Not only can increase speed and spin, falco booster can take away the old glue that on sponge for long time. Just apply a layer of booster on your sponges, after 15 minutes, booster will soften the old glue and can be rub it out easily with out damage the sponge , especially good for those expensive tenergy. After remove old glue, just apply one more thing layer booster, then let it dry and reglue it back on your blade.
it seems that you put way too much booster on the rubber... which may or may not be a problem -- if the top sheet does not bubble up, you are fine :) But for sure, you would need either 1. a gluing press (like "Yasaka / Clicky Press II", or home-made, doesn't matter), or 2. patience - until the rubber is almost straight again, so that it stays glued to the blade (instead of the edges un-gluing themselves under the curling force of the boosted rubber).
so if I have exactly this type of booster after 3 months its gone and I need to do this again and again every 3 months. But what if I have another booster?
Thank you for the instructional video. Doing my second set of rubbers (DHS H3N & Yinhe Moon). The effect is still there on my other blade (now two months of use). For whoever contemplating in buying the product, the rubber becomes noticeably bouncier and spinnier. Please have patience while boosting the rubber, do not rush the process. Have fun!
@@akulagitahu1931 anything under 3 ppm is undetectable - so How can you say it is illegal if it's not causing harmful vapors - vapors where the purpose of the sppedglus ban.
I really dont like putting a layer of glue before the booster... I did it with a Hurricane 3 Neo and it felt like wet glue just before being ready to glue to the blade, didnt like the result. I unglued the rubber from the blade, peeled off the glue and glue again from dry, better result. Also, i dont feel the booster will get straight to the sponge if i put a layer of glue first interfering with the sponge-booster interaction
and also prevents the local (small surface area) over-soaking (over-saturation with booster of, say 1 sq. sm of the rubber) -- thereby *preventing bubbling of the top sheet* - this is the primary reason for the application of the layer of glue (i.e. *gradual* absorption of the booster)
you just need a bit of patience and simply *wait* long enough for the "wet glue" to become "dry glue" -- and depending on how much booster you have applied to the rubber, it may take some time
i ve applied the booster for the 2nd layer but my rubber still not curve since the first layer. already waiting for a day. am i did wrong ? i am using h8
Hi, im out of glue so can i like use butterfly free chack first time before applying the booster.... then like nittaku finezip glue when gluing to the blade?... after the booster process? or do i need to just use one type of glue whole time?
ViolinMusic I've combined 1 layer of Nittaku Finezip with Donic vario clean, have had not problems really. I suggest using the Finezip as the first layer though since it's easier to peal off the sponge without damage.
Forgot to mention.. I used the vario clean as the first layer on the blade though since I use sumptuous wood sealer and don't want the rubbers coming off
I am trying to the steps, after 2nd layer, I have already waited for 2 days, the rubber is still very curly! What have I done wrong? Can I glue it even if it's very curly?
I think it was because I applied to much booster… I had waited 3 days, the rubber was still very curly, i glued it anyway, a little off on the edge, but it's okay overall. Thanks for the tutorial!
Since you are from Asia, can you tell me if there really exist the Commercial, Provincial and National versions? Or just the sellers pretend they exist and just want to make more money. Thanks.
Hello, thank you for the nice video. Can I boost the neo H3 without peeling off the factory tuned layer from the sponge before applying the booster? Thank you
daniel arellano You're referring to a new uncut sheet of rubber right? You can boost it and then cut it, that way it's less complicated than cutting and gluing a an older, used rubber.
In fact, you did the right thing. Putting the glue before applying the booster interferes with the rubber-booster interaction and thus, making the effect of the booster weaker. In short, its not at all a problem. You did the right thing.
With effect from May 2007, glues containing harmful volatile compounds (VOCs) were no longer approved by the ITTF. Source: www.allabouttabletennis.com/table-tennis-glue.html . But I remember that was postponed and finally banned many months after Beijing Olympics.
That's because a layer of glue acts as a middle layer for oil to penetrate into the sponge. Without glue can be done as well. However, more chance of damaging the rubber
+Ping PongProTips No, it is not legal but after a few days is hard to detect. Most of the top players are doing it to some degree but technically it is illegal.
@@MainDoodler DHS sell a H3 national White package Since 2018 and a H3 star player national límited edition pretuned. I use It, It is better than provincial. Maybe It is not the same rubber that the national chinese players use but It is sure better than provincia but more expensive. Equally provincial is nice, we dont need better rubbers.
But there are many "fake rubbers" of provincial and national versions out there. So better use commercial version, if you are not a pro and wanna save money.
Boosting doesn't just soften up a rubber. It expands it and makes it more springy. Furthermore, soft rubbers typically come with grippy topsheets. Think Tenergy 05. A lot of times here people are boosting Chinese tacky rubbers. They're simply different.
Not only can increase speed and spin, falco booster can take away the old glue that on sponge for long time. Just apply a layer of booster on your sponges, after 15 minutes, booster will soften the old glue and can be rub it out easily with out damage the sponge , especially good for those expensive tenergy. After remove old glue, just apply one more thing layer booster, then let it dry and reglue it back on your blade.
Watch this in 1.5x TRUST ME
2x
Is it true, that the Falco Tempo long booster makes the sponge a bit softer?
It's like listening to a fairy tale. Sleepy
yeah very nice voice ..
illegal
pro trick: you can watch movies at Flixzone. Been using them for watching all kinds of movies these days.
@Bowen Rylan Yea, I've been watching on Flixzone} for years myself :)
Use Hurrican 3 "NEO" or regular is better for boosting?
Hello
How many times can we boost the same rubber?
And in those many times how many times will it grow bigger in size?
What's the roller that you used and where can I find it?
What if i buster and then i want to chance the rubbers to another blade?
Do I have to buster again?
Thanks a lot!!!
What happen if the rubber doesn't ver courved after applying a layer of Booster?
Can you glue the rubber when it is like a circle in shape? very curly and i waited now for 3 to 4 days
it seems that you put way too much booster on the rubber... which may or may not be a problem -- if the top sheet does not bubble up, you are fine :) But for sure, you would need either 1. a gluing press (like "Yasaka / Clicky Press II", or home-made, doesn't matter), or 2. patience - until the rubber is almost straight again, so that it stays glued to the blade (instead of the edges un-gluing themselves under the curling force of the boosted rubber).
Is that an already glued rubber? Just peeled of?
It really takes some steps. But sometimes it is worth.
so if I have exactly this type of booster after 3 months its gone and I need to do this again and again every 3 months. But what if I have another booster?
Does the rubber need to be new?
why do you put a thin layer of glue on the rubber before you are adding the first layer of booster?
+Pumsti MK8 its like a protection layer. otherwise you can damage the sponge
Thank you for the instructional video. Doing my second set of rubbers (DHS H3N & Yinhe Moon). The effect is still there on my other blade (now two months of use).
For whoever contemplating in buying the product, the rubber becomes noticeably bouncier and spinnier.
Please have patience while boosting the rubber, do not rush the process. Have fun!
Fa'iq Shafik legal for tournaments or not
@@reezrun899 not legal, definitely for recreational use
@@akulagitahu1931 anything under 3 ppm is undetectable - so How can you say it is illegal if it's not causing harmful vapors - vapors where the purpose of the sppedglus ban.
I really dont like putting a layer of glue before the booster... I did it with a Hurricane 3 Neo and it felt like wet glue just before being ready to glue to the blade, didnt like the result. I unglued the rubber from the blade, peeled off the glue and glue again from dry, better result. Also, i dont feel the booster will get straight to the sponge if i put a layer of glue first interfering with the sponge-booster interaction
it allows the soaking of the boosting oil to soak in evenly and slowly preventing the rubber to be too curly
and also prevents the local (small surface area) over-soaking (over-saturation with booster of, say 1 sq. sm of the rubber) -- thereby *preventing bubbling of the top sheet* - this is the primary reason for the application of the layer of glue (i.e. *gradual* absorption of the booster)
you just need a bit of patience and simply *wait* long enough for the "wet glue" to become "dry glue" -- and depending on how much booster you have applied to the rubber, it may take some time
i ve applied the booster for the 2nd layer but my rubber still not curve since the first layer. already waiting for a day. am i did wrong ? i am using h8
your layers of oil must be very thin (which is better than adding too much)
Great video! How do you reboost? Do you have to remove the glue and then do the process again?
Yep remove the glue first.
Hi, im out of glue so can i like use butterfly free chack first time before applying the booster.... then like nittaku finezip glue when gluing to the blade?... after the booster process? or do i need to just use one type of glue whole time?
ViolinMusic I've combined 1 layer of Nittaku Finezip with Donic vario clean, have had not problems really. I suggest using the Finezip as the first layer though since it's easier to peal off the sponge without damage.
Forgot to mention.. I used the vario clean as the first layer on the blade though since I use sumptuous wood sealer and don't want the rubbers coming off
I am trying to the steps, after 2nd layer, I have already waited for 2 days, the rubber is still very curly! What have I done wrong? Can I glue it even if it's very curly?
Um...if it was too curly, it might be you applied too much or you haven't waited enough time. In the demonstration, we waited for 1 day.
I think it was because I applied to much booster… I had waited 3 days, the rubber was still very curly, i glued it anyway, a little off on the edge, but it's okay overall. Thanks for the tutorial!
Since you are from Asia, can you tell me if there really exist the Commercial, Provincial and National versions? Or just the sellers pretend they exist and just want to make more money. Thanks.
how often would you apply booster on rubber and reglue?
2 to 3 times. It depends on the rubber and how much effect you want
Hello, thank you for the nice video.
Can I boost the neo H3 without peeling off the factory tuned layer from the sponge before applying the booster?
Thank you
you should remove this layer, it is not hard
How many booster you put on Neo?
Can you tell me how much does this falco tempo long booster cost?
phiên nguyễn hoàng
30€ in germany 150ml
but the sponge expand and lose a bit or hardness degree
where are your shop
Do u sell the equipment also 😊
I need to cut the rubber first or I can do it after put the booster?
daniel arellano lol wtf
You'll have to cut it afterwards anyway - as it will have expanded. You do not need to cut it first.
daniel arellano You're referring to a new uncut sheet of rubber right? You can boost it and then cut it, that way it's less complicated than cutting and gluing a an older, used rubber.
Do you apply it the same way on a tenergy 05
no please not that is not chinese rubber you dont need that
how to remove booster ?
Do I have to use a booster on H3 neo ?
Yes
I forgot to put the glue before. is this a problem?
In fact, you did the right thing. Putting the glue before applying the booster interferes with the rubber-booster interaction and thus, making the effect of the booster weaker. In short, its not at all a problem. You did the right thing.
If I'm boosting a new Hurricane 3 neo, do I remove the glue like layer on the sponge before applying the WBG or WSG and the booster?
I think you don't need to remove that layer before applying.
Is it still legal?
Yes it is legal for competition. I used it once and passed the test.
If it's legal, what has been banned?
With effect from May 2007, glues containing harmful volatile compounds (VOCs) were no longer approved by the ITTF. Source: www.allabouttabletennis.com/table-tennis-glue.html . But I remember that was postponed and finally banned many months after Beijing Olympics.
i think its illegal but there is no way to test it so most of the top level player use it
I think you pointed out the phenomenon out there---many players are practically using that.
you have Facebook or something like that, I would like ask some questions about glue and booster.
what type of glue should we use
Brownie Glitch i use falco water glue
Base in water, not speed glue
Water based glue, like Joola X-Glue or Falco Water Glue for example
Can u use it on cricket bats for longer travel
Why do you need to put a layer of glue first?
in the falco's instruction, it doesnt mention anything about applying glue before the first apply of the booster.
Can some1 write why glue before booster is apiled?
whatscreenname I read from some forum, that adding a layer of glue slows down the absorption of the booster, thus making the booster effect stronger
I accidently removed the glue after the 3rd day. I should not redo the whole process, right?
That's because a layer of glue acts as a middle layer for oil to penetrate into the sponge. Without glue can be done as well. However, more chance of damaging the rubber
what if u glue 5 hours after applying lol
Is this legal for competition
Yes it is legal for competition. But it is recomended you use it 2 to 3 days later.
+Ping PongProTips No, it is not legal but after a few days is hard to detect. Most of the top players are doing it to some degree but technically it is illegal.
I see your point. But we agree currently it is hard to detect and most top players are doing it to some degree.
+Edmund Ng For sure, I just didn't want the person asking this question to start bragging about his new booster in a tournament and get kicked out. :)
成功需苦真幹、原來塗膨脹劑要搞幾日
jesus that's 500 dollars worth booster on his desk?
mendebil its china its probs FAKE news
good thats right. better use Provincial or National Version of this Rubber
Karsten KΣtmΣ lol
U can't get national, because it's only for national team and they also use boosters
@@MainDoodler DHS sell a H3 national White package Since 2018 and a H3 star player national límited edition pretuned. I use It, It is better than provincial. Maybe It is not the same rubber that the national chinese players use but It is sure better than provincia but more expensive. Equally provincial is nice, we dont need better rubbers.
But there are many "fake rubbers" of provincial and national versions out there. So better use commercial version, if you are not a pro and wanna save money.
So why not buy a soft rubber on the get-go? I still don't get the difference.
Boosting doesn't just soften up a rubber. It expands it and makes it more springy. Furthermore, soft rubbers typically come with grippy topsheets. Think Tenergy 05. A lot of times here people are boosting Chinese tacky rubbers. They're simply different.
It retains some properties of Chinese rubbers that most players want to preserve.
hurricane tree
めちゃくちゃ補助剤置いてるじゃん
バヤリース それな
booster after glue ?????? wtf....
against ittf rules this is like drugs for a race
FuriousGamer 876 not really
Whiner
Don’t use that harmful shit
stfu and learn the materiels that's used. its not harmful in any way
What's harmful about it
It really takes some steps. But sometimes it is worth.