Great video Tony. I have only recently come across your channel. I am considering getting a heater like yours. Have you had any problems with the heater since making this video. Keep them videos coming.👏👍
Hi Tony Wayne again about the heat pump was it easy to wire up is it a plug and start pump did you put a normal plug on it and start did you use a rcd on it thanks again
I ran a 16 amp exstention lead from a socket direct from a rcd at my external garden supply which is a armoured cable from main fuse board, cut the 2 pin plug off and fitted a 16 amp waterproof commando plug, although there is no problem with the exstention lead, it is a temp to get up and running.😀
Hi Tony see your video was good just wandering how many gallons have you got cause I was considering getting the same heater so I was wandering how many gallons you have to see if it would be okay for my pond thanks
Hi Tony it's Wayne just a quick question I've bought a heat pump like your one and it's about setting the temperature I've set it for 18 degrees temperature went down to 17.5 when should the heat pump switch back on again it's on heating mode like I was told to do should the heat pump come on again when I drops below 18 thought you would no cause it's the same as your s thanks tony
Hi, the default temp drop setting for restart is 2 degree c, so it would have to drop 2c to start up again, I have reset my temp drop to 1c, which means it will come on more, but work less hard to get back up to set temp, and less temp fluctuation, manual says how to change from default, much as you set target temp, hope this helps.
Haven't got my instructions at moment trying to find it could you help me buy telling me how to change it to 1 c if you don't mind tony so it gives me time to find the book hopefully it will be easy for me to follow your instructions thanks again
Stunning Tony that will help a lot for the koi a brilliant set up many thanks for the shout out and thanks in advance for next Tuesday 👍👍🚀🚀❤️❤️
Looking foreward to Tuesday Dave, as well as getting your pond in place, it will be a fun day😀
Well done Tony that will make a difference 👍🏼👍🏼
All looking good take care
Great update Tony
Thank you😀
well done Tony
Awsome Tony not jealous at all
Looking good Tony 👍 can't wait to get my air source up and running now 👍😊
Look forward to see that Jamie😀
Hi Tony,
A other great update on the things that you are doing around the pond and the project that you have been doing mate.
Steve
Thank you Stephen😀
Nice video Tony 👍
Hi Tony it was great to meet you at Dave’s on Tuesday. Hope to see you again soon 👍
Same here!
Looking good Tony 👍🏻
Thanks 👍
That ashp looks the business mate 👌🏼👍🏼
cheers
Nice update
Looking forward with your results with heating the pond 😎👌🎏🎏🎏
got from 9c to 15c in two days, now maintaining 15c
@@FARMOORKOI uff that is awesome 🤩
Bravo 👏 for you and you’re koi’s 😎🎏🎏
Hi Anthony what litre is the pond
@@THAT-KOI-GUY Hi, 22,000 litres, just short of 5,000 gallons.
@@FARMOORKOI where did you get that heat pump ? How are you finding it
That's a very nice shiney heat pump! Wicked addition. 26c incoming? 😂
Just lifting the temp slowly😀
Great video Tony. I have only recently come across your channel. I am considering getting a heater like yours. Have you had any problems with the heater since making this video. Keep them videos coming.👏👍
Hi Gary, Thank you, no, had no problems with it at all, seems a nice bit of kit to me😀
Nice video Tony 👍
Welcome to the world of using an ASHP.
Do you not need a bypass on it though?
Hope you're well.
The feed goes to two further places, so in affect acts as a bypass😀
Hi Tony Wayne again about the heat pump was it easy to wire up is it a plug and start pump did you put a normal plug on it and start did you use a rcd on it thanks again
I ran a 16 amp exstention lead from a socket direct from a rcd at my external garden supply which is a armoured cable from main fuse board, cut the 2 pin plug off and fitted a 16 amp waterproof commando plug, although there is no problem with the exstention lead, it is a temp to get up and running.😀
Hi Tony see your video was good just wandering how many gallons have you got cause I was considering getting the same heater so I was wandering how many gallons you have to see if it would be okay for my pond thanks
22,000 litres or just short of 5,000 gallons
Thanks tony
Hi Tony it's Wayne just a quick question I've bought a heat pump like your one and it's about setting the temperature I've set it for 18 degrees temperature went down to 17.5 when should the heat pump switch back on again it's on heating mode like I was told to do should the heat pump come on again when I drops below 18 thought you would no cause it's the same as your s thanks tony
Hi, the default temp drop setting for restart is 2 degree c, so it would have to drop 2c to start up again, I have reset my temp drop to 1c, which means it will come on more, but work less hard to get back up to set temp, and less temp fluctuation, manual says how to change from default, much as you set target temp, hope this helps.
Yes thanks tony
Haven't got my instructions at moment trying to find it could you help me buy telling me how to change it to 1 c if you don't mind tony so it gives me time to find the book hopefully it will be easy for me to follow your instructions thanks again
What parameter is it number 2 the same one cheers
Or is it parameter c to change from 2 c thanks tony