How to Design Triangular Podium Mechanism in Autodesk Fusion 360 | Mechanism Designing Tutorial
Vložit
- čas přidán 4. 12. 2023
- Autodesk Fusion 360 tutorial showing how to design a Triangular Podium Mechanism in simple steps.
Tools used in this video are
1. Extrude
2. Assembly
3. Joints
4. As built joint
5. Contact Sets
6. Offset
For more designs follow on
Facebook
/ madaboutdesigns
Instagram
/ i_m_rohan_deep
Pinterest
/ madaboutdesigns
Fantastic tutorial! Perfect speed for someone still learning Fusion. Thank you
Very good... I made a telescope focuser with this principle... a long time ago!! Thanks for sharing...
thank for you share! I learning a lot
You are great teacher Sir, your commentary is extremely useful in understanding
Muito bom suas vídeos aulas.
Parabéns.
thank you so much brother.
Nice 👍
gracias!!!
hello i'm facing a problem when you are creating a new sketch in 17:42 and projecting the lines
i'm doing the same thing but my lines are floating in the air they are not sticking to the components
Thanks for the answer. What command or function do you use to make the parts move so that the whole design moves together. As you do right in the beginning.
No there is no additional commands. I have shown everything on the tutorial
unground the component
I would like to print this design but I suppose I will have to change a few measurements. Thanks a lot
You are welcome 😊
sir, I am facing problem with the contact test when it is turned off the objects are moving properly but after enabling contact sets at any position after that objects are not moving, please help I have watched again and again what you have done still I did not find a solution.
Overall the projects are good for practice thanks
for providing them.
facing same problem
did u get any solution?
can you share me the cad model.