Resetting/repositioning needles on Ford Mondeo MK4 speedometer
Vložit
- čas přidán 13. 09. 2024
- Video showing how to reposition needles on Ford Mondeo MK4 speedometer made from 2007 to 2014 when they get out of place due to "crazy" spin glitch in the speedo software or when they are removed for whatever reason
Really good video. Had problem with a different car but this video worked on mine too.
Excellent video saved me time and money. Thanx!
I thought I was the only one!!
Ford mondeo 4 ford mondeo do not work all the arrows on the dashboard. Where to look for the reason?
Thanks man! Do you think it’s the same on skoda superb 2? My LEDs are off, I want repair by myself. But I am worried that needles will show wrong numbers... Will work this method In skoda Superb 2?
It should work on any car with similar cluster design, unless there is a pin on which the needle comes in contact and rests on after power down, in that case I don't know how to reset them sorry.
How did it get up there in the first place ,iv just bought an s max and the same needle is stuck up in that position also
Wrong,
Put the needles in, then plug the connector from the car to the instrument cluster.
Turn the car key to number 2, and see where the needle point, then turn the car off, then spin the needle anti clock wise until it reach 0, WHEN it reach 0 then give the needle 1 little put like a tick.
You can hear the needle ticking like second needle in the clocks at home tik, tik, tik, as soon as it til on zero just push for 1more tick.
Turn key again to number 2 and the needle should idle at the correct position 🤷🏾♂️