EP6: The Brake Master Cylinder | CLASSIC MINI 25 RESTORATION
Vložit
- čas přidán 29. 07. 2021
- Welcome!
This episode is about restoring the Mini Brake Master Cylinder.
New seals are fitted and everything is cleaned.
After inspection I noticed the master cylinder had some scratches in it, so it will be replaced by a new one. (That's why the part isn't painted)
Feel free to leave a comment!
Kind Regards
RAC - Jak na to + styl
superb nice and clear no stupid music thanks
Nicely done. A set of pin punches would help remove the split pin without the Mole Grips 👍
Thanks for the tip Toby! :)
Perfecto! saludos
Thank you Pablo!
You should also mention the parts name
Thanks for the tip, I will try to add then in the next videos :)
The piston is stuck with the spring for me.. cant get it out..
Hi! Maybe soak your pump in penetrating oil for a night, and then try again. Is there absolutely no movement in it? If you can get it out, make sure to check the walls of the cylinder for damage. Good luck!!
@@restoringaclassic9489 I was able to get it out thankfully.. it needed some really good hits.. keep the videos coming.. i am myself restoring a mini following the videos..
A.m.s.r for cars
No need for silly music 😊.