Fitting a Givi screen to a Honda VFR 800 Crossrunner

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • In this episode from Deano's Garage, I take a VFR 800 Givi screen, for a 2020 bike, and fit to a 2015 VFR800 X.

Komentáře • 14

  • @JEMCL
    @JEMCL Před 11 měsíci

    I found a screen extender (PUIG aliexpress copy) worked really well to get the wind above my head. Cheap fix at $30 shipped to my door.

    • @DeanAllen
      @DeanAllen  Před 11 měsíci

      Sounds very good, being as the Crossrunner's original screen is so poor perhaps you can share a link for others to find and try, to overcome the issue.
      Thanks......
      Dean

  • @bikefreak5787
    @bikefreak5787 Před 8 měsíci

    I have the 2017 model with adjustable screen. Doesn’t do me any good anyway. I’m only 175 cm high, but the wind make quite some noise still. If I bend over slightly it is all quiet. 🤔🇩🇰

  • @shiftyshamsk
    @shiftyshamsk Před rokem

    Just bought myself a Skidmarx taller screen £45 inc pp for my MK1 crossrunner.

    • @DeanAllen
      @DeanAllen  Před rokem

      Hope that is much better, £45 is cheap too.

  • @indy-biker-stevie
    @indy-biker-stevie Před 2 měsíci

    Hi Deano, I got a 2020 crossrunner last year & changed the stock screen for the givi touring screen, it makes a big difference compared to the stock screen,
    but I have ran into a problem with the 5mm rubber well nuts which hold the screen onto the mounting plates, two out of the four well nuts have started to perish
    & the screen was rattling, so it looks like the added weight on the givi screen over the stock screen is a problem.

  • @oliverlotus
    @oliverlotus Před rokem

    Hi Deano. I have a 1986 VFR750FG. I find your videos quite intesresting. Your steelie CBR series was great. Not sure about aftermarket oil filters though.

    • @DeanAllen
      @DeanAllen  Před rokem

      Thanks, not sure what you mean by aftermarket oil filters. HI-FLO are a decent filter. It's the regular oil changes with the correct type of oil that really counts. I personally have no issues with cheaper filters.
      Glad you got something out of the previous vids though.
      Thanks again, Deano.

  • @petergroome3287
    @petergroome3287 Před rokem

    My 2016 came with a givi, two words....bloody awful. Only solution I've found is to fit an aftermarket deflector to the original screen. A lot less buffering and noise.

    • @DeanAllen
      @DeanAllen  Před rokem

      Brilliant bike, just can't figure out why they never tested the screen, some came with adjustable ( about 50 mm + ) up or down.

  • @waynesorsby125
    @waynesorsby125 Před rokem

    Hi Deano. Do you happen to know if indicators are universally handed. A right front is available from a scrappers, but I need to replace the left. Is it a good hack?! Thanks!

  • @neil_woth5199
    @neil_woth5199 Před 11 měsíci

    Is it any better than the genuine screen?

    • @DeanAllen
      @DeanAllen  Před 11 měsíci

      Much better !
      I am 5' 9" the original screen was awful, has no idea why they made it that way (height) with the Givi, or at least that particular Givi, all was good (even if the looks are a little compromised)

    • @neil_woth5199
      @neil_woth5199 Před 11 měsíci

      @@DeanAllen awesome, good to hear I've just ordered a givi for my crossrunner. Thanks