Not sure if you still have it but it definitely sounds mean as hell. Just checking out similar set ups as I got my eyes set on 2017 with barely any mileage. Dudes already done some work , BBK LT Headers, Borla S Type, JLT Cold air intake & Oil separator, tuned by a respected Racing. Looking forward to checking it, there are just so many options or combinations of various brands making quality aftermarket goodies that make these things sound and tear up the road for a sweet deal.
No to much , it’s more of a nice deep sound On low RPM’s , I used to have 97 GT with h pipe and set of flowmasters and it really droned on low RPM’s . This is not even close to that.
Lund racing sent me 4 tunes 93 octane E 85 E 85 R and FLEX TUNE this video was on 93 octane tune But I like E85 or E85 R tune I think car sounds better on E85 It doesn’t sounds as raspy as 93 tune
Corsa extremes are loud with oem headers and cats , with catless LTH it's loud to the point it's not enjoyable any more in my opinion . If you want to make it quieter you have to install set of resonators it will help a lot
Atak is loud already with stock headers If you want to update your headers it is going to Be very loud, just keep that in mind before you Spend money on set of headers. This set up Would be to loud for me but this is personal preference. I would install borla resonator To quiet it down a bit .
It’s loud for the first 10 - 15 seconds then it gets “quiet” I like it , but with long tubes I wouldn’t go with BORLA ATAK or in your case CORSA EXTREME. I think ATAK or EXTREME is good for stock headers but it’s too loud for long tubes in my opinion. You can still fix it with set of resonators .
part# 1151H411 it's heders with off-road mid pipe section .part# 11513200 it's just catted mid pipe sectionmid pipe section can be easily swap with catted or not catted section.
This vid is 4yrs old and this sound today is still gold! No rasp, clean, deep, gnarly, respect! 🍻
one of the best sounding coyote dude
I got a 2015 GT at the beginning of the year and it has a Borla s-type, this is the exact sound I want so def getting some Kooks 😮💨😮💨😮💨
Beautiful sound
Pufff !! Poderoso 💣💣💪🏻💪🏻 🔥 that sound is scary!! Beautiful toy!🙏🏻
That is exactly what I want. I ready have Borla S Type, now I need Catless long tube headers. Sounds really good! Congratulations.
dont go catless, you wont pass emissions
unless its for track and drag strip only. If your know the laws, you wint get a ticket
I ready got LTH with high flow cats. Thanks
Was undecided on what kind of hearders to get but this video made my mind up lol
That sounds grrrreat!!!
So Sweet!! 👍😎
Cannot wait to put this setup on my 2016
You will like it
It’s sounds even better on e85
Not sure if you still have it but it definitely sounds mean as hell. Just checking out similar set ups as I got my eyes set on 2017 with barely any mileage. Dudes already done some work , BBK LT Headers, Borla S Type, JLT Cold air intake & Oil separator, tuned by a respected Racing.
Looking forward to checking it, there are just so many options or combinations of various brands making quality aftermarket goodies that make these things sound and tear up the road for a sweet deal.
🔥🔥🔥🔥🔥
Catted or catless? Sounds amazing brother
Are the Kooks catted or catless?
F$&k that sounds badass
So i cats or no cats in this vid? Cause i just found my new fav exhaust
yo are these catted headers or?
catted x pipe ?
is this cat less? or with cats
Amazing sounding GT, what’s your wheel fitment? It looks perfect !
Project 6GR wheels 20x10 front with nitto 275/35r20
20x11 rear with nitto 305/35r20
These catted or not ?
We know this isn't in NY lol. That guy would be in jail ;) Love it man !!
Like me he probably lives in the free world.
@@charleshenson4183 soon no such thing as free world if the Biden regime heading towards electrification and controlling your speed limit😂
@@Oliver-ft2fq
It sure isn't looking good.
TRUMP 2024 MAGA
Any drone with this set up? I have the borla s type with an x pip now. Looking to buy some long tubes soon.
No to much , it’s more of a nice deep sound
On low RPM’s , I used to have 97 GT with h pipe and set of flowmasters and it really droned on low RPM’s . This is not even close to that.
How much faster did headers make the car feel? I have a 17 and am trying to decide if theyre worth it
Scott Leighton they are worth it just put some on my 18 and you can feel the acceleration and you can really make the car roar at will
It reduces your 0-60 down by 2 seconds
Sounds catted
Hey bro have you gone e85 ? And if so what's your set up to it? If you dont mind me asking . I just got my 17gt and wasn't sure
Lund racing sent me 4 tunes
93 octane
E 85
E 85 R
and FLEX TUNE
this video was on 93 octane tune
But I like E85 or E85 R tune
I think car sounds better on E85
It doesn’t sounds as raspy as 93 tune
@@tomannmatt awesome bro thanks . And stupid question but that was an online order right?
@@CoyoteDAworld tunes were send via email
How was this for daily driving? Currently have catless lth with corsa extremes and it is way to loud
Corsa extremes are loud with oem headers and cats , with catless LTH it's loud to the point it's not enjoyable any more in my opinion . If you want to make it
quieter you have to install set of resonators it will help a lot
Any drone with this setup?
just a little bit but really it's not bad
I have borla atak full exhaust should I get the long tube headers
Atak is loud already with stock headers
If you want to update your headers it is going to
Be very loud, just keep that in mind before you
Spend money on set of headers. This set up
Would be to loud for me but this is personal preference. I would install borla resonator
To quiet it down a bit .
Love when people don’t put the rear spoiler on these… such a clean design! 👌
How is the damn cold start? I currently have corsa extreme with texas speed long tube headers and oh boy is so loud neighbors will hang me lol
It’s loud for the first 10 - 15 seconds then it gets “quiet” I like it , but with long tubes I wouldn’t go with BORLA ATAK or in your case CORSA EXTREME. I think ATAK or EXTREME is good for stock headers but it’s too loud for long tubes in my opinion. You can still fix it with set of resonators .
@@tomannmatthe can go extreme or atak if he goes twin turbo too. An S type would sound very quiet with turbos.
I have 2.5 inch borla s type can install kooks long tube headers?
yes you can connect it to kooks headers with out buying any additional parts
@@tomaszgalej6918 thanks
And are the 1 7/8's or 1 3/4's inch headers?
On this video 1 7/8’s Kooks part# 1151H411
( for track days ) I’m using catted pipe for daily driving Kooks part# 11513200
@@tomannmatt thanks for the reply man. And I love your exhaust setup. It sounds ferocious👍
I see the headers for the first part number but, the other one I do not see that part number for the other headers.
part# 1151H411 it's heders with off-road mid pipe section .part# 11513200 it's just catted mid pipe sectionmid pipe section can be easily swap with catted or not catted section.
@@tomannmatt So you saying you have the same headers but, you just swap out the catted to catless?
kooks x pipe or kept the Borla X pipe??
Borla x
@@tomannmatt so have the full Borla cutback just with headers??
@@gilbergifarraguerri6319 Full exhaust from cylinder heads to exhaust tips
Coyote 5.0 catted x pipe or off road
What’s name of those rims
Proiect 6GR wheels 20x10 front with nitto 275/35r20 20×11 rear with nitto 305/3520
What's the rims
Project 6GR wheels
20x10 front with nitto 275/35R20
20x11 rear with nitto 305/35R20
@@tomannmatt 305 rears at jeez nice bro nice
🔥🔥🔥