Awesome video thanks for saving the heartache and frustration of butchering my walnut veneer in 2017, QX50 the level of care in your work clear. Nothing wrong with opening an infiniti video with George Gershwin
Great video - any insight on getting the bottom bracket in the console out so that you can remove the radio/BCM (Need to replace the BCM that sits on top of the radio.)
Hey, how do you remove the trim piece off the gear shifter piece. All my trim is destroyed so I bought a new trim piece set. Thanks, keep up the good DIY’s!
Lmao the little heater knob broke on my 2013 and sunk in the little hole, was wondering if you had to remove the entire plating starting from the clock all the way down to get under the knob
at the 2:26 mark you disassemble the pcb board. On my 2014 infiniti Q60 the black wire leading to the pcb can be unplugged and that step avoided altogether. It is a little further back fyi.
Do you have any videos of how to wrap the second part of the center console that you removed? I want to wrap certain areas of that part, not the whole thing and it’s kind of hard with the shifter just sitting in the middle lol
Bukklao G37 Thanks so much, i have been delaying wraping the interior because i didnt know how to take these parts apart but your video changed that. Much love
100th comment. Can you maybe make one to take off the display as well cuz my pre-cut carbon fiber pre lays have all the parts that you've done in your video and that part and another little ones here and there but I don't want to mess anything up
Thanks for making all these videos! They have been super helpful. I have a 2011 FX35 and the dome lights do not turn on. Fuses are all good. Have you come across a DIY fix for this problem? I would imagine it happens on the G37s as well. Thanks!!
So wait I thought as soon as I removed the center console there was three main hooks and now I put the seat warmers back in but sitill one hanging out near the bottom
“Hey How Are You I Have An 08 G37 And My Cd 💿 is not ejecting out of the 6 cd charger is there anyway you could help me I see you live in Maryland so do I thanks!
My car wont shift completita into park as soon as I turn IT off it start beeping and read on the gauge cluster Pshift. What can I do to fix that problem g25 2011 automatic
Thanks! Good things are headed your way due to you helping others!
I have a 2011 infiniti G25 n couldn’t find any videos about this but this video helped me the most, thanks!
Awesome video thanks for saving the heartache and frustration of butchering my walnut veneer in 2017, QX50 the level of care in your work clear. Nothing wrong with opening an infiniti video with George Gershwin
Your video is amazing. My question to you is how do I remove the heated seat knobs
Great video - any insight on getting the bottom bracket in the console out so that you can remove the radio/BCM (Need to replace the BCM that sits on top of the radio.)
Thank you I’m halfway done wrapping. The faceplate is the easiest part to wrap. Hardest to take off
Hey, how do you remove the trim piece off the gear shifter piece. All my trim is destroyed so I bought a new trim piece set. Thanks, keep up the good DIY’s!
Cool. Do you know how remove plastic cover on steering wheel? Mine is grey with black scratches and want to paint it. Thx
I can't find any instructions on doing the center shifter area with a _manual_ car. I can't seem to get the shift knob off.
Lmao the little heater knob broke on my 2013 and sunk in the little hole, was wondering if you had to remove the entire plating starting from the clock all the way down to get under the knob
at the 2:26 mark you disassemble the pcb board. On my 2014 infiniti Q60 the black wire leading to the pcb can be unplugged and that step avoided altogether. It is a little further back fyi.
What other infiniti models have the ability to take off the shift know and centre console? ex? m37? q50?
Plug all
Bro can you do a install video now ? Thanks
Dat intro doe 😎
that is not a console removal
Henry Gonzalez it depends on what you consider a center console 👍
1:04 I have those same screwdrivers but in orange. I got mine from a Matco dealer.
A Rogers 😂😂
Can i remove the shift knob and centre console on the sedan versions as well?
Plug yes
Do you have any video on how to remove the stereo head unit
Richard Sinclair yes
Thanks for the info man...
Do you have any videos of how to wrap the second part of the center console that you removed? I want to wrap certain areas of that part, not the whole thing and it’s kind of hard with the shifter just sitting in the middle lol
Seyha Pich I can make a video for you, but the shifter unscrews
Bukklao G37 Would you be able to make that video? It will be so much helpful for many people like me. Thanks for everything
Arm3nia91 yeah, I can definitely make that video for you💪
Bukklao G37 Thanks so much, i have been delaying wraping the interior because i didnt know how to take these parts apart but your video changed that. Much love
Bukklao G37 where is that video I don’t see it. 7 months past already. It would also be helpful to me.😄
100th comment.
Can you maybe make one to take off the display as well cuz my pre-cut carbon fiber pre lays have all the parts that you've done in your video and that part and another little ones here and there but I don't want to mess anything up
My heated seat knob fell thru doing this tomorrow
We just tried this, thanks. But, we didn’t have to remove the center display to get the center console out after all.
angela koch it was removed for wrapping purposes.
Thanks for making all these videos! They have been super helpful. I have a 2011 FX35 and the dome lights do not turn on. Fuses are all good. Have you come across a DIY fix for this problem? I would imagine it happens on the G37s as well. Thanks!!
How about the condition of the actual.
E E check the condition of the actual bulbs
@@bukklaog3717 ya those are all good. It's literally every interior light :(. Thanks though my friend!
E E tried swapping fuses?
@@bukklaog3717 ya, I checked all the fuses in the car and everything was fine. I also swapped the appropriate one anyway, but no change 🤷♂️
Do I gotta remove the AC Volume area to remove the shift knob?
Steve Reyes no the shift knob is held on by a c clip pin
So wait I thought as soon as I removed the center console there was three main hooks and now I put the seat warmers back in but sitill one hanging out near the bottom
Sun Shine it’s the snow option
Is the console removal going to be in the sequel or something? Radio faceplate and Gearbox cover isn't "removing the center console".
2001Canes BestEver yeah starring you.
Hey bro,
do you have any experience or advice on how to get, to the airbag control module located in center console?
thanks in advance!
Eduard Mihai What module is under there?
Eduard Mihai I’ve never removed it before.
SRS Airbag Control Unit (ACU)
Can you make a video of putting the clip back on that u took of at the 4:52? i cant seem to put it back in properly. much appreciated
Plug the tips point up
Good shit bro 👍
MAX 🙏
“Hey How Are You I Have An 08 G37 And My Cd 💿 is not ejecting out of the 6 cd charger is there anyway you could help me I see you live in Maryland so do I thanks!
Frank White you can probably pull the head unit out and then get them out.
I tried doing that but don’t want to damage my head unit anymore then need to lol.
Frank White no luck?
Bukklao G37 nope tried it
Bukklao G37 - would you be able to help me out?
Dumb question but should I disconnect the car battery when doing this?
No not really needed.
My car wont shift completita into park as soon as I turn IT off it start beeping and read on the gauge cluster Pshift. What can I do to fix that problem g25 2011 automatic
Jose Hernzndez there is a little notch with rubber covering it, put a flat head screw driver in it and see if that’ll fix it for now.
I have the same problem, what did you do to fix it?
Thanks bro
So the ac buttons are not removable?
They are removeable.
Removed the radio face plate now my ac doesn’t work
Appreciate it
Thnx good info
Hey bro I need to replace my USB port. Can I access it once I remove the Center console as you showed in the video?
No you’ll have to take the center compartment out. It’s behind cupholders.
Okay so is there no need to take the Center console out?
Still has to be done
Got it. Thanks for the info I appreciate it 🙏🏾
You think that the q50 touch screen display will fit on the g
Henry Navarrete with some alterations, it’s possible.
Bukklao G37 wtf you answer so quick so I seen how the q50 looks but in all you think it will function good and have a factory feel like
Henry Navarrete its not gonna be plug and play, but with some splicing it can be done.
You think you can make a video to see if it would work
Henry Navarrete that’s gonna be hard to accomplish I don’t have a donor car to operate on 😅
center console is the big piece in middle of the both seats,the one you took it out is shifter cover,and no need to remove climate control unit.
robert teymoori to each it’s own.
to remove the cover around shifter you don't have to remove climate control unit
So how do you do it I'm trying to get my debit cart that fell in between my cupholder and I don't wanna take the whole thing off
Ctfu... and the dealer wants to charge you 1200$ to do this... FOH.. Good show my friend!🔥👍🏽
MIKEMARBLES they charge what they want🤣
That's not the center console.
Shawn Balch it's part of it
Thank you sir
James Dean Cooper was this any help?
Yes just swapped my oem boot for genuine leather boot!!
James Dean Cooper glad it helped, thank you for the feedback. If there is anything you would like me to show just let me know🙏
I will man!
BRO THANK YOU🙏🏽
For the people trying to wrap the interior this is perfect 🙏🏽
i_MaTriiX_- appreciate it
you didn't remove the center console. fail.