What is Foundation Fieldbus? | What Components Make a Complete Segment?

Fieldbus isn’t really one thing but more of a collection of things.
Fieldbus is a group of protocols that are used in the industrial arena.
The Fieldbus protocols have been standardized as IEC 61158.
Basically, Fieldbus works on a network that permits various topologies such as the ring, branch, star, and daisy chain.
Prior to Fieldbus, industrial controller systems were connected using RS232 serial communications. As you know, serial communications allowed only two devices to communicate.
Whereas today, the Fieldbus connections are more closely compared to the typical Ethernet connections where you can connect multiple field devices to a single connection point that would then connect to the controller.
However, Fieldbus is not a connection type, per se, but instead, a description used to indicate a group of protocols.
There are several protocols in the group such as ControlNet in the Allen Bradley family, Modbus, Profibus, EtherCAT, HART, CIP, and many more.
A primary benefit of Fieldbus is for field connected devices. For instance, consider you have several field devices that are quite a distance from your controller.
With Fieldbus devices such as sensors, motors, lamps, switches, these devices are connected to an “I/O data block”, which is then connected to a “field distribution device”, which is connected to a Fieldbus power supply, then finally connected back to the Programmable Logic controller.

[@PravinBel-vj3fi]

Hats off to you brother for efforts❤❤

[@ElectricalAndautomation_guru]

Thank you so much 😀

[@ishtiaqahmed1939]

Thanks your good information from Pakistan

[@faizthakur5832]

One of the best video of field bus I have watched.

[@ElectricalAndautomation_guru]

Thanks, please share with your technical groups and friends

[@zeshn100]

Great video sir. You have superbly explained everything.

[@ElectricalAndautomation_guru]

Thanks please subscribe and share our channel

[@ZLastJ]

Nice, mind blowing explanation .thank you

[@ElectricalAndautomation_guru]

You are most welcome

[@hassansubzwari2622]

Lovely video. cant complain. you cleared it all

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@Playrockmusic]

Thanks lot

[@worldinstrumentationengineer]

BAHUT ASSA JI RADHE RADHE🙏🙏

[@ElectricalAndautomation_guru]

Welcome

[@Tceuser]

Nice video...
Need video on PROFINET PROFIBUS...
AND ALSO Industrial CAN controller area network configuration

[@ElectricalAndautomation_guru]

Ok, I will try to provide that

[@salmantalash4515]

buhat ala video

[@ElectricalAndautomation_guru]

Thanks

[@instrumentationlover2473]

Sir automatic terminator kia karta hai.samaj me nahi aya

[@bhuvneshdave2716]

Hello sir. Love your content
I'm and Instrumentation Engineer
And I have a question whole section of your plant is on Foundation Fielbus H1 or you have other Communication protocols as well like HART if so then how do u integrate them.

[@ElectricalAndautomation_guru]

In this plant we have modbus, fieldbus and profibus for I/O level integration and at the computer level communication we have ethernet.
All are a integrated with the help their dedicated Comnication module to communicate with the DCS.

[@ankithooda1536]

@@ElectricalAndautomation_guru What do u mean by Ethernet? Modbus TCP/IP or ProfiNet? Ethernet is only layer1-2 protcol, no? Gets confusing.

[@instrumentationlover2473]

Sir 1bath hai.aap multiplexer ko H1 bal raha hai.and host ko bhi H1 interface bal raha hai.samaj me nahi aya.sorry sir.plz explain.from Bangladesh

[@ThousiEriyal]

Thank you sir

[@ElectricalAndautomation_guru]

So nice of you

[@sahilsiddiquee-fb2ti]

Sir please can draw a loop diagram (like you explain in video) for this video because animation is not looking clear.

[@gajendrachauhan7579]

Well done 👏👏

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@praveengopnarayan2861]

PLease let me know how to calibrate a pressure transmitter on foundation field bus

[@ElectricalAndautomation_guru]

Thanks, please share with others and don't forget to subscribe to the channel.

[@divyangpatluwala7425]

profibus pa and foundation filed bus ..both are same??

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@himalaysharma8]

Sir can you please make a video of profinet with hardware nd software. I am very much confussed with communication in PLC

[@ElectricalAndautomation_guru]

Ok

[@vipulchopada487]

FF ne kitna type ki jb hoti he our kon konsi

[@ElectricalAndautomation_guru]

You can search n the internet

[@muhammaddawood6165]

Sir as mein 4.20ma hoty hai ya vokts

[@ElectricalAndautomation_guru]

It is not having 4-20mA , it has voltage

[@mehulpatel9579]

Sir, maybe is a series connection not a parallel

[@ElectricalAndautomation_guru]

not getting your question?.

[@sandipbilra1384]

Bhai jb ka wiring krna ka video aplod kijiyga

[@ElectricalAndautomation_guru]

OK

[@masumahmed7978]

please move your course very slowly.thanks

[@ElectricalAndautomation_guru]

Sorry for that

[@puttz2]

Wow that cabling looks like shit. Terrible workmanship.

[@instrumetic0074]

Thanks you very much

[@ElectricalAndautomation_guru]

Welcome, please share with others

[@instrumetic0074]

@@ElectricalAndautomation_guru Sir , please send basic information of FF like panel to field instrument