184 LB Massive Motor Melt Down - Scrapyard Search - ASMR Metal Melting - BigStackD Trash To Treasure
Vložit
- čas přidán 7. 07. 2022
- Over 2 months since my last motor melt so I thought lets go grab a nice one. I only grabbed a 184LB - 84KG one as thats the heaviest I could lift into and out of my Jeep safely. A nice big copper haul to chuck on the stack thats for sure. Now sit back relax and enjoy todays Monster Motor Melt Down😁.
****
20% OFF RINGS & BRACLETS Simply use the code word DION on this link
gthic.com/?aff=27
This ring company makes bracelets and other things and I will only ever back a company I believe in and these rings are of the highest quality they are absolutely awesome!
**********
5% Off a furnace ,Burner, Full set up or Forge and a heap of start up info and links email me on bigstackddddd@mail.com
*********
Now Guys if you Feel like supporting the channel it wont cost you a cent as you can Simply just donate some of your time. By just by allowing the ads to play through this will help out a lot and that’s how I make a bit extra revenue and the good thing is more revenue means more giveaways and more treats for the dogs👊🏻😄. A better way to support the channel is play one of my playlists on your computer before you walk away from it and let it play through that really helps as well but don’t ever feel as though you need to watch the ads if you don’t want to simply skip them and move into the video it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻.
BigStackD Merch Link
bigstackd-casting-3.creator-s...
*********
461KG Motor Melt Down 34 minute Video
• 461KG Massive Motor Me...
**********
BigStackD DUST MELT
• Metal Dust Melt Down -...
**********
Follow me on Instagram for more behind the scenes pics.
bigstackd_c...
**********
LIFTER BUILD VIDEO
• WHATS THE TOTAL START ...
***************
AWESOME CUSTOM STEEL STAMPS FROM ALINA
www.etsy.com/shop/Stampsworks...
*******************
I also have a post office address below in case anyone wants to send a letter or something and I really love letters. Just be sure to add your online CZcams name and or email address. .
D Heighway
PO Box 7192
Eaton, WA 6232
Australia
****
********DISCLAIMER****DO NOT TRY THIS AT HOME****
These videos are for entertainment only and nothing you see in these videos should be tried without proper experience. These videos are not intended for children.
**********************************
My other 360+ videos
/ bigstackd
********
Tongs forged by my Friend Sam on his channel below
Sam Towns, Bladesmith TONG MAKING
• Forging Crucible Tongs...
*****
Follow me on Facebook
/ bigstackd-casting-2935...
********
Forge supplied by my friends at Devil-Forge.
Dont forget to email me for a 5% discount link and a heap of info to get you Started😁
*********
FURNACE SETUP 4KG
• Copper melting in bran...
FURNACE SETUP 10KG
• Devil Forge 10 kg Ligh...
TEMPERING CRUCIBLES - Pauls Garage
• How to Temper a Graphi...
GAS USAGE AND SPEED COMPARISONS ON ALL 4 DEVIL-FORGE FURNACES
• 4 Melts 4 Pours 4 Poun...
WHAT YOU NEED TO START MELTING METAL including LIFTER AND TONG BUILD
• WHATS THE TOTAL START ...
LEARNING TO CAST VIDEOS - Swdweeb
• Learning to cast metal
COIN MOLDS & CUSTOM COIN MOLDS LAS VEGAS - ArtByAdrock
artbyadrock.com
CUSTOM COIN MOLDS NEW ZEALAND & AUSTRALIA ONLY
/ eccentrickiwicreative
PETROBOND SAND AUSTRALIA ONLY
www.greensand.com.au/epages/g...
***********
HOW TO MIRROR FINISH A BAR
I start with an 80 grit flap disc on my angle grinder then I use my drill with 50 mm round sanding discs . I start with 150 grit then go through the following Grits 240-400-800 Then once I get to the following Grits I use a small squirt of WD-40 1200-1500-2000-2500-3000. The WD40 helps to lubricate the discs and stops the sanding disk binding up with the metal powder . Then after that I use my buffer wheel on my bench grinder to get a perfect mirrored finish on it.
*****
#bigstackDCasting
#ASMR
#MeltingCopper
#MeltingMetal
#bigStackD
#TrashToTreasure
#dumpsterdiving
#scrapyard
#Dumpster Diving
84 KG Massive Motor Melt Down - Scrapyard Search - ASMR Metal Melting - BigStackD Trash To Treasure - Zábava
Now would you believe it’s over two months since my last motor melt. I thought I would do a big one today but not my biggest. I chose this as it was the largest one I could lift safely in an out of my jeep as I don't have anyone to help me but what a great haul of copper in this bad boy. An awesome addition to the stack that's for sure so sit back check this vid out and hopefully I'll see all you sensational subs next Friday👋🏻Have the best weekend you possibly can😁
Now this is epic!! :D
Friday just gotbetter
10kg of copper you had there would be $100 at my yard
@@scrapitaus basically exactly what his book said no?
A small trailer with a hand winch/boom rated at 300kg would be nice and it protect your back. Here in the states we have setups for the back of pick up trucks and they work well.
I watched someone yesterday melting aluminum pull the crucible out of their kiln and the brick stuck to the crucible bottom, I said out loud “place some cardboard underneath and that won’t happen.” 😂
You’ve literally melted that into my brain.
👌
The 3000 RPM (2 Pole) rated AC motors will tend to have more copper than the slower rated machines. If you can find them, get the open drip proof motors as they usually have more copper than the enclosed motors, that includes all speed ranges.
Knowledge I didn’t need but now know thanks my friend
Also avoid EEx motors, they usually have more cast iron than regular ones, aluminum casing motors are best. Remember that the rotor cage is usually made of aluminum.
Copper ratio increase as the speed of motor decrease
Your videos got me through recovery from my broken leg
If that dog wasn’t out there sun bathing just living his best life! 🤣 I think I come back every Friday more for the little doggos than anything else! 😊
That Thomas CD/Radio would be absolutely loved over on DankPods' channel!
Your two dogs are so cute thank you for letting us see them have a good day brother
3:58 I'm sorry but I cracked up laughing when you dropped that eye bolt into your tray and it fell right thru that little hole 🤭 that's the kind of crap that happens to me all the time!
He finally did it; he actually managed to find a pair of socks that are the perfect match to his metal values notebook~
I love how you just strip all these dirty little motors and just make them MELT.
Those puppies are having the time of their lives, I bet they wait for you right by the door to come home from work and hang out with them 😂
I got some real tough shit going on in my life right now and your videos are helping me fucking crush it, thank you as always!
Without a doubt, the motor melts are my favorites by far.
Immediately clicked to watch lmao
Yup, me too, soon as I saw it up.
So u expect a medal??
Ur cute
I remember when I first started watching your channel I wondered how you didn't have more subscribers than you did at the time. It wasn't very many in the grand scheme of CZcams. Now you're kicking up steam and have come a long way. It's been incredible to say to least
“The Fugitive!” Great flick! 😉
I loved that you had the fugitive playing in the background.
good unholy morning... (it's 4am here...) GRIN!! Another motor melt!! Excellent!
I was thinking “I wonder why he doesn’t pour two at once, it would be more efficient”, and then later on the video, you showed me why 😀
Just because one happened to get a little stuck? Ok
@@madmax82988 Yeah, I’m guessing that mold just sucks. We wasn’t able to use the mold until he can get the bar out… after he was done pouring everything
i used to watch this to fall asleep, now i stay awake every friday to watch
That pizza looks delicious. When I was younger my grandma would always make pizza for the whole family. One she made was a pepperoni & jalapeno for my grandpa. He let me try it one day and I fell in love with it. Thanks for bringing back a memory for me.
3:20 - Have you tried smelting aluminum out of the rotor? There are squirrel-cage aluminum conductors in the rotor, melt them when you can. Good luck from Rostov-on-Don
Вы пробовали выплавить алюминий из ротора? В роторе алюминиевые проводники в виде беличьей клетки, расплавьте их при удобном случае. Удачи из Ростова-на-Дону
I so agree, coppers individual look is so irregular and so stunning I just can’t get enough.
I actually used borax in my lacquer coated copper wire melt about a week ago and I was amazed how clean the bars were with absolutely no imperfections, like pitting and carbon from the graphite mould that can get drawn into it.
I use about 1 table spoon per kilo and incorporate at the beginning of each melt.
I also found it keeps your crucible very clean.🥳
I’m hooked it worked great on lacquer coated copper wire and dirty wire.
Thanks again Bstackd 😊👍
I have been melting for a few years now, I thought you only used borax in Brass and stuff, but you can use it in copper? Thats cool
@@cesare8270 absolutely %100 mate, very clean bars.
Just try to remove as much as possible with the back of a spoon.
It will build up on the back of the spoon as you move it around the crucible.
You need to take it in and out of the crucible at regular intervals to allow it to solidify on the spoon.
I actually have a bucket of water next to me when I do this.
It helps speed up the skimming process.
But ‘do not’ fully cool the spoon, only briefly submerge the spoon and be sure there is no moisture still present as a steam explosion is imminent.
Just be careful.
Perfect impurity free bars await.😊
@@heathstott So clean the big slag chunks if needed, then add borax and do as you said? I will have to try this today, Thanks!
@@cesare8270 yes get the majority from around the edge, you can try to work the slag to one side but is difficult. ( as it it very runny at those temperatures.)
This will help reduce the amount, getting rid of all is not possible.. but if you pour slowly it shouldn’t come over into the mould.
Give it a go, let me know what you think 😊
@@heathstott Okay I will try that in like 30 mins, about to go out and do some melts
Watching these videos is so satisfying… so much destruction and the final casting is so awesome.
It’s so awesome to see your channel get massive! I’ve been around since about 100k I think. Long enough to have heard your voice a time or two lol keep it up stackD!!!
@yukari akiyama go to the very beginning and yes
I find the ice melt so satisfying, and I love the ice smash too.. lol
Man. You unlocked a core memory or something. I was watching the copper bars form and I was suddenly reminded of Jello in my school years, the orange flavored stuff that was awful. It was like watching forbidden orange Jello. Thanks boss.
The forbidden jello
It’s been awesome watching your stack grow. 150lbs from the goal. Can’t wait to see what you have in store for us.
Using the balance to have all bars at equal size really increases the satisfaction factor!
The surface of a copper bar looks like the surface of Mars, both very beautiful and intriguing 👍👊
With treats like that, those are a pair of happy, happy pups!!!!
I still love the look of the poured copper bars, each one a beauty!!!!
Wow, from 831 to 841. Congratulations friend.
This is how we are progressing and you will reach the goal 😁
Big hug 🖐🏻💪🏻
Loving the videos.
A random thought... If you are seriously considering a trailer, you might think about adding a small winch/motor system, to lift heavy items in/out of the trailer (like a flatbed tow truck) - either self-powered or running off vehicle's power system.
Anyway, cheers!
Good idea but depends on legality
@@southaussiegarbo2054 I don’t see why there would be a legality problem. However if there were to be one I would definitely like to know.
@@Halcyon7681 Australia has so many rules around that stuff
Such as set winches etc you require a permit/licence to operate them.
@@Halcyon7681 so many ridiculous laws here its a joke
I start a playlist every night to fall asleep to. NOT saying your videos are boring at all, I also watch them to relax. But these sounds are better than white noise, and it’s a mostly constant volume level through out the whole video. One day you should do a 1-TON motor meltdown. Granted, I- we can only imagine how much work that would be. Probably could be an hour long video though.
I love the copper melts and pours. It’s like the forbidden orange juice
So shiny copper😁 Silvery-rose, malleable, wonderful conductor of the heat and electricity.
Loveing the unicorn socks this week. Great melt. 👍
I just wanted to say you have the best smelting videos out there. Your safety tips and knowledge tips are great. I have seen other videos out there but your attention to detail and the pride you take in your work is what puts you over the top. Keep it up and thanks for what you do.
Cheers Nick 👊🏻😁🍻🍻🍻
@@bigstackD nice
I've a couple of KG of aluminum smelted so far! I've just about saved up enough to do a copper smelt. Loving this hobby, thanks for getting me into it BigstackD
SMELTING refers to the using of heat to extract metals from ores. The acts being performed in this video are simply the MELTING of metals.
No that's not the full definition. the act or process of getting a metal from rock by heating it to a very high temperature, or of melting objects made from metal in order to use the metal to make something new:
@@DavidKirwanirl Definition of smelt from the Cambridge Advanced Learner's Dictionary & Thesaurus © Cambridge University Press)
smelt | INTERMEDIATE ENGLISH
smelt
verb [ T ]
US /smelt/
to obtain a metal from rock by heating it to a very high temperature
A beer, pizza and The Fugitive on the TV, man that's some great taste.
'I'll pick a motor I can easily lift into and out of my jeep' he says and casually strolls home with an 82 kg bag of metal! The case wedge was a close shave and it is great you didn't hurt yourself with a nasty pinch. Always a pleasure sitting down with a beer after a long week and watching your latest melt!
I Love your socks! Sometimes i only wait for them!
the snorts and snuffles from your dogs are super cute
Cheers from the US! I don't know how your videos got in my feed, but I'm glad they did! It is mesmerizing to watch each melt and casting. I have binged almost 2 dozen of your vids so far.
check skuller metals he got his start watching bigstackd also
Gotta love those textures that come out on copper bricks. Something that’ll never be duplicated twice. Nice. 👍👍
Happiest of Fridays D 😁 hope it finds you and your family in the same wonderful mood that I'm feeling n.n looking forward to another epic friday melt n drinks n snacks with the boyos 🖤💜🖤💜🖤💜
I used to scrap grain bin motors,until I watched these vids. Now I mold whatever I want outta them. And people here basically give old ones away.
21:24 Nice shot nothing but net. Second shot got stuck between the rim and backboard.
Pink unicorn socks. Best ever 😂😂
BigSnackD got me giggling. Hands down some of my favorite content
Damn, I was close on the copper weight but messed up thinking the casing was aluminum. Great melt as always, BigStackD, this is the best way to start the weekend with a melt! I hope you’re doing well down under, mate!
Also, I LOVE watching the molten copper freeze in the mold!! Can't get enough of that🥰
I always find it funny when D is listening to classical music, with the rest of his vibe you’d expect hard rock or metal
20:51 Nice, a stone copper and ice sandwhich, my favourite
So... 150lbs away, yeah? Great choice of motor, delicious looking haul, great pours, and a beautiful tag added to the shop. Oh yeah, note to self.... Must try drooly's pizza if i ever go to AUS. 🤤🤘
I love it when he drops the rock on the ice.
I remember when you bought that new forge .your going to need a new lining soon .and maybe a new mold for the copper .
Hey D...great melt this week! I just love watching you take these motors apart. I was surprised at the amount of copper inside this particular one as well. We're getting so close to reaching your ultimate goal. That's a major achievement man!
I've basically been watching since the beginning and you can bet your sweet ass I'll be right there when you come across home plate!
Have a great weekend! 💙✌️
The classic Leidenfrost Effect with the water rolling over the hot mold.
I'm Argentine and in each video I look at the detail of the notebook... Yes, the price in ars went up lol
Can you imagine the size of the ingot made if he ever has a house fire! Lol
It may have been mentioned before, but instead of using a grinder / recip saw to get the copper out of the motor, I use a large sharp chisel and hammer. It slices through the ends with no mess and may actually be quicker.
Always enjoy the big copper melts, especially the pure wire and cable!
TIP FOR CLEARER ICE: If you insulate the bottom and sides of your ice mold (not the top) your water will take longer to freeze but its clarity will be much better.
Good video! I watch your videos when I need to clear my mind and have some simple little laughs. Love the way you rock the unicorns!
Been watching this channel for a while, don't recall seeing so much copper from one motor before.
I like you dogs fella. They seem real happy and smart.
Glad to see more ingots added to the pile
Can’t wait to watch the video. I just have to say you bring joy to my Fridays. I actually have a couple of video ideas.
I like that you weighed them as you were pouring!
I just want to point out the best part of this entire video.....Thomas the train radio opening scene......love it
Hahahaha @1:39 you got me there, good one.
That SOUND of pouring copper is SICK!! Ingot and Bullion receiving meaty treats, also SICK!!
In the first minutes of the video I sensed a bit of sarcasm towards restoration videos! 😂😂😂
Yay motor melt! I always love these teardowns
i was watching your channel about 2 years ago and now you are much closer to your target, i hope you will get it
I really enjoy watching you take the motors apart. Looking forward to seeing you put one back together. 💛
23:40 The copper bars look like miniature mountain ranges.
Hand poured solid copper bars….
Better than any treasure out there
One of my favorite videos yet! Those kilo bars are absolutely stunning!!
I could watch motor melts everyday and I don't think I would get tired of them, love the copper melts and from a motor its perfect. That tag was also in excellent shape to be added to the list of great motor melts!
We're experiencing some hot weather this year, 92 (33C )degrees with 70-80% humidity, that is pretty hot for us in the Northern states but the southern states are already over 100 ( 38C ) with high Humidity. Take care everyone! Hope you all have a great weekend, BigStackD started it off right!
@Forrest Farris I spent a summer in Colorado Springs during the early 80s, many people came there looking for work and it was hard to find a job, I did the day labor thing as construction was booming. I had no idea at that altitude it would be in the upper 90s so much and it seemed hotter with the thin air.
Beautiful place to visit but kinda ruined my outlook for living there. That was the year Pikes peak still had snow in July yet Temps were high according to locals.
@Forrest Farris very thin, I could barely make 1/4 mile before my lungs were on fire, this as an extremely fit 20 year old! When I got back to the Midwest and 100ft elevations I felt like superman running!
I think for me the part of all your videos that I look forward to most is the “socks reveal”
Once you hit your target weight I’m buying a Devil Forge.
Your videos are therapeutic.
Brother thank you for your videos, I absolutely think and know it saved my life, I started watching your videos when I was doing very very bad doing stuff I wasn’t spoused to, I had very bad hobbies and one day after I almost lost my life to be correct it was one week to be exact after that incident I was just sitting o friends, family lived far away me and my wife wasn’t doing to good I was just completely drained and didn’t know what to do, one thing I knew for sure is that I still have purpose on this world because of how the incident happened and how everything went down and hours before the incident this one restaurant was open and something in the restaurant happened and they closed down for the night, so my friend came to my room and asked my wife where I was and she said that she didn’t know than she said that she was looking for me too and can’t find me for 2 hours now than my friend came out of the room and seen lights In My car that’s how he found me if that restaurant was open and didn’t close I would be dead and not here, before we went on the trip before we left the house I prayed in the car never did that before and how something happened in the restaurant so they could close down that’s why I believe that there is still purpose for me in this world other wise I wouldn’t be here writing this text, I went thru some horrible time almost lost my wife my kids, so I was sitting home one time thinking and said God I know you have purpose for me because of you the way things happened I’m still here, and it’s all during the pandemic every one is afraid of each other no body talking to each other that threw me in depression no job, no friends, family and some friends are living far away from me it was almost got bad again I almost lost it again, so I was sitting talking to my self talking to God than I lit a cigarette and open CZcams the first video I watched was #bigstackDCasting and I used to scrap metal so I had quite a bit of copper, aluminum and brass and BROTHER thanks to you for your videos it gave me a new hobby I was excited it literally changed my life, my wife was like what got in to you why you so excited all of a sudden, she thought I was doing bad again and I explain it to her and she helped me get a melting pot and everything I needed to do what you do and it changed my life saved my life, I’ve been doing very good, I dropped all the bad habits and went in and got help and now doing very good I got a job now family doing amazing relationships with wife and kids is amazing and every time after work if I have time I’m melting, so big thank you my Brother I’m so glad I came a cross your videos, anyway thank you a lot and so sorry for the big and long comment. Once again your videos are amazing.
These electric motor melts are so satisfying to watch. Thanks for another great one, D 🤙
21:32 Pink fluffy unicorns melting a motor 🎶🎼🎹🦄
That IS a great haul!
The boys love a good meat snack! :D
All those bars! You building a house? LOL
I love them all!
The caes from the motoer would make a great planter! :P
Thanx for a great vid D!
It's really cold down here too! Geraldton is like a big freezer!
Kick back with a pizza and watching the Fugitive. I like that. Videos are awesome. Great copper haul this time!
Car is getting repaired sitting in rest room watching ur video what a ossom day love from India 🙏
You ALWAYS do such a great job, bigstackD!! 😃 Keep up the good work!! 😃
Best part of my week.
The sound was fantastic on this video.
So there is a display of EXTREME confidence in your pouring skills to pour directly onto your weight scale like that.... or maybe you're just looking for an excuse to buy a new one?? Lol. Great vid brother!
I'm going to start watching your videos later so I can have a BigSnackD and a beer with you! 😂 (Like I need another reason to have a snack and a beer!)
Another awesome video from you, thanks and keep them coming.
Damn that pizza looked good.
You are doing a very exceptional art works sir.
Thank you for sharing it with us.
I hope it pays you near to what it worth.
Awesome copper bar's thanks for sharing bigstackd