Unifi Access Onsite Installation : Intercoms, G2 reader pros, Intercom viewers

Sdílet
Vložit

Komentáře • 85

  • @terryjohnson3100
    @terryjohnson3100 Před měsícem +77

    Very nice! I'll even give you a pass for the (A)ncient standard vs. the (B)etter one.

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +5

      😂

    • @AldenPatton
      @AldenPatton Před měsícem +5

      B allows for faster throughput in certain instances.

    • @bmsfx
      @bmsfx Před měsícem +3

      B is the better one, confused me a bit there, all the tests confirm this :P, was just about to flame when i saw someone did a (N)ice post about it lol

    • @bckpcz
      @bckpcz Před měsícem +1

      And becouse Cody is so old, he use the Ancient one :-) he is practicaly Anqueetas 😀

    • @7ekken
      @7ekken Před 29 dny

      @@bckpcz Canadian water hits a little differently than other places in the world. Also, on a legit note, orange and brown are naturally opposite each other when the sheathing is removed making for an easier alignment.

  • @gurban333
    @gurban333 Před měsícem +34

    dont silicone under the outside intercomes. water needs a place to drain if it does get behind.

    • @Chris_In_Texas
      @Chris_In_Texas Před měsícem +5

      I was going to say the same thing. Always allow water a way out. That is why on the "waterproof" boxes you need to drill a small hole on the bottom as well to drain any water and or dew that will ALWAYS find a way in over time. 🤠👍

  • @webluke
    @webluke Před měsícem +5

    It's super cool how far Access has come since I got to work with the beta version a few years ago. The new Hubs are what we needed, but they were dead set on having DIN rail-mounted hubs and didn't understand having all the cables come back to a central location at the time.

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +2

      The enterprise hubs are amazing! I remember the first starter kit it was good but now Unifi access is great

  • @gferriott
    @gferriott Před měsícem +7

    Dude you're killing it. This looks like a really interesting install. Good job to you and your helper

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +1

      Thank you :) that’s my brother Jay he’s going to make a CZcams channel as well going deeper into the physical install

  • @NeilHyndman
    @NeilHyndman Před měsícem +2

    I'm not sure what I find more interesting? The video itself or the comments below. You can tell who below has been doing these types of jobs for a while, verses those who haven't. I must say, I have never seen a KeyScan (dormakaba / Keyscan Aurora) being removed - they are rock solid systems and are at the top of every category you put them up against. I like to see dormakaba and ALGO products installed - these are two great Canadian companies and employ Canadians here at home. Amazing video as always though!

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +2

      The customer is very heavily invested in the Ubiquiti ecosystem and the keys can system works well but was about 15 years old

  • @keylessentry2022
    @keylessentry2022 Před dnem

    Nicely done. Great install behind the scenes video.

  • @SelfMadeThousandaire
    @SelfMadeThousandaire Před měsícem +1

    Great install, looking forward to the more in-depth videos.

  • @DPCTechnology
    @DPCTechnology Před měsícem +10

    Clean install. Great stuff as always!

  • @UKCG_2
    @UKCG_2 Před měsícem +1

    What a coincidence! I have an old Keyscan system (covering a single door) at the school I support and was thinking about how nice it would be to swap it out and expand the system (covering five doors) using Ubiquiti Protect running on a Cloudkey+. I look forward to the video covering installing the door strike mechanisms, particularly in metal doors!

  • @artofnoise5013
    @artofnoise5013 Před měsícem

    Nice, clean install!

  • @PLeeA99
    @PLeeA99 Před měsícem +14

    When you say T568A is the 'best standard', why do you say that? Genuinely curious. Been using T568B for decades as 'standard' and it's mostly what I see in the field. Curious to know your thoughts as to why A is better. Thanks much!

    • @salemas5
      @salemas5 Před měsícem +12

      tbh B is default across the world

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +23

      That was more of a joke I knew it would cause people to comment lol. Ive always used T568A as that is how my grandfather taught me. It becomes a heated debate thats for sure. The only thing to remember is to use a standard and not make up your own code

    • @justindeweger
      @justindeweger Před měsícem

      Haha

    • @fantommoe
      @fantommoe Před měsícem +1

      @@MactelecomNetworks And this is why I have trust issues. 😄

    • @DozIT
      @DozIT Před měsícem

      @@MactelecomNetworks Lol, I have no reasoning for it but I use B exclusively! Funny how that works

  • @CameronMagee
    @CameronMagee Před měsícem

    Thanks for sharing! Love it.

  • @Lewis4568
    @Lewis4568 Před měsícem

    This is what I’ve been waiting forrrrrrr,
    I hope with them screens we can see the cctv cameras on 🤞🤞

  • @ronm6585
    @ronm6585 Před měsícem +1

    Nice! Thanks.

  • @Rudiks93
    @Rudiks93 Před měsícem

    Great video!

  • @4ngarag
    @4ngarag Před měsícem

    Clean! Awesome

  • @jfkastner
    @jfkastner Před měsícem

    Nice, very interesting!

  • @splinxes
    @splinxes Před měsícem

    Hell Yeah! Awesome install. Would be great if you can do an in depth config of access.

  • @alinconstantingoga
    @alinconstantingoga Před měsícem

    Nice one . What kind of sticks are you using for drywall?

  • @backstage101
    @backstage101 Před měsícem +2

    Can the intercom call regular SIP,POTS, or cellphones???

  • @richardturkson5916
    @richardturkson5916 Před měsícem

    Great job. I have a customer that has that useless Keyscan product installed. I will like rip it out an go all Unifi Access product. One day, when they are ready to move forward.

  • @themannamedjames8766
    @themannamedjames8766 Před měsícem

    What is used to unlock the door from the readers? Is there a Unifi door lock or a different system?

  • @greglopez8206
    @greglopez8206 Před měsícem +1

    The standard (B) Best part of this video was that song! “Just a Little Bit” by Chris Shards and Gloria Tells Incase anyone was wondering.

  • @LEGOmania-TV
    @LEGOmania-TV Před měsícem

    Great Work!! Looks awesome !!
    Anyone know of fingerprint usage on the g4 doorbell pro ??

  • @michaelgrimmer1926
    @michaelgrimmer1926 Před měsícem

    Hey, Did anyone see what device was being used for REX? I like the new access enterprise, but it only has enough ethernet ports for one IP reader per door. Im currently using a G2Pro for the entry, and a G2 in hand wave mode for exit. Thanks!

  • @icopiki1
    @icopiki1 Před měsícem

    Hey love the videos, can you make one about how does an automated door opener work with the hub. ❤

  • @GrahamWerle
    @GrahamWerle Před měsícem

    Awesome install, was the cat cable already in the door frames?

  • @kelemvor3333
    @kelemvor3333 Před měsícem

    Does that Sun Shield really do anything? Looked like it only stuck out an inch or so.

  • @JabbaDuhNutt
    @JabbaDuhNutt Před měsícem

    What locks would you use in a Home install? Front door, back door situation?

  • @held_der_welt
    @held_der_welt Před 3 dny

    Hi. Is there any possibility to get rid of the directory button and show 2 names direct at front screen to tap on and call?

  • @Eric-xw9sj
    @Eric-xw9sj Před měsícem

    Hi!! Having problems adopting new thetas pro. Tried different hubs. It says ready to adopt I click adopt and then it says ready to adopt again. It is vicious cycle.
    My storage capacity seems to be close to Max could that be the issue.
    If not, any suggestions? UniFi forum is useless.

  • @0marr2
    @0marr2 Před 19 dny

    There’s a few access control systems we’re looking into and this one seems to be a top contender for us.
    Question - Each hub is able to control 8 doors. Are you able to link 2 hubs to a single account and have control to 16 doors? If I create a user, can they open any of the 16 doors with a single fob or card? Can’t seem to find a firm answer on this. Thanks in advance.

  • @Adam-s8d
    @Adam-s8d Před dnem

    Hi Cody can the intercom viewer work with the g4 doorbell pro??

  • @XxstuntkidXx
    @XxstuntkidXx Před 27 dny +1

    Was it painful to run the Ethernet cables ?

  • @evil_mel6430
    @evil_mel6430 Před měsícem

    Does Cat 6 have the plastic spline divider in the middle of the twisted pairs like Cat 6a?

    • @Brandon1994youtub
      @Brandon1994youtub Před měsícem +2

      Typically, yes unless you’re dealing with very cheap cat 6 wire.

  • @michaelcrossman2749
    @michaelcrossman2749 Před měsícem

    I know the specs for those door reader cameras states a 123° vertical viewing angle, but at the height they are mounted, how is the view?

  • @shammakenpatchi
    @shammakenpatchi Před 26 dny

    Hey, a quick question if anyone can answer it for me...Can I use 3rd party wired smart door locks with ubiquity's door access hub/reader setup? In theory, any smart door lock that requires 12-24Vs to operate should work with ubiquiti's access hub right?
    I'm asking because after researching a bit, I found only their electric strike and magnetic door locks to be reviewed with their door access accessories !

  • @CHarryAK47
    @CHarryAK47 Před měsícem

    Correct me if I’m wrong but your not supposed to use PVC indoors it has to be EMT or Rigid pipe otherwise looks awesome!

  • @kurlis
    @kurlis Před měsícem

    Can you do a video on the U7 Pro Max, like why they didn't put a 10 GbE RJ45 port and MIMO 8x8 on all bands, thanks

    • @JabbaDuhNutt
      @JabbaDuhNutt Před měsícem +1

      Because that would be the only upsell left for the U7 Enterprise. I went with the Pro Max as I wanted the dedicated radio for monitoring. the 4x4 wont do much TBH.

  • @chrisrjrose
    @chrisrjrose Před měsícem

    I am unable to find some of this equipment in Canada. Does your supplier have it?

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem

      My client bought all this gear. You can try through tDL Canada or deploy depot

  • @shunorrr
    @shunorrr Před měsícem

    no setup?

  • @adnan.alagic
    @adnan.alagic Před měsícem

    Hello Cody. I have one question please: Can you pair unifi Intercom viewer with a G4 Doorbell Pro ?

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +1

      Nope not yet

    • @adnan.alagic
      @adnan.alagic Před měsícem

      ​@MactelecomNetworks how unfortunate. In my opinion, that's a perfect combination for a single home. Do you have any other ideas on how to achieve the same thing with a g4 doorbell ?

  • @chazprouk
    @chazprouk Před 14 dny

    Has anyone fitted unifi access to a roller shutter door?

  • @narnol02
    @narnol02 Před měsícem +1

    Is this business hockey related, or why do they have all the hockey sweaters and sticks. You are in Canada though so makes sense.
    Also why in your opinion is A the better standard?¿

    • @MactelecomNetworks
      @MactelecomNetworks  Před měsícem +1

      Nope the business has nothing to do with hockey 😂 the owner just loves it

    • @narnol02
      @narnol02 Před měsícem

      @@MactelecomNetworks do you prefer the A standard cause your Canadian A.

  • @axel.fyoutubeb
    @axel.fyoutubeb Před měsícem

    T-568A...you monster 😂

  • @Pr0b
    @Pr0b Před měsícem

    '..becasue T568A is the best standard'
    This man woke up that morning and chose violence. 😀
    lol looking at comments so many missed COdy's joke

  • @joejoe6949
    @joejoe6949 Před měsícem

    You should have gotten a holes saw and made two holes one in the top and another on the bottom the Dremel the sides. Lot quicker.

  • @MichaelTavares
    @MichaelTavares Před měsícem

    Did this guy just say A was the best standard?!?

  • @MitchellEarl
    @MitchellEarl Před měsícem

    "Terminating in T568A because that is the best standard." I know that was for all your American follower. 😂

  • @ryderholland
    @ryderholland Před měsícem

    2:56 you lost me at using A standard

  • @JB007Rules2
    @JB007Rules2 Před měsícem

    568A *twitch*.... *violent twitch*

  • @jamesbryan4976
    @jamesbryan4976 Před měsícem +1

    'A' don't pay

  • @MatthewZank
    @MatthewZank Před měsícem

    LOL @ T568A

  • @LoopsFroott
    @LoopsFroott Před měsícem

    A standard? Hell nah.