Salut David . Est ce que mon décompresseur automatique peut m empêcher d avoir de la compression , celui sur l arbre a came , le décompresseur automatique.merci ,sam
I have a husqvarna sm 610 from 200 and the problem is that i cant realy accelerate an the rmp doesnt go high .... i habe a dellorto phm 40 sd but i think i need a ms and i dont have a accelerator pump ... could you help me ?
Hi Tom, i recomend you to rebuild the carburator you already have, buying a kit which include joints, jets and filters. Is easy to find it on amazon or ebay. If you do the rebuild and keeps the bad working, try to get a second hand carburator phm 40 ms, this types of carburators dont must be too spensive. I hope you solve your problem with the first option. Good luck💪🏽
Hi there. I got TC 610. With PM40. After remowing air box i saw that carburator is covered (inside) with Black burned staff. Trobkedhooting poor start. Any help is appritated. (Havent cleaned the carby yet)
Hi, In my opinion you must clean the carb and remove the old air filter, because that could be the problem, a deteriorated air filter. But i never had that problem Good luck👍🏼
Ciao potresti fare un video come è dove ricollegare i tubicini della benzina grz
Salut David . Est ce que mon décompresseur automatique peut m empêcher d avoir de la compression , celui sur l arbre a came , le décompresseur automatique.merci ,sam
Hola cuál es el nivel de ese carburador? No logro darle la altura a los flotantes
Gracias y muy buen video
I have a husqvarna sm 610 from 200 and the problem is that i cant realy accelerate an the rmp doesnt go high .... i habe a dellorto phm 40 sd but i think i need a ms and i dont have a accelerator pump ... could you help me ?
Hi Tom, i recomend you to rebuild the carburator you already have, buying a kit which include joints, jets and filters. Is easy to find it on amazon or ebay.
If you do the rebuild and keeps the bad working, try to get a second hand carburator phm 40 ms, this types of carburators dont must be too spensive.
I hope you solve your problem with the first option.
Good luck💪🏽
Hi there. I got TC 610. With PM40. After remowing air box i saw that carburator is covered (inside) with Black burned staff. Trobkedhooting poor start. Any help is appritated. (Havent cleaned the carby yet)
Hi,
In my opinion you must clean the carb and remove the old air filter, because that could be the problem, a deteriorated air filter. But i never had that problem
Good luck👍🏼
@@DavidMoledoMartinez thank you
What are the jet sizes you used?
Hello, i used the fabric sices:
-Main jet: 175
-Starting jet: 60
-Idle jet: 62
Hola. Qué líquido le echaste a la cubeta de ultrasonidos?
Gasoil, aunque también puede usarse agua destilada
@@DavidMoledoMartinez gracias
Hello