes the 1:64 scale orange camaro with white strips from the last toy town video
I had that one custom made to match mine
@@JD_JoyrideTV o okay thanks
What happened to the c/10 that you had did you give up on it ?
NOOO! I’m going to get back to it hopefully here soon.
I would put some street wheels on in or more street friendly modern wheel like a 17or 18 on the back with a fat et street ss or something like that with a 19 or 20 on the front
I’m not a fan of that big ass wheel on the back way to many like that and ur not gonna make that kind of power for them
That would be gay as fuk it’s not a Honda
Power steering, power brakes and A/C ? Do you want a daily driver or drag car?
I want the best of both worlds
Put some 28” tall tires on that car lol
They didn't send me tee-shirts with my Snipper kit.
This what you call smiles per gallon
Ur supposed to wait for the pump and efi to squirt “prime” takes like 4 seconds
Change those bronze gear every year for safety purposes.
Only a 502? I really figured you for an all out 572 guy.
Do more of the diorama please
I will we got more to add to it
That thing sounds MEAN
@Tap_profile453 Scammer
I think it's safe to say the Camaro is now more gooder.
YES! 😂
Does it have a stall convertor in it??
You can’t tell it does from the high gear hits they’re making??
@@Horsepower_Stables more curious of the stall speed
Great video!! Any video is instantly better when someone says," it made my butthole pucker". Yes haw!!!
I'm back team laura
Jd joyride tv
CZcams,video,
Love video,
Luxury, car, Super fast cars, trucks,
Newbrunswick Canada 🇨🇦
@Tap_profile453 Scammer
Nicest vehicle on the channel!
How you riding around with a burnt out headlight lol.
Lol, I know
I'm finally the first to comment lol
Passenger side headlights out.
Well, Snipers are neet....but If you buy a good carb, AND pay for properly tuning it equals out....
From experience, I suggest to Not sell you carb stuff right away...keep it for a minimum of 3 years...in my experience, 3-5 years is the average Sniper life span
Lap belts only ?
Nice 68 -----------YEAH_______Nothing like a Big Block ----where's all the Imports---LMAO-
For you purist and old timers out there, just do it!!! Why f*ck with carbs and non starting choke situations..Here you have the reliability of a modern day car that you don't have to f*ck with...I caught hell with my Oldsmobile club because I did this conversion on my 1970 olds-442-w-30 conv with original 60k miles..Not only that to piss them off even more, I LS swapped it with a brand new GOLEN built engine producing 600-HP!!!So the way i see it, we buy these car's to drive, not to look at....MAGA!!!!
@Tap_profile453 Scam
Spending all the money on the motor think you could afford a headlight lol
Lol😂
That Brown's ear b******* is b******* I've had every type of Cam there it is oh the years you're going to stop the
67 are better
66 Camaro is more rare
65 1/2 is the more rarerest
@@JD_JoyrideTV More rare is more gooder
What's wrong with you
So lemme guess your a "New" car guy and didn't know about cam gears with distributer drive gears .. Motorheads don't even talk like you bro ..
Nice!😎👍🏻. I have a Pro Street 67 Camaro! 👍🏻
@Tap_profile453 Sounds like a scam to me so no
Damn nice Camaro. She sounds mean, I'm jealous to say the least.
But will it do a burnout? LOL Awesome video!
Well find out one day
Yes it will
You young wipper snappers can't handle analog things ah? So you go digital 🤔...shameful....
Are you gonna take the camaro to mustang week
Hmmm, I really have thought about taking it.
@@JD_JoyrideTV i believe people at mustang week would appreciate any muscle car
#horticulturistlaura