Nice guide began watching other videos while mine is being shipped to see how the install is. By far your video is the most detailed one step by step. Even when a step further to secure make sure that lip is snug!
Nice video…. Keep up the good work. I just wanted to take a moment to let you know about the 2 tabs on each end which appear to connect nowhere. They actually do, and should be used to further secure the pieces to the car. What is needed to be done is to gently bend those 2 tabs on each piece to a vertical position, so that the hole is up. Then you will see that you can attach them with push pins. If in the future, you need to remove the end pieces due to the 3M tape loosing adhesion, you can detach and re-install them if necessary. Those tabs will not break off when removing the push pins if you are careful. I hope this helps you and all those who watch your videos. Take care…
I bought a pair for my 2021 Honda accord sport sedan One side was a 1/4 too short The seller's first suggested that I use a heat gun to stretch it out That didn't work Thier next suggestion was to remove the oem side skirt and put on the yofers Any suggestions?
Sucks all this money for these kits and they dont even fit great you have to drill new holes and put better 3m tape and ext everything made in china smh im not putting any kits on mine would love to but unfortunately its snows a lot here and im not wasting money so snow can damage on my kits
Nice guide began watching other videos while mine is being shipped to see how the install is. By far your video is the most detailed one step by step. Even when a step further to secure make sure that lip is snug!
Yessir. Glad it helped.
Looks so clean, awesome work!!👏🏽👏🏽
Nice video…. Keep up the good work. I just wanted to take a moment to let you know about the 2 tabs on each end which appear to connect nowhere. They actually do, and should be used to further secure the pieces to the car. What is needed to be done is to gently bend those 2 tabs on each piece to a vertical position, so that the hole is up. Then you will see that you can attach them with push pins. If in the future, you need to remove the end pieces due to the 3M tape loosing adhesion, you can detach and re-install them if necessary. Those tabs will not break off when removing the push pins if you are careful. I hope this helps you and all those who watch your videos. Take care…
Appreciate the info.
The bending of those tabs is the info I needed! Hopefully they don’t break!
Looks amazing! ❤️
Bought that lip in blue 2 weeks ago can’t wait to install it!
Nice man. Good luck.
where do i buy
@@alextube819 bought mine on ebay
Can the mud guards be reinstalled front and back, after this installation By the way nice work! Looks great!
Love it man!
i didnt want to have to drill holes in the whip but shit hopefully its worth looking dope
I bought a pair for my 2021 Honda accord sport sedan One side was a 1/4 too short The seller's first suggested that I use a heat gun to stretch it out That didn't work Thier next suggestion was to remove the oem side skirt and put on the yofers Any suggestions?
Clean af
I want the sideskirts grey where u get them does it come in grey ?
Love the content
Can you send the link where u got it?
czcams.com/video/0ABrMNSLq_0/video.html
can you give me the link to the website where you bought it ?
Anyone know if this will fit a 21? Just got a 21 sport and I can’t find lips for it anywhere
Lovely
Do you have the link for where i can order this kit?
thanks so much for this got mine coming ..and i was like 3m holding the sides nahhh ..that screw u put was perfect !! hows it holding up now?
No issues.
@@slamdeencustoms6959 thank youuuu man ..real informative appreciate u
Do these increase aerodynamics or apply more downforce on the front wheels under hard acceleration?
Nah it jus look dope
wow . amazing
Where you get front lip from ??
The corner tab flips up to connect to the tab put the middle one doesnt on the side front piece
Bro what state you from I’m have to pull up for sum mods
Do you have links to these products?
Looks good, how close is the paint match
Looks off in the video
🙌🙌🔥
Clean rims . I’m looking into rims , what size are yours?
18x9.5 22 offset tire size 245/35
Where can I buy this kit?
Can i have the link to get this lips.?
did you orders yours from yofer or hirev or from ebay ? my fitment is so off i was just wondering if they all like that
eBay. Yofer brand
Link of the side skirt pls
Any link for this front lip?
Link to lip and skirts?
Nice I love the wheel fitment. I ordered Mines from hi rev and it fits like shit. Maybe it's a bad batch
Sorry to hear that. This brand Yofer is decent
Is necessary to put the two screws on the middle part to hold with it
No, but it’ll be more secure.
Nice vid. Now I wanna see how the hell you drive this
What those rims called ?
Hey I installed the same lip on my accord however, the end on the side lips stick out, was wondering how you got yours that flush?
The ends should hug the bumper
@@slamdeencustoms6959 did you put more double sided tape on it? I'm referring to the end that connects to the center by the middle black lip
@@MD-CincoCuatro do you have Instagram? To send me some pictures
@@slamdeencustoms6959 I don't but I can email them to you?
@@MD-CincoCuatro 5167879398
Are those 18 inch rims?
Yes. 18x9.5 22
Link for these?
nice but your suppose to bend those clips into place... they line up with the wholes once you bend them..
That was covered, thank you.
hope he got bags on that lol, he aint driving home if not
Who’s the owner
does this fit on the new 2021 model?
Not sure
No u gotta get the updated one u can get it on hi rev sports
Where did you order them from ?
www.toplineautoshop.com/custom-side-skirts/1335-2018-20-honda-accord-yofer-side-skirts.html
xgenauto.com/products/yofer-design-front-lip-splitter
@@slamdeencustoms6959 did you get the center piece black carbon fiber as well?
bro...share you r rim size n model...
32k sheesh
Why don't any of you post a link to the parts? smh
I can ask the customer. If it was my car I’d post it but I don’t know where he got it from.
Sucks all this money for these kits and they dont even fit great you have to drill new holes and put better 3m tape and ext everything made in china smh im not putting any kits on mine would love to but unfortunately its snows a lot here and im not wasting money so snow can damage on my kits