Holds true for BOTH sides - both mirror rods on EACH side. They are BOTH - LEFT HAND (meaning the opposite - clockwise to loosen) and first loosen that first top nut(s) - which are also left hand thread (both sides) in order to be able to unscrew the mirror rod. Yes, below that the riser adapter and mounts are right hand thread (clockwise to tighten and counterclockwise to loosen)...
Thanks. Just took my new Trail 125 out for the first time and could not see directly behind me. Saw FB recommendations on the Doubletakes but agree, too bulky, and not sure how much additional width i gain. Ill look into the others you suggested. Thanks for taking time to do this comparison
I just got back from an 1100 miles adventure ride on Little Red Donkey. These mirrors are excellent! Never came loose, little vibration AND allowed me unobstructed rear view around my shoulders.
Hard to find the right mirrors for large people. The last pair you tried are fine but extends way past the handlebar ends. Makes lane splitting or weaving through heavy traffic hard. They will take a beating in the outback we well. Motorcycle makers don't take the locations of the mirror mount points seriously. Every motorcycle I own has the right and left mirror mounts in different locations on the handlebars. The mirrors are exactly the same but the mount points aren't.
Are these universal I have a 1984 CT 110. And one of my mirrors broke would this work ? I'm just curious if all the ball patterns are the same on all of the Honda trail 90s 110 to 125s Thank you very much
Wooden box! Love it. Did you make it? Can you show it in more detail? I'm not a wood worker so I would like to see how the corner and bottom joins are done. Thanks.
they are on the way cant wait ! ( $29,99 on amazon at the time of this msg )
Holds true for BOTH sides - both mirror rods on EACH side. They are BOTH - LEFT HAND (meaning the opposite - clockwise to loosen) and first loosen that first top nut(s) - which are also left hand thread (both sides) in order to be able to unscrew the mirror rod. Yes, below that the riser adapter and mounts are right hand thread (clockwise to tighten and counterclockwise to loosen)...
That's awesome! I love your channel for insightful howto mods...Thanks for the info...I'm returning the Doubletake
Great video, very insightful
Great mirror options. Thanks for showing the comparisons.
Thanks. Just took my new Trail 125 out for the first time and could not see directly behind me. Saw FB recommendations on the Doubletakes but agree, too bulky, and not sure how much additional width i gain. Ill look into the others you suggested. Thanks for taking time to do this comparison
Yep, I like the last mirror alot better, had seen them on o the CT's an in the black is what I want on mine.
I just got back from an 1100 miles adventure ride on Little Red Donkey. These mirrors are excellent! Never came loose, little vibration AND allowed me unobstructed rear view around my shoulders.
@@motorcyleadventuringwithmi2778 did you get any video of that ride?
Hard to find the right mirrors for large people. The last pair you tried are fine but extends way past the handlebar ends. Makes lane splitting or weaving through heavy traffic hard. They will take a beating in the outback we well. Motorcycle makers don't take the locations of the mirror mount points seriously. Every motorcycle I own has the right and left mirror mounts in different locations on the handlebars. The mirrors are exactly the same but the mount points aren't.
Good Info, thanks.
For the first risers extenders do I order 10mm or 8mm? Thanks and good video
Did you say that was a 14 mm ?? Didn't see anything in the manuel regarding mirrors.
Are these universal I have a 1984 CT 110.
And one of my mirrors broke would this work ?
I'm just curious if all the ball patterns are the same on all of the Honda trail 90s 110 to 125s
Thank you very much
Is there a link to these mirrors?
What size allen wrench is needed for tightening the 1st extenders u showed.
Are you still enjoying the bike?
Link Please!!
👍
www.amazon.com/gp/product/B01HJZUQDY/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Wooden box! Love it. Did you make it? Can you show it in more detail? I'm not a wood worker so I would like to see how the corner and bottom joins are done. Thanks.