How To Regen A Kioti Tractor & More - DPF Explained
Vložit
- čas přidán 19. 02. 2020
- Today Morgen Kirby from our Service Department goes through the ins and outs of the Kioti Regen System and how it works. If you own or plan to own a Kioti tractor, this video can certainly give you all the info you need in order to keep your tractor running in tip top shape. In this video Morgen goes thru how to do a regen in a Kioti tractor and also goes over fuel tips and additives and much more!
Don't forget to subscribe, Like the video and Leave a comment below!
check out our website: www.orchardhillsales.net/
Check our Facebook Page: / orchardhillfarmequipment
Phone# 413-253-5456
Email: info@orchardhillsales.com
Orchard Hill Farm Equipment
1210 Federal Street
Belchertown, MA 01007 - Auta a dopravní prostředky
Morgen you have explained the DPF topic very well.
Thank you for sharing this info.
@ 3:15 - Good advice!
Running a DK6010SE (and LOVE IT!)
Reason I had the "Puff of smoke with thermometer" was I had been idling the tractor to warm it up for a long time as I filled the diesel...
I was clearing some light snow, and wasn't planning on running it for a while, but I decided to run up the RPM's to 2000-2500, cleared the driveway and then pushed some piles back to kill to birds with one stone.
By the time I was stopped at the garage door to take a garbage can down to the street, had thrown on the parking break, I noticed the "puff of smoke with thermometer" light disappeared - AWESOME!
Thanks for making this video to help reassure what I assumed was happening.
P.S. You can definitely smell that recirc happening! I suppose this makes sense given the stainless particulate case was probably red / purple hot!
Finally!!! A Regen video!!! Thanks!!!
Great explanation 👍 hope to see more 👍
Great info. I thought my nx4510 had a problem. Thanks for helping figure out the issue
Thank you ! Well explain...
Great info !!
Could you do a video showing how to remove the DPF system? 😎 Thanks!
Good info...the ck3510 book doesn't explain regen very well
My CK4010 regens approximately every 32 hours, and I always run it at 2300rpm during regen. Engine rpm's are your friend during a regeneration.
My NX5010 regens approximately every 32 hours as well.
I wish I could get 32 hours between regens the longest it's gone was when I first got it, went 42 hrs and has been down hill ever since along with a list of other things and my dealership seems to be useless they have taken it back to the shop 6 times and not fixed it yet and they have had it now for 2 wks and have no idea when I will get it back and I doubt it will be fixed,we bought new so we wouldn't have the headache of buying used what a mistake
@@elwinsmead5691 Wow, sorry to hear these issues.
Try a different dealership for warranty and repair work. Its not the length of time for repairs thats a concern here, but the number of times you keep bring it back. Overall, most tractor dealers try to provide good service, but unfortunately some dealers just struggle to make competent repairs.
A decrease in time between regens means your not running at high enough RPM's or your injectors or not performing properly. And just imagine how serious it becomes if you have both issues at same time.
@@martinrademakers762 I have tried a different dealership asked if I bought it from them and I said no and I got well take it back where you bought it. I run this tractor between 2000 & 2300 rpm most of the work I do involves the bucket and my backhoe but this tractor will regen and I will let it run its course and I have had it regen 20 min's later been doing this since new. I get about 4-5 hrs most times between regens and my tractor has no power when it does regen
I get about 25 hours between regens, just over 52 hours now. Trying a new higher grade Diesel fuel from Shell, we’ll see if it makes a difference.
Thanks for the info on the regen cycles. I noticed this tractor had wide turf tires on it. Is it possible to get wide Goodyear / Titan Low Sidewall (LSW)Tires and rims on the larger Kioti Tractors...?
I have a 2022 CK3510SE does Kioti make spark arrestors for their tractor?
TM AG Tuning is pretty much the only company that can do a delete on these. It requires a bench tune, the ECU to be cracked open and read from contact points on the PCB itself.
como se regenera el dpf del modelo kioti RX 8030 ya que no tiene boton de regeneracion se lo agradeceria
Does anybody make a delete kit for the dpf system
Just to make sure. The hour meter still goes up as you regen right?
Yes your hour meter should increase anytime the tractor is running.
Does serviceability have a place in tractor purchase?
Probably should
I have a tier 5 and experienced two regens so far. I did the parked regens but don’t think it more than 15 minutes.
When regaining, does engine hours still go up?
@@kevinnguyen9430 yes
What year? What model?
@@davehudson4607 it’s a CK 3510 2020 year.
@@mr.redneck2715 Thanks Don, how often does your machine need to regenerate? I have the CK4010, a 2020, only two regen cycles so far, a little over 50 hours.
Lol - 12:09 - "use a propane torch to warm up your fuel filter"! That sounds like a Darwin Award in the making
More practical than Just Add Beer!
Yeeeeeah I wouldn’t use a torch anywhere near fuel lines and electronics. Better to use a hair dryer and bring the unit inside to a controlled temp to help.
Can you delete the Dpf
Is it safe to do a parked regen in a field?
Its risky, I lit a match off my dpf cycle. Dry tall grass won't take much, saw a guy put a flex pipe up and over the brush guard.
I’m talking about short grass that’s been cut that it don’t reach the tire rim
Regen is stupidest thing government ever came up with
Wasting diesel for 40 minutes!..how efficient
I have a similar Kubota, be aware the tiny diesels with the regen are pieces of shit. Manufacturer does not matter.
My Kiote tractor was reGening every 40 hours but but now every 7 hours, what’s up?
Its definitely got an issue. I would contact your dealer. Could be a bad fuel injector. We have seen a few of those cause this issue
During a regen, tractor does not loose any engine power
lose not loose
I heard the quote “you’ll never have an issue” cmon man…
How can a DPF be over 100% full? Asking for a friend…
Daedong …. The metric system. 🤣
I wish there was a straight to point regen video for ck 3510, you need to say neutral atleast 15 more times!!!!!!!!!!!!!
To unthaw is to freeze.
Sounds kind of screwy kioti will not let end users read the codes off the tractor
Little Trucker Kennel unfortunately most all equipment manufactures do the same thing. As the programs and codes are total different from the car industry.
You can read the codes, but knowing what each code means varies from tractor manufacturer to manufacturer. Just like Ford, GM and Toyota all have proprietary codes.
@@martinrademakers762 No kidding it's kind of screwy that you can't get and open code to find that when a wire has a loose connection to a sensor 1/2 to bring it all the way to the dealer costing time and money just because a wire is lose
I agree. My Kioti zero turn says ERROR 44 when I try to engage the PTO. No one can even tell me what that means. It's brand new, haven't even gotten to mow my lawn yet and now I can't 😡
If the code reader from AutoZone will not give the correct codes off of the code reader why doesn't coyote sell a code reader for the end-user to pull the codes? After all we paid tens of thousands of dollars for the tractor but you're not going to let us read the codes to find out what's wrong with the tractor? Are you really selling us the tractor or just renting the tractor. When my warranty runs out if I cannot read the codes to find out what's wrong with the tractor I plan on hiring an attorney to sue your ass because I paid over $25,000 for a tractor and you're not going to let me read my own codes? Sounds like a class action lawsuit to me
When tractor is all paid for and off warrantee, rip the blanking tear 4 crap OFF!!!!!!!!!!
Really! Sliding the tires on the Kioti Not the most safe thing to do. Your product is good but I use Hot Shot Secret in all my diesel vehicles. It improves performance and mileage. They even have real people that answer the phone if you have questions. Turn your hat around and look professional otherwise informative
Your little speed and slide , wouldn’t buy anything from you . If you don’t care for your equipment wouldn’t let you touch mine!
Just call TM AG Tuning and delete all that bullshit.
Looked them up they are Canadian…. Would love to have someone that could fix my Kubota
@@jayprettyman2634doesnt matter, TM AG Tuning can do it
Get to the point. I've skipped to 4 minutes, sitting on my tractor, and no how-to.