How to build a butcher block table out of 2x4
Vložit
- čas přidán 27. 01. 2021
- 1 Wood Glue - $17.98
2x4x8 - $5.25 x 25 = $131.25
4x4x8 - $12.13 x 4 = $48.52
5" Lag screws - $1.98 x 14 = 27.72
180 grit sand paper (100 qty) - $19.98
220 grit sand paper (100 qty) - $19.98
Shellac 1 gallon - $46.98
5" brush - $11.98
Dewalt Planer. - $139
TOTAL $463.39
TAX 8%
GRAND TOTAL $500.46
Premium Caster Wheels for... www.amazon.com/dp/B079KWBGHN?... - Jak na to + styl
Pro tip: when you're struggling with the glue drying on you rather than using your hands and pouring it over, try a cheap paint tray and small paint roller ✌
Great tip. This process was very stressful.
When you clipped over to the table at a new angle @9:35 I was SHOOK at how good the table looked after planing.
Don't be down on your casters, bro. That's a great table that will likely last you for the rest of your life. Being able to move it and clean the debris out from under the edges of the wood will add years of life to the lower parts and save you a ton of trouble later. I say kudos to you for getting out there and doing it with just your skills and minimal tools.
Thanks for the encouragement. It’s tough building with limited tools. The CZcamsrs with the dedicated shop and tools makes it look easy and effortless but this was not the case.
@@ImMakingIt I know ! I always have to improvise to make some of the things I see these guys making in their shops ! But I , like you, always come out with a great finished product that looks good and serves its purpose. And we didn't have to spend $20,000 n a shop to do it !!
Man thank you for making this, it was hard to start a project like this without seeing what to do without all of these expensive tools
Glad I could help!
As soon as I saw you start to build the legs out of 2×4 and 2×2 I knew that table was going to be HEAVY lol. No matter though. That thing is going to last for decades sheerly due to how solid its construction is. Props, man
I’m doing this technique kinda for my reloading bench. I need to get a plainer for sure. And I must add you did a wonderful job on that table/work bench
Very cool table! I might give something like this a try for the patio.
Great job on the table! I love the look. I might try this for a counter top and stagger the boards for a different look!
Love the sawdust tip! And I really love the table base.
Love it! Say what you will about pine, fir, spruce or other soft wood. They age well and then, any dings and scratches that are depressing on almost any other woods only adds character to them.
What I like to do instead of hiding screws is to remove them one by one once the glue is set, drill a larger hole and glue in a dowel of contrasting colour. It looks very much on purpose and has never failed me thus far.
Also : connecting the sander to a vacuum will it speeds up the sanding by a lot.
Looks very nice !! I like the finishing touch of how it looks !! 😊
Awesome table. I just bought 2×4's yesterday.
9:51
YES
YES
YES
This man knows what he is doing...
I have been in the Furniture Refinishing Business for many years... and it kills me when someone doesn't use TACK CLOTH to wipe it down between EACH Sanding...
Outstanding! That’s a beautiful piece! Thanks a million for the video.
Casters look just fine. Adds some extra character to a really nice table. Plus it makes it super easy to move! Great video
The casters are genius. This table is awesome, thanks for sharing!
Looks beautiful and very functional. Thank you for sharing
really lovely table and the way you showed everything very inspiring thanks for sharing
Beautiful job love the casters makes moving so nice
Thank you for sharing! This turned out to look fantastic!
Great job, paint your casters to blend in with the timber. Maybe even put them on the inside, it will be harder to operate them but you won’t see them as easily.cheers Wiz
Great job bro. Love how the shellac brought out the beauty of the wood.
Absolutely fantastic. 👍🏻 love that the whole family worked together. 😊 The casters we’re a brilliant idea. 🤔👍🏻
You have a Dewalt table saw. You got my subscription already. Oh great yard. It's all about the yard.
For someone like me who is just getting started building things, this is so helpful to list your full process and materials! Thank you so much!
Great project it came out amazing! Good info in the description too. Keep making videos!
Looks great. Really appreciate the video. I have a 4x8 steel work bench that is a bear to move...thanks for the idea of the castors. I like the height of my table now, and these will keep the height the same. Happy New Year to you and your family.
I'm a DIY myself. You did a fantastic job friend!
Great Job! I don't think the casters take anything away from the looks and adds so much functionality.
Nice patio, good idea to have it double as a workbench
Great Job..awesome idea with the casters!
absolutely love this! very professional and like an earlier commenter said. You will have it for the rest of your life and its something to show off and be proud of! amazing!
Great job. Build things that fulfill their purpose, learn from others who have more experience (usually meaning they’ve made a lot of mistakes), and don’t worry about the rest. Darlington, South Carolina
Great job brother! I love the design.
Your simple easy to follow instructions were great! I'm making it myself too!!! Thx
Excellent video. Thank you very much. I like your easy design and assembly without a lot of fancy tools that you may never use again.
Beautifully done table and well-presented video! Thank you for sharing your process. As a thought on your casters, it looks like you could attach them on the interior sides of the legs to make them less visible if you wanted to. Brilliant work, regardless!
You did a great job made it look not to bad where others could have confidence . thankful
That’s a great looking laminated table top!
Great work! Love the amber color!
Great table and the casters are genius.
Fabulous job. You did a GREAT job
You did well with the planing. I always seem to plane lines into things I try it with.
Same lol.
Beautiful table, nice work!
Great table. Awesome job.👍
I built a monster table using all 4x4 for the base and 2x12 for the top. Your video has given me an idea on how to move the table. You could make a sleeve that has the casters on it. That way you lift each side and slip the sleeves under it. It’s extra stuff to keep around but it doesn’t mess with the aesthetic of the table.
Great Video, well presented, it turned out awesome, looks absolutely fantastic, well done.
You could drill a clearance hole all the way through the 4x4 where the caster screws are and replace them with carriage bolts and a wingnut to make them easily removable. Jut a thought. Great table though either way.
dude, that is kick ass! looks really good.
Nice table! Great build and video work I hope it brings you many years of satisfaction.
Beautiful work!
Great job! Love seeing family projects. Don’t be surprised if you see one of those tables on our patio!
Just promise me it’s better then mine!
That is a WORK OF ART....
BEAUTIFUL
The casters don’t look bad at all! Yea they don’t match or what not but the table shadows that! You did a awesome job!
It's beautiful, well done sir!
That's is awesome. Job well done.
Makes me want to go make one for my porch.
Beautiful!! Very nice and im about to tempy my first build myself.
I like your leg assembly. I thought the built up mortise and tenon joint was pretty clever to be honest.
Thanks for the info… just subscribed and looking forward to more
I love how "not so confident" you sounded in the beginning and then BOOM! You made one of the best home made tables I've ever seen. Great work. I look forward to more crafts. Will definitely share your page and get more to subscribe. Great stuff man.
Thanks for the encouraging words. These all started out as a documentary for my kids to see when they’re older. It’s been hard to make anything these days because of inflation. Thanks for sharing my video! Too cool!
@@ImMakingIt Yeah inflation is hella crazy right now... can thank Biden for that :D
lol He is just trying to formulate his sentences to convey the message he wants to send. Not all intelligent people can bring their thoughts into speech as well as they would like to. He had a plan in his head and knew how he wanted to execute it.
Nice job, thanks for posting!
awesome build
I think if you install Caster Wheels on the other side, it won't be that much visible BUT OVERALL you did a marvelous job!!!
Smooth legs 😁
And the table legs came out well, too
That's a cool table , great job bro!
Great build bro .
VERY NICE! CASTERS LOOK GOOD.
Good looking table!
Good vid!
And excellent table!!!
Thanks!
Great build!
Nice work man!
That’s a nice build ❤
So cool! Great video and really helpful. Thanks so much! Nice job. :)
Super nice work , great video .
Thank you for the video. Great job!!
Hello sir, as they say, woodworkers or builders are their worst critics. I think the movability of the table well outweighs the look of the casters and was a good decision. Nice table.
Wow. Great build. Fun to watch.
Wow this was great ! and the casters were a good idea
Good job bud, turned out great!
I like some of what you did. The way the base is built gives ya plenty of "toe space" and it can be used as a pic Nik table as well as a work bench. The casters are nice and The shellac looks good (I wouldn't have thought of that.
Nice finish on it
Great and simple man. Sure there are ways to make it more complicated or intricate. But for about $200 bucks, that's an awesome table people pay $1000s for. Well done!
great job, i was amazed through out
Very nice work !! Awesome idea.
thats a great looking table :)
Cool project!
Nice build!
nice! im about to try this out thanks a ton
Not to bad. Love the casters.
Fantastic job!
It looks great nice job.... 🤙
This is awesome dude!
Nice work, l made a work bench last year. The glue process is actually quite stressful and a planer and belt sander really helped to finish.
You’re right about the glue process. Off camera I was so frustrated that I rubbed the glue on with my hands and it took about a minute to complete the glue up. Much quicker then a brush but not even coverage
Awesome table!!!
This was great. I'm planning on doing my kitchen table and bed frames this way. Short on tools and wood right now.
I used the barebones minimum tools to build it so hopefully you won’t need more tools then what I’ve used. I see wood prices finally dropped.
Nice build man
Very Very Nice. Thanks for sharing.
Dude this is beautiful!! Great 👍🏽 job
Thanks! Im glad you like it.
Very nice job
Awesome, thanks for sharing.