Coleman CT200U EX Electric Start
Vložit
- čas přidán 10. 09. 2017
- Today I install a electric start 7.0hp engine on the Coleman CT200U-EX. Still needs a little fine tuning and then that 50t sprocket switched out for the 62t. Come back next week for even more upgrades. Don't forget to like, comment and subscribe to help us grow.
Coleman CT200U-EX CVT Kit - goo.gl/Mybh3C
What to support the channel by becoming a patron - patreon.com/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - rbg_redbeardsgarage14
-----------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
10% Discount Code - red beard
Parts used in this build -
Electric Start 6.5 Engine - amzn.to/2xrovQ0
Mikuni VM22 Carb - www.gopowersports.com/vm-22-m...
Build Your Own Header Kit - www.gopowersports.com/build-y...
Springs For Seats - www.gopowersports.com/adjustab...
30 Series CVT - www.gopowersports.com/tav-30-...
420 Chain - www.gopowersports.com/420-sty...
-----------------------------------------------------------------------------------------------------------
Music used in the videos - Exclusion
CZcams : / exclusion. .
Soundcloud : / exclusionofficial
Instrumentals by Chuki Beats - / chukimusic
-----------------------------------------------------------------------------------------------------------
Tools used to make this video Possible
Lincoln Welder - amzn.to/2ufsIQX
Welding Gloves - amzn.to/2sYQBg4
Welding Hood - amzn.to/2tlBNvb
Welding Cart - amzn.to/2tlCHb3
Sony Camcorder - amzn.to/2ufAb2k
Mic - amzn.to/2tVk8rn - Zábava
OMFG best video yet amazing job
The natural leaves really do make good camo stencils.. I use them when camoing vehicles usually
I love your video's man keep up the good work RBG
+oxi clean get the tough stains out nick thanks man
I've been using Walbro carbs and most often they come with a larger jet as well as a choke. They make them for replacing dirt bike and 4 wheeler carbs so I make a custom manifold but have really been impressed with them. Fact I put one on my kids minibike like this one we got from tractor supply. It really woke that thing up. I used an atv muffler and it runs awesome with a bit of backpressure. Just what I've been running hope the info helps.
Love your vids
I added a 3 liter gas bicycle tank to the storage tank on my Coleman ex, fits inside! Rubber mounted works great!
Just bought mine yesterday. Love your channel, keep it up.
CyclingJunkieUSA do you still have it? Have you had any problems with it?
Cardboardguy 14 I had to take it to repair shop (under warranty) throttle was sticking. But it’s fun as heck. Coleman was easy to work with. No issues
Thanks for the hard work on posting these videos. AKA Robert Earl
+Greg Sullivan thanks for watching man
The music that runs from 6:52 to 9:33 is downright creepy! It felt like I was watchin' Steven King novel turned into a video.
We like to keep you on your toes lol
Pink and yellow!
Way to Kool Bruhda, Awesome Projects! Desert Tan Camo. Multi-Cam Apreciate your Vidz. God Bless Be Safe
+KrayJay Dyna LRS -'17 thank you brother
On the seat pan you can pick up a cheap skateboard and use it. That way it will have the kick up to hold your butt in on the rear and be wood so staples hold the cover on (easier and more secure than most customer grade glues). Bonus you can use the other end of the deck to do another seat. I pick them up from yard sales for a few bucks just for this purpose.
For paint I suggest painting the engine cover tan to match the bike frame. I'm not even a camo fan but it looks pretty good on this bike.
Have to agree with others; Gun metal grey and gloss black rims. The chrome headlight may help as an accent.
I just bought a brand new ct 200u-ex mini bike. I am keeping mine stock!!!!!!
You could take one of the rubber drain plugs from the bed of a pickup truck and drill the same size hole as The one in the bed and wala you have a plug for your toolbox !! You'll be able too take off and replace as needed. Just a thought !!
Paint the motor camo.. use pine needle, oak leaves, hedge leaves to hold up and spray over after you give the motor a camo base coat.. then clear the finished product
I talked to Aron about the mikuni he hooked it up ,thanks though!They are great over at GPS
Paint it gunmetal grey and paint the rims black
Da Jack Is Back Yessss
rainbow glitter with neon purple lighting on the underside.
No don’t do that. Paint the fuel tank and pull start cover black to make it look like factory. It will look like it came from the factory like that.
White frame, gunmetal fairings and tool box, and red engine cover!😉
+bruce roberts i kinda like that
Nice job. I’m thinking of doing this Coleman mini bike. Looks like fun. How about a golf cart electric to gas, a cart with lots of speed. And more torque. Thank you RBG great work and videos on how to.
I think desert tan digital camo vinyl wrap would be great on the engine!
I see RBG go in bro that bike look cool 🙂🙂🙂
+Hot Canon29 thanks man
Red Beard's Garage u welcome
What was the first beat called at the begining? Thanks
Why did you route the exhaust pipe over to the right side of the bike? Why not go straight back with it, along the left side? Or through the rear frame tubes?
Im going to predict that 1 year from now you will be at 120- 140k subscribers with the way your uploading good content.
+Chad Linton. I appreciate that man
You were right
@@ianwalsh4051ive been looking for this old comment. Couldnt find the video i posted it on.
Keep everything the same colour as the frame. I like the utility/no frills look of the beige. #militaryminibike #desertcamobeige
Try SNUS instead of dip! It’s pasteurized and no spitting. Goes in up lip and getting popular.
Gunmetal grey with black wheel hubs and the light black as well and make a new torque converter cover have that gunmetal grey with black and red red beard garage logo.
Flat black with red and blue pinstripes.
Cool shit
BLACK, Just the motor, leave the Camo.Great video Thanks brother. God Bless.
Where did y’all get the exhaust for that bike?
Get some 50:1 premis gas cans, take the lables off, fill them with 100% gas and strap them on the bike for extra fuel. It would be cheaper than any other gas cans you get offline.
Black n blue
cool!
The master link falls off because the at high RPM the chain can swing side to side and the lip of the chain tensioner can unclip it.
Hey RBG I have a question why do you use 1 inch spacers. I have the same bike threw a 212 and when I take off the motor vibrates a lot. Any suggestions bud.
Hopefully you can see this comment because I need some help; I have a Canadian powerfist engine with an electric start I got for dirt cheap but I’m struggling on how to start the engine with the battery; the cable starts to smoke on the battery when I turn the engine on? Are the cable clamps to small?
On my mini bike those back jack shaft gears I’ve got swapped and I’ll tell u I haul ass. My motor is also built for more power but yeah
Mine also came with no clip on master link. Ran it that way for several hours before realizing
Does anybody know if the triple tree mounts on this bike are aluminum or steel
Nice minis bro! Do you have any videos on replacing the ignition coil in a Coleman CT200U-Ex? I believe my exhaust ran too close to the plastic plug peice that connects to the spark plug, got brittle and broke. Any suggetsions would be greatly appreciated.
What did you get out of the 72T sprocket on the rear.
Good build there.. i had a baja mini very much like the coleman. Wish I hadnt sold it at the petit jean mtn swap meet now.. but tripled my money..guy really wanted it so he didnt have to walk the whole swap meet area up there. Should have just rented it to him prolly.. what do you think of stretching the frame a little bit.. just a lil more wheel base? Raise the fork tower area up some maybe.. no chopper type thing though just longer like the Rokon bikes.. Im not a small man either.. my knees have no room on these.. i have other bikes.. yamaha zuma and my 83 honda passport kinda a tossup.. but i still like this mini bikes.. they are just fun.. make ya fell like a kid again Maybe is why they appeal so much.
Hey Gregg. Think I would paint that bike, the same as the outdoors. Engine, a little tan and black then frame olive drab green. Just saying.
Yea I seen that kit you are talking about was hoping that it could be adjusted and didn't think that gps would sell that kit without a couple jets if may need them let me know I live in central Alabama not high altitude and Shirley if somebody is buying a Mikuni they probably already have a header just would like tosolve it because I can see it would be freaking awesome with a powerful motor in that carburetor with the pre-filter when I throttle it up it will actually suck it in LOL
Hey buddy. Can you help me by telling me wish cable is positive and negative on the headlight? There are two color, brown with white line and the green. Thank you!!
Where you able to connect your Coleman headlight to the TC motor?
great video as usual! and just a suggestion to consider: I think you could make your videos more watchable if you incorporated time lapse style video while your working. it takes longer to film, but most people find it more entertaining to watch which would increase you watch time. just a consideration tough, keep up the great work!
I use to do that and I stopped because I put enough in so you get the idea of what I did in the parts I cut
Ok Redbeard need a little help, I want to go to a 60 tooth sprocket and eBay amazon sources say they do not fit the ct200u-ex bikes, so what’s the best source? Thanks
Have you ever considered doing a hydrographics water transfer to selected parts? Fenders, tank, flywheel cover.
+dtalon92 I actually know a guy close that does it I may check into it.
What do you think about those duromax engines? I need to get us one of them mikuni carbs to play with.
+FireAndGasoline I'm not sure yet. Seems like no matter what I do I can't get it to really rev out.
Red Beard's Garage thats odd. Have you tried it with the original carburetor to see how it ran?
It's playful looking cutiepies just as is. But, if it's already camo, pick any of the camo colors. Maybe paint each part of the frame one of the three camo colors. It would be 3d like. Cool
Frame=Powder Coat Black
Fenders=Yellow/black metal
flake
Toolbox=Yellow/black metal
flake
Wheels=Yellow powder coat
Engine=Black/yellow metal
flake
What size predortor motor could you fit on one of the bikes
What muffler and air filter u got in it and rear sprocket?
And then paint the frame red with grey or black fenders plus the fuel tank of course
Paint it black with a blue stripe (the color of the engine) down the middle
Can u show how to change the light because I have one and I don't know. Would help a lot
The factory light bulb?
I bought that same bike lift today at harbor frieght. Got a heck of a deal.. 269.00 and 20% off of that. 230 something after tax.. gotta find my ticket here.. They accomdated me well because I been waiting on it. They had been out of stock for a couple of months.And I spend like 700 a month in there anyway.. mostly on stuff that I resell online..or try to sell anyway.. anyway I plan to build add on's that can be taken on or off. So I can use it for atvs and sideby sides. And still take them off for motorcycles... and maybe put a wide pipe base attachment at the floor on one end so it doesnt try to turn over with atvs on it.. my shop is 36 × 60 and a much bigger mess than yours.. cant keep it neat.. to many project left overs and to much stuff I have just in case I need it.. all in the way in there.. have a collector truck stored on the lift and one stored underneath it.. need more space.. but im a little older I think.. Im 45 and things acculate over the years.
how long is the chain on this thing i just broke mine first time i road her
Hey Red Beard, I added electric start to my Predator 212 4000w generator. I'm not sure if you know how and what parts to do it with, as I haven't found anyone explaining the process it posting videos. What I ended up with, was a 7hp Kohler (Honda clone) ringed flywheel with the Honda GX200 starter and key switch kit. Because my generator already had a 12 volt 8.3A outlet, I just tapped it to charge the battery. The key switch has a diode on the brown wire, to prevent battery drain. I have pictures, if you'd like to see. I still need to get a battery holder, but I made a temporary one in the meantime.
Hydro dip the engine components to match the camo.
Winner
Bryan Fortner drrrrrrrrrrrrrrrrrrdddddddddddd re ddddddddssd sd adds ddddsd
Thinking of getting one of these to get around in the deer lease ... I dont have 10k for a side by side
Can a hydraulic disc brake be installed on this bike
When did you install the TC on the engine? Any outlook yet on a TC kit that will bolt right on the Coleman? Thanks for all the great info...
Still waiting to get ours. It takes time to bring something to market.
How do I connect my coleman headlight to the TC motor?
Sounded like u possibly had sinus issues. If so I hope you feel better. I think u should go with a vintage army color theme with flat olive green as the primary color and flat black as the secondary or accent color. Awesome video btw!👍
+ken baker yeah had some jacked up sinuses during this.
i don't think the pulse pump was necessary because the fuel inlet on the carb is lower than the bottom of the tank
Make a swing arm for the rear moving the tire back 12" and put a suspension on it similar to a dirt bike. Metallic blue paint
+Silent Death I have been thinking about that
gloss black frame, matte black fake tank and fenders.
Hi I'm a big fan of your Channel I was wondering if you can help me out how do you know the size of a motor on a mini bike my friend just gave me one. Im trying to fix it it has a little bit of water I'm sorry rust in the motor what do you recommend
Hi sir wanna know what size your engine mount spacers tube sir?
By doing the below. You'll have a ton of space for a battery box and a tool holder
Great channel. Just picked up the CTU 200 ex and found your channel. I ordered the performance package from gopowersports and got the discount using redbeard in check out.
My question is do you have any videos on LED light conversion or ad on?
No but we will soon. Im about to do some more stuff to this bike soon
My bike ct200u-ex when it run 3min it take of and motor start racking any one know why
Yea the screw on bottom of bowl?
Camo camo camo
Like watching you man. My question is are you glad you got the coleman CT200U - EX ? I mean would you have rather brand of mini bike. Do you think this one is the most adjustable, workable, fixable..... worth the money ?
+Donald Bailey I like it a lot. The trail master bike is my favorite. It has rear suspension
Hey red beard what should I get first a torque converter or performance parts for my baja
Joey Ornelas torque converter
+Joey Ornelas torque converter for sure
I just purchased a two seater Manco magnum go kart frame would you recommend the Duramax or the predator 8 HP
+R Tabor I would stick with the Predator line of engines to be honest
A good color for camo would be hunter Orange And maybe some Orange accents Here and there
Will a duromax xp18hp fit in a Massimo MB200?
Hey i just bought a mini bike i want to upgrade it a little other than the throttle screw what do you recommend
go power sports performance kit and remove the governor with 18lb valve springs
hey anybody know why the discount code is not working?
Paint it red for red beards garage
Why did you change out the engine, electric start? IMO you should have tried it with the 72 tooth sprocket first. You could easily fab an adaptor to mount the original tank. I made one to adapt the Coleman tank to an old Greyhound and I'm not good with fab work.
very nice job, got a company that your brother works at that makes those gas tanks?
I work as a go kart mechanic, & I realise there is a good chance you have already done this, but have you tried changing the setting on the round-slide on the inside of the mikuni? There is a small surclip in there that you can adjust by moving it's position up or down slightly, which can help run the carb slightly richer or leaner. Changing the jet is a sure fire way of changing it to run richer or leaner, but you have to buy the jets for it, so it may be worth trying to adjust the setting on the carb slide as a free way of fine tuning the air/fuel mixture. It may or may not work for you, but it helped me fine tune my heavily modified GX200 (kicking out about 18hp) which was running a little bit lean before. Generally speaking, the lower to the bottom of the slide the surclip is placed, the richer it should run.
We actually moved the clip up on notch and are going to try to do another. It has a little bit too big of jets in it at the moment. Think it might be flooding itself out on topend
Would this work with the BT200X?
Hey since mentioned that your brother makes tanks I would possibly be interested in buy one from him to fit a 212 predator
I wish i had A electric start On my bike
Painted olive green it would match
Do you think a dewalt milwaukee battery will start a 212
Yes use a 18v and it should work great
How fast does this go with the torque converter?
If the governor is still on it probably around 35mph
As far as colors go, I'd paint the engine and frame the same desert tan, with green and brown camo like the fenders and tank/storage compartment! With aluminum handlebars. Then all controls and switches in black. Then as far as the gas tank? I would remove the only on the engine. Then try to add one inside that compartment! Or remove that also and find a nice aluminum tank! Does that new engine have a governor? Is there s V Twin built to put in one? That would give more tq and hp, while sounding great!
+K. R. V. To do a v twin you would about have to build your own frame
Red Beard's Garage checkout carsandcameras video where they put a 670 on it I do believe with the same frame
Can you put up a link for the vacuum pump you're using for the fuel thanks
+Jo Fa I will in the morning sir
Reds Beard Garage.
keep the camo, motor black, and all accent black. Imo.
Other than the tank, what's the difference from the Predators?
+King Ave Garage nothing really
So the usually performance parts fit them other than internals?
Does anybody know how to put an electric start on a 79 cc preditor
If you find out lmk
Paint the motor grey with a go power sports sticker
Ay red neared do u have any 21 inch dirt or street bike tires I can buy ?
I don't think i do man