fiber laser Stainless Steel cutting, Air vs nitrogen
Vložit
- čas přidán 3. 01. 2021
- For more information about fiber laser metal cutting machines
www.hindcam.com
Call or whatsapp: 9212300300
In this video we compare fiber laser cutting of stainless steel using 2 different auxiliary gases.
We shall use high purity dry nitrogen, it shall give clean cutting edge, without any oxidation.
In other method we shall used dry compressed Air. - Věda a technologie
Thanks for the guidelines
Thanks
Sir very helpful
Thankyou Sir
Very nice sir
Thanks
Thanks Sir possible to know to buy raycus cutting head please advice thanks
Share your contact details. Or call or whatsapp on 9212300300
Make video on ups for laser machine
Okay Sir
Sir, I have a 1500w fiber laser machine. Does the 10 bar screw air compressor work with me well? How much does the acier carbone cut and how much does the stainless cut?
10 bar pressure is on low side.
With air while cutting MS it is cut like steel (same speed same parameter).
So if you are using 1.5kw it should cut upto 6 mm MS easily.
But recommended is upto 3mm because after 3mm speed shall be very low
While cutting SS the cutting speed is same as nitrogen cutting (if pressure is same at nossle). Max thickness is also same as in case of nitrogen
@@Hindcam merci beaucoup
we have a 1kw fibre laser cutting machine. We want to cut 4mm carbon steel with compressed air.
Kindly tell me the following parameter settings - 1. Focus distance 2. single or double nozzle and its aperture size 3. Cutting speed. Thank you.
Sir 3 mm ke bad bur aata hai Air me, For Air cutting you need to use same as SS parameter of same thickness. Recommended to cut with oxygen
Sir compresur ka kiya price kiya h
contact this no- 8595648467
SIR PLEASE DO A VIDEO ABOUT CNC PRESSBREAK MACHINE BUSINESS VIDEO.
Ok
Aaap video me air compressor setup kaise karte hai bata sakte hai ?
Ji
Aur ek chij cutting parameters ka software settings kaisa raheta hai...
Dear sir nitrogen pe ms cutting karana hai to kay karna hoga please quick reply me
Nitrogen me MS cutting karne ka koi faayda nahi. Oxygen se kaatna sabse sasta tareeka hai. MS ko nitrogen se kaatne ke hisaab se nossle hi design nahi hota
@@Hindcam Can we cut Stainless Steel with O2 gas for fabrication products?
Your setup is wrong and you are also sharing wrong information, I have 6 KW machine and Kaeser ASK-34T screw compressor which gives 15 bar and 85 CFM, I m easily cutting upto 18mm SS on
air, I dont get any moisture or dust particles on my protective lens with my setup. If you really want to cut on air then you need screw compressor not the reciprocating compressor.
Sir 6kw is very powerful source.so you are not noticing lack of pressure. The model you mentioned works at 13 bar.15 bar is upper cealing, not the delivered pressure. You can check the datasheet of compressor.
I have seen 10 of factries in China. They use reciprocating.
Why waste 6-7 lakhs on screw, when you can have entire setup in 1.5 to 2 lakhs.
Moreover at the head it may drop to 10-12 bar. You can measure.
Some smart salesman earned some extra profit, by recomneding German brands
@@Hindcam I m using a reciprocating compressor with my 1 Kw machine for cutting stainless steel, works fine but i got a lot of moisture on the protective lens which i have to clean several time during cutting. I m using a good compressor which can deliver up to 0 Bar, an air dryer and three filters
Air means?
Compressed Air
YOU TUBE - Robotizado con CD 4017 , NE 555 Pilotos Andre
spam
Hello sir ji 🙏🙏
Hello Sir
1000watt fiber laser cutting machine ka price?
25 to 30 laks
2650000 +GST, with Raycus 1kw source, raytool cutting head, cypone cutting hw and software
Hi sir , if cnc fiberlaser 1500w to cutting stainless steel by netrogen gas if one cylinder have 5000 liter of gas netrogen how much the time it will work
Sir kabhi calculation nahi kiya
Sir aap ka contact number dijiye
Contact This no-8595648467