DF Goblin vs Weatherly guard rail

Sdílet
Vložit
  • čas přidán 10. 06. 2024
  • Skipped the frame off the ground at the uphill crest entering turn 3. The shock locked the fronts up and just sent the car straight to the guard rail.
  • Auta a dopravní prostředky

Komentáře • 16

  • @carlmollnowii340
    @carlmollnowii340 Před 28 dny +1

    That's a hard one to watch. Glad your ok. Fortunately, it sounds like you saved it from extensive damage and will be repaired easily.

  • @scottlaird497
    @scottlaird497 Před 7 dny +1

    shit happens, glad your ok dude

  • @LordHolley
    @LordHolley Před měsícem +2

    Well, that sucks. I'm glad it was minor. You can hear the bottom out, then go into the rail.

  • @wingman703
    @wingman703 Před měsícem +3

    Your front wings need hazard pay 😂

  • @RobF3024
    @RobF3024 Před měsícem +1

    Damn that sucks! Hopefully the damage isnt too bad.

  • @bspiritracing
    @bspiritracing Před měsícem +1

    shiiiit

  • @davids1043
    @davids1043 Před měsícem +1

    I can’t tell what happened. Did your body weight transfer after you landed cause over breaking thus a loss of steering?

    • @Magic_Marc
      @Magic_Marc Před měsícem

      My goblin front end gets so light you just can’t control it after a bump.

    • @Magic_Marc
      @Magic_Marc Před měsícem +1

      Damn sorry man. Your goblin is such a beast. Hope nothing structural.

    • @justinreedracing6213
      @justinreedracing6213  Před měsícem +4

      Frame skipped off the pavement causing a lock up. Once tires lock steering does nothing

  • @stevenwork95
    @stevenwork95 Před měsícem

    Damm going to be needing some left side control arms. Didn't look like you got hurt, so that's good. Tires cold or to worn?

    • @justinreedracing6213
      @justinreedracing6213  Před měsícem +2

      Frame skipped off the pavement

    • @stevenwork95
      @stevenwork95 Před měsícem

      @@justinreedracing6213 Got ya, tough luck man, it didn't rip the control arm mounts off when you hit the guardrail did it?

    • @justinreedracing6213
      @justinreedracing6213  Před měsícem +1

      @@stevenwork95 surprisingly no, it bent the billet control arm mounts for the spindle and the rear spindle upright and strut

  • @Frog_Gamer2015
    @Frog_Gamer2015 Před měsícem

    Skill issue