Video není dostupné.
Omlouváme se.
Hornby's new TT120 Class 50: reviewing the TXS model,
Vložit
- čas přidán 6. 06. 2024
- Just released a few weeks ago, have a look at Hornby's new TT120 scale Class 50 - being stress tested in cruel and unusual ways!
If you'd like to pick up one of the superb models, affiliate links (from which I earn small commission) are below:
TT3014M BR, Class 50, Co-Co, 50040, 'Leviathan' - Era 7
prf.hn/l/NdnlAje
TT3014TXSM BR, Class 50, Co-Co, 50040, 'Leviathan' - Era 7 (Sound Fitted)
prf.hn/l/vwxo0RJ
TT3013M BR, Class 50, Co-Co, 50007, 'Sir Edward Elgar' - Era 8
prf.hn/l/5541aEm
TT3013TXSM BR, Class 50, Co-Co, 50007, 'Sir Edward Elgar' - Era 8 (Sound Fitted)
prf.hn/l/W4VZn92
TT3015M GBRf, Class 50, Co-Co, 50049 'Defiance' - Era 11
prf.hn/l/3PzRAvE
Lovely. Great detailing and just a wonderful model.
It's a very high quality model. That certainly comes through in using it.
A very thorough review, you certainly put it through its paces.
Thanks Trevor. Appreciate the comment
Interesting that you mentioned the box opening and tending to rip or tear the new box. I have found a steel rule sliding in one end using the flat end of the rule to push the box open from the inside of the other end. Not my idea but works well to maintain the integrity of the box. I hope that makes sense . Enjoying the videos in the last few days cheers.
Thanks Lindsay - Usually I'm just too eager to get to the inside.
Impressive climbing test 👌
Yes, it was (ahem) pulling like a train.... (sorry, couldn't resist!)
Another great video, with great testing
Glad you liked it! Its a cracking loco
Great review. I really love this loco :)
Glad you enjoyed it
I received my TT120 BR blue Class 50 with sound this week - one word to describe the loco: WOW!
No argument from me!
Sorry just looked at your reply and seen what you set them to thank you
No bother. Thanks Ian
Looks and sounds great. Leviathan is the one I went with and I'm not disappointed.
Totally agree
Hi again Mac having problems with everything now it seem all trains not running right on track some just wheel spinning and not moving or going slow then a bit faster and stopping would you have any suggestions what could wrong sorry to bother you
Hi Ian. That's not good! Better than relying on CZcams comments, if you raise a post on Hornby's HM7k forum, then myself and others (far better experienced) can try and help. If you detail exactly what's wrong, how many locos are affected, what the symptoms are etc, I am sure someone there will get you up and running.
Hi I noticed you said you messed around with the cv’s a bit I have the two of them and at speed 55 to me seem a little slow now I know nothing about the cv’s thing but when you say playing with them to get it running right I’m not sure but I think they should be a little bit better than they are or is it me also which cv’s should I look to adjust if you could help thank you
Yes. If you go into the app, then select the loco (if you have more than one). Then select "loco settings" (near the top right), then "adv CV editor" (again, top right). Hit the refresh cvs button (swirling arrow, top right yet again!) and scroll down to the one marked as vmid - which I assume means what voltage the app considers 50% on the speed slider. In mine this was set to 72.
Given that this is out of a possible max of 255, this explains why 50% on the app speed slider is nowhere near 50% speed. I changed mine to 150 for now, though I may reduce it slightly to around 120-130. Once done, exit this adjuster, and re-sync the CVs once more (top right swirling arrow).
Then power cycle the loco.
For me this instantly resolved the issue.
Hope that helps - but please be aware that this is only what worked for me! Let me know how you get on!
@@mactrains thank you for replying what did you set yours too .
Spoilt for videos today 👍
Hope you enjoyed it! Wanted to get out my appraisal of the 50 before it was stale news!