Perfect OOB finish for under $5! - HOT TIP (remove nubs w/ glass buffer)
Vložit
- čas přidán 26. 01. 2020
- linktr.ee/citrusjuicebox | Good solutions aren't always expensive. Don't overpay!
Glass nail buffer - amzn.to/36sjROA
Melamine sponge - amzn.to/36w1w3k
Built with Valtcan - amzn.to/2M4K3pz
Want to send me something?
Citrus
P.O. Box 40622
Bellevue, WA 98015
I participate in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites. - Jak na to + styl
![How to Get into Gunpla: Essential Tools to Start Building [Tutorial]](http://i.ytimg.com/vi/G3LLU0rB8XQ/mqdefault.jpg)
Yikes, I thought you were gonna say like $15 or something but 45 bucks is absolutely ridiculous.
I would literally rather eat $45.
@@citrusjuicebox sounds like a great idea for your next video
*_Modern problems require modern solutions._*
Respect for doing this!
Damn, just one trip to cvs and I got everything under 5 usd thx citrus!
Learned alot from this vid that i didn't expect to. Cant believe how much plastic dust the water captures. Also, cutting nubs while keeping direction in mind. Thanks citrus, subbed
@SHAHMI ISKANDAR BIN SHAMSUL - Hey, no worries. Okay so first, you'll want to know that higher-end (more expensive) nippers tend to have one blunt side (right) and one sharp side (left) when looking at them from the front. This allows for cleaner cutting and reduced plastic stress
ok now, notice how he's cutting the nub so that the direction of the sharp side (which remember, is on the left side of the nippers) is moving towards the edge of the plastic on that particular part. This means the sharp left-side of the cutter is moving towards the right as it cuts, away from the center of this whole part. This way, it reduces the chances of you stressing the plastic on a visible surface, and if there is stress, it's less noticable because its on the absolute edge of the part.
Then youll want to finish by carefully using a hobby knife (following the same rules above, meaning cutting towards the edge of the part) to completely remove the rest of the nub.
Hope that helps!
FYI tape or like masking tape works really well for cleaning a file
I had a similar suspicion myself about being able to find a generic version of this for a fraction of the price, appreciate you doing the legwork!
When I found out about this raser product, I just laughed my ass off considering that I've been using those exact same tools that I bought for a significantly cheaper price. Big respect for posting this vid! 👍👍👍
Citrus you are awesome. Glad you spoke out about this.
Was going to buy a set after seeing zakuaurelius's vid. Glad i saw this first.
your video is so good! i searched for bunch of videos before this, and you just convince me. glad i subscribed. please keep making this kind of tutorial, its very informative especially beginners like me.
I'm super impressed with that result, suppose I ought to give it a try myself! Thanks for the great vid, a perfect how-to
Awesome! I just bought 4 buffers using your link. Thank you!
LMAO, I've been saying this to hobbyists for aaaages. GOOD man for finally showing people how insane this extortion is.
I barely started gunpla! I needed to know this! Thanks so much. :D
Thanks so much I just got into gunpla . This is going to help me take my kits to the next level
I can attest to the effectiveness of the glass buffer/nano nail file. I even used this file on my clear kits and for under $1 you can get a similar effect to those of the GP filea
Thank you for posting this video Citrus. Damn. The tools you need in order to make your gunpla look clean are really expensive. Now I just need to spend 3 dollars (150php) to make my gunpla look more clean. Thank you so much ❤️
Wow, this is a cool technique!
Thank you so much for this valuable tip!
That's refreshing! Kinda always wanted to see people to roast such business dealers who tries to earn for little effort from folks. And you did it. In style! Was cool to see your videos again mate.
By the way I used this for years..and the result so amazing than usual files..
So clean, so clear too
thanks citruss!!!
Damn, good work Citrus! I didn't know glass files existed!
Same here thanks to him bc i was about to buy the gunprimer one🤣😂
i just came across your video. thank you so much learned a lot. Unfortunately i already ordered my gun primer file. the water idea is brilliant. thanks again
always love your vids man, I also just knew about this
Thank you for this video. I bought the file and mr clean erasers. These two work so well I had to share on reddit.
Very nice. I alternate sandpaper sticks and wet sanding. The only difference is that I don't get the sheen back even if I wetsand at 2500 grit since it's been scratched from 600 and up. The glass file is interesting
Thank you for this nice tutorial
I decided to try the Dspiae SF-20 and a very small, generic glass file I found on the makeup corner of a convenience store because of this video.
I used them both dry and wet just to see if there's any difference. The Dspiae gets clogged much quicker than the generic which I suspect is because of the finer grit, and dipping it in water doesn't seem to change its effectiveness. But the generic file only takes 3-4 more passes to achieve the same result as the SF-20 while also being able to reach more nooks and crannies because it's much smaller, and in addition, if I tap it lightly against the cup, way more of the accumulated dust come off of the file, which I again suspect is because it has a coarser grit.
To sum it up, it's 5-6 passes vs 8-9 per nub but the generic file is more practical due to its small size and ease of cleaning. And the plastic I used the two files on was I think almost entirely ABS (4 sets of those Bandai Shokugan ones).
Always use nail buffer before, maybe i should try glass nail buffer for the next build
Just bought some of these files on Amazon! Thanks for the video, also, love the rabbits =) Ive got two, myself.
Thanks citrus for this info... :)
Thanks a lot! I just bought a generic glass nail file/buffer for less than $5
Worth to subscribe
Thank you. I thank you.
Citrus! I think you should do more gunpla hack/tips or budget way to get things done, because cheapskate gunpla builder do exist such as me 😂
Great tip for using water
thanks a lot for the info
Subscribed for this video
Do you have any guides on how to hand paint gunplas including the joints?
I’ve used both and there is a difference... you should really do a comparison video.
this video was enlightening, I buy 3 for 5 € !
Citrus, please do review some 1/144 RG/HG.. please???
Not all hero’s wear capes!
but if the nail files make me go back and forth im gonna start rounding corners. amazon seems to differentiate shiners and files, but the vendors tend to use both terms to maximize hits. I would love to see which files cut fastest. and they seem to change products in 6-12 months. the newest feet files seem to have the coarsest patterns. the coarsest nail file I've seen is 3/4 in. wide too. narrower is better.
Wish I saw this before I ordered the gate remover set lol
I usually just skip the numb removal part because you end up spending minutes on just one piece. Now i still want my parts too look good and so i bought the generic nail filer, but i end up still spending more time with them, because they are slow, and too big. So from what i heard is that the raser is a lot faster and easy to work with.
Just a couple of days ago I was thinking about mr. Scissors ✂️ 🐰
Agree 50/50, this is the godhand debate all over again. Yes they are super overpriced but you can’t completely write them off just because they’re expensive. Many who use them will swear by them just like godhands
Would rather see a comparison video
Huh, I just used sanding sticks of different grits to deal with nubs. Thanks for the hot tip man. I wonder if those glass file/buffer sticks are sold in cosmetic stores? Might go check it out later
Yes, but not all cosmetic stores may have it, or for very cheap. I love buying buffing sponges in bulk though.
Would you recommend this instead of sandpapers?
.....Well, better late then never amiright? Thanks for the tip Citrus I'll be sure to use that advice for my next kits!
Also I'm gonna try and custom paint some kits so are rustoleum spray cans a good idea to use?
Thanks! I'm not sure. I haven't tried Rustoleum colored paints before. The finish probably won't be very fine.
@@citrusjuicebox I see, thanks for the input! Are there any sprays + topcoats that you'd recommend?
@@ZonoYT Rust-Oleum matte clear is pretty good topcoat for the price. Gloss isn't as good.
@@citrusjuicebox awesome, thanks man
Can this technique work for seam removals?
youtube is awesome. Yesterday I saw a review of that expensive kit and I though "What? A glass file? How is it possible"
And today I see this video! Thank you Citrus.
I hope to find this nail glass file. It' the first time in my life that I found a file so smooth that I have to make the surface less smooth...usually is the opposite!! :P
Thanks a lot! It is much appreciated. just your video and it was timely and I'd say it absolutely is a money saver! I saw the set from Gunprimer but I found the price to be so ridiculous. I will try to look for the glass file in my local Daiso store or Amazon.
Good luck with your search! I couldn't find this at my Daiso, but melamine sponges should be available in the kitchen or cleaning sections.
Well, I'll be-!! ...Sonovva-! ....Danggit!! DUDE! U just turnd the Gunpla Universe Suppliers on their heads-!! And saved ALL OF US a LOT of MONEY!! Just like n Creation - the best Engineering & Design & processes r the SIMPLEST ONES-!! Thx so much!
I bought two of those recently on eBay for 99 cents each shipped.
Good alternatives. By the way: When's the HGUC Zeta Plus review coming?
Eventually.
Here in the Philippines, it's only a buck lol. Thanks for tip!
omg thank you so much Citrus, this is going to save my wallet and having to buy overseas due to the Rona...MY EYES ARE OPEN! haha
Great. I saw the advertisement of that stuff on a hobby magazine. Now I know it's a scam. Thanks.
Looking forward to the new Astraea type F even though I know full well that it's not coming that soon :)
Hello I tried out a glass buffer, if Im going to flat coat the kit anyway, can I skip the sponge step altogether?
Honestly I really like the glass buffer as a sanding or file alternative because of the fact that you can wet it and it seems like a good way to just flatten a nub without switching grits at all.
I love the recommendation in this video despite not really knowing about that wack ass scam lol
Skipping the sponge step is probably okay.
I've been using a regular nano file and the dspiae siren and both are equally good and both are cheaper than the gunprimer -- however, I did not have a good experience with the melamine sponge, since it would leave scratches
The melamine sponge shouldn't scratch unless there particles left on the surface while the sponge was used. The resultant surface should be evenly matte.
@@citrusjuicebox it was a brand new sponge
what grit is that sponge?
5:41 Your rabbit is doing so well after that medical issue. Is there brick and mortar shops that sell the Glass Nail Buffer?
what is your mat called
does this method work greatly on curved surface too, by sanding on different angles based on the curved surface?
Yes.
Nano glass file existed? I think I will stick to sanding paper and sponge
Any substitutes for the "recovery" cloth tool for a gloss finish?
Any number of buffing cloths will work. Your local hardware store probably offers some.
5:30 Floofy bun!
50% haircut!
Too cute
nice to see an alternative about this. Seems like the other youtubers got sponsored and trying to sell the most expensive glas file to us poor modelers
Lol, nano glass file go for around half a dollar in a nail care shop
How long does it last? Do they wear out like the sanding sticks?
It will wear out eventually. The construct looks like metal pips adhered to the glass surface. How fast it wears out depends on how aggressively you use it.
It is kinda odd I started building gunpla kits last year but have always built model kits or miniatures for tabletop games I use the same tools and the same method but I never cut to a nub then finish it via filing i just cut right to the model and use an exacto knife if needed to smoth out and get great results. Why do most gunpla builders use this method?
I used to shave down a knife as well, but I was getting frustrated with my own inconsistent results, so I started experimenting with other methods. Sanding is probably more popular in gunpla because many people like to leave their kits unpainted (like me), so preserving the plastic surface is important.
Oh well. I like my gunprimer razor. Guess I got a bad deal but at least it works well.
Lol, it better works, if not that's a scam
i have both, gunprimer's is better. this finish is a bit better, its a lot more comfortable in my hand, i guess cuz of the curved side and it cleans better. like i primed kits then use both to clean up imperfections, and the cheap one got "clogged" faster and was kinda a pain to clean out. granted i used a brush and didn't think to use water like you did
They also sell something called VOID... ooooh edgy name! .... for $250 USD plus shipping! It’s nothing more than a dust extractor. Professional nail salons use dust extractors that work just as well, if not better, at a fraction of the price. The lesson learn is, do your research, know what tools are truly worth it folks. Spend good money on good tools. Avoid shitty or pointless products and use that money to buy kits instead.
Why do you recommend single blade nippers over double blade ones?
Also, unfortunately the link for the buffer is out of stock.
It give less white stressmark than double blade one
Single blade cuts in one direction, which gives you more stability and control, resulting in a cleaner cut. Double blade pinches the gate in the middle, which can damage the surrounding plastic more and needs more clean up.
I did a review on this on the gunpla reddit. The only thing that's worth buying from them are the Balancer sponges, 3 for $6 USD. Just buy the glass nail file for cheap on amazon. Then you'll have a raser kit for 35$ cheaper lol
If you're shopping online, even 3 blocks for $6 is too much. Plenty of bulk listings will happily sell you 20 or more for less than $10.
@@citrusjuicebox I've used regular nail buffing blocks. They didn't achieve the same matte/semi-gloss/gloss look the way the Balancer did. Which is why in my opinion, that product alone is worth.
So glad I came across before I could buy the Gunprimer items. Blessed CZcams Algo.
Man i straight up emailed gunprimer asking why their prices are so high. I'll let you know what their response is.
Have they responded?
Any news?
So?
Any idea what the approximate grit strength is?
I want to say 800, but I can't be sure
So I'm using it in a wrong way? 0____o
Is it work for curve parts?
Yup, just be careful to follow the curvature closely, so you don't end up with any flat spots.
damm actually unavailable :(, or just for me.. im from mexico, any other option? plisss
Search for "glass nail buffer" on any marketplace and you should be able to find some
still got scratch mark all over the part for oob build
ridiculous u can buy nano glass file for a dollar 😅 they charge as if it so special coming from them lol😅😂 good job citrus 👍👍
Or just use a 4 step nail file, no idea why people are paying that much for a file 🤦♂️
This the best and cheap
local man annihilates company
The gunprimer and infini models of glass files are far superior to the Amazon no name brands you truly do get what you pay for. The cheap ones work. But the result is far from as good as from the other two.
Ahh, the gunprimer raser... Those who own one swear by it, and those who think $45 for a $1 tool is beyond absurd will never even think to touch it.
Personally i use dspiae's siren. They're like a good compromise at $5. The water trick works really well with it.
There's snake oil in every hobby, and I'm pretty disappointed it hit gunpla as well. FWIW buying a slightly nicer one ($5 range, like you said) is probably worth it. Some of the cheaper ones will wear out quickly, and it's just not worth the hassle to replace them, especially if you build a lot.
Me: Originally knows about gunprimer and looks at the price and with the conversion rate to CAD, simply laughs at the absurd price and shipping.
Also me: Watches this, realizes the waste of money that this is and goes to local pharmacy to buy a glass file
Some of their products are pretty pointless too. They sell a product called Joint Guard which is, and I am not kidding, a piece of precut tape. That’s it folks. Nothing special to see here. They use it to tighten joints... something you can cut and do yourself, or better yet, do what modelers have been doing effectively and cheap for over 40 years and use a bit of CA or nail polish on the peg, let dry... viola! tight joints. What GP going to sell next? Small precut sand sponge squares for 20 bucks?
Don't know why you're getting any dislikes. Appreciate the guidance.
Lol why did I have a feeling it would be this? This thing is a ripoff, I got the same thing on Amazon for a couple bucks.
Yeah the one from gunprimer is reidicilous like 45 dollars for something that can litteraly be bought for three dollars the gunprimwr poeple are crazy
whats this? some makeup set lol
Resourcefulness never hurts.
@@citrusjuicebox I'm still amazed at how they price gouge things that are under a dollar each
put this on reddit and twitter hope noone get scmaeemds
So, someone somewhere actually spent $45 to retain the plastic looks of their gunpla and by doing so making their gunpla looks like a toy instead of spending the same amount of money to buy some paints or at least top coat to make their gunpla looks more realistic? I'm not against people who prefer to not paint or topcoat their gunpla but it baffles me if someone actually spend $45 just to keep that plastic look
Right? Seems like the whole point of OOB is too be less expensive.
this product is for removing the nub. even if you are painting your kits a product like this is still useful.
@@JangoTheBlueFox or you can just use sanding stick, sanding paper, or sanding sponge. Even the sanding paper that tamiya made, which is quite expensive imo is much cheaper than this. And after painting them or even just using top coat on them, the mark left by sanding won't be visible anymore
$45 is too much
Uses $90 nippers.
I mean, I use $15 nippers, which is about as you can go before really starting to compromise on quality.