44 MPH on Lawn Mower!
Vložit
- čas přidán 11. 02. 2022
- In this episode, FASTMOWER gets even sketcher fast and super muddy.
Please consider supporting my work with Patreon - / chud327
If you would like to mail me a product to review, fan mail, gifts, etc. My address is Chud327, PO Box 687, Callahan, Florida, 32011.
I hope you like and thanks for watching. - Sport
1-handed at 40mph is big balls territory hahaha
Probably my favorite mower build I've seen on CZcams, love it!
Thanks so much and thanks for watching. Very cool comment. BTW, if you watch part 2, it goes even faster and still with one hand.
@chud327 I watched that episode after, so awesome. I've been working on my 1999 Murray 17.5hp and getting the motivation and inspiration from your channel, thanks!
@@dub537h5 love hearing that and just be careful.
@@chud327 hey i'm tempted to do the same thing, i wanna buy a cheap mower off facebook marketplace or get one from my grandpa and do a pulley swap
could i do the same thing you did to fastmowers to a craftmans lt1000? and do you have any tips or things i should know about? thanks a ton in advance
I love your videos I had a craftsmen LT3000 that was sitting and rotting then I found you videos and now it’s running better than ever thanks to you that thing can’t get stuck with tractor tires on I’m in middle school and some people think it’s weird but I don’t care :)
I get comments about it being weird or just buy a 4 wheeler, that is just those who don’t understand. Cool that your is running better than ever and thanks for watch. BTW, I have a new mower build video coming out tonight, I hope you will join us at the premiere.
Going above 25mph on that stock front end is way sketchy. I got a mini mower that does 60 if you want me to give you the specs of that front end. Easy to make and handles nice.
I agree. I am building a craftsman GT18 and I am planning on stretching it a bit for hill climbing and mudding here in PA. How did you build your front end?
@@johnkoury1116 I built mine off of the mower racing rules in my area. I used a pair of mini quad spindles and built the rest.
Whats a list to make it do the 60 really wanna get in to this me n my friend have a lot of mowers
@@VirginiaMaker Awesome. thank you.
@@ryanschjang5793 well depending on the setup you have will depend on how fast you can go. I've seen some transaxles do 50mph + , but it's alot of work. The easiest way is how I did it. It's also safer. Live axle. I used one from a quad. I'd had the gear ring, disk brakes, and bearings to spin on. If you want to use the stock engine you need a transmission that will take a vertical belt and give you a horizontal output chain.
Or an easier way is useba horizontal shaft engine (harbor freight 212cc) gokart clutch a long chain.
As for the front end, look up some mower racing front ends , or if your adventurous and good with a welder you can make one. Again look up racing rules. They did all the R&D for us to make it safe. You can also find many CZcams videos on all this.
60 is easy to do on something so small and light. That being said, it's sketchy as hell being soo open.
Good luck and be safe. Wear a helmet.
Very cool,looks like fun,great job.
It is a blast and thanks for watching!
Good build- fun to watch- thanks
Thanks so much and thanks for watching!
i like the editing style of the first 2 mins or so kinda a “no bullshit style”
Dang that mower was freaking cooking that’s fast 44 that’s gotta be a record or something
I have seen others do faster, however, 44 is fast enough for me. Glad I can say it did it, but really don't need to do it again, was a bit sketchy. Thanks so much for watching!
Epic work.
Thanks so much and thanks for watching!
Great video
Wow that's crazy.
Sorry I missed it again I was at another game
Thank chud keep up the good work
40 on a lawn mower?? That’s insane
Agreed, I was fun when it was safely over. Thanks for watching!
Sweet ride man. 👍
Thanks so much and thanks for watching!👍
Awesome video Chud327 I don't know how you do it keep up the good work
I just do it a little at a time and thanks so much for watching.
You're welcome man
Yep tractor treads got my vote
This is too much fun.
Spooky at 44mph, but yes fun other wise... Thanks for watching!!
Very cool mower Chud, i like your projects :-)
That so much and there is a new build video coming out tonight, hope you will chat during the premiere. Thanks for watching!
By far the best sounding tractor I've ever heard!! Fastmowers sounds mean!
Idk how the back axle held up🤣🤣
You should add an aftermarket carberator and do a governor deletion that would turn it up to a whole another level
Mudmower480 on TikTok I did exactly what you just said
@@mudmower480 lol ill go check!
WAIT WAIT WAIT, Ur getting ur cans/trash muddy!!!😆🤣😂
Funny and thanks for watching!
I found a set of Wooley Boogers that I have to make adapters for the wheels in order to use them on my craftsman. I was at the scrapyard looking for another frame and other parts and I found those tires. I looked beside them and I found a broken Yamaha Trimoto three wheeler and got everything for $50. I have been looking for an inexpensive three wheeler and they do not exist. Are you down in Florida? It alwways looks beautiful. I wanted to build the craftsman for the buildoff but then I got hit on my Harley by an F350 and literally had to learn how to walk again. I am 18 months into recovery so I am trying to get out and start building again.Keep up the great videos.
Sorry about the accident and yes I am in Florida. A build off would be very cool! Thanks for watching!
Fantastik Ok
Thanks so much and thanks for watching!
Man that’s awesome I can’t wait to move to Florida in 8 months! Time for a trail ride!
Only about 6 months now, hurry up, the weather is great! Thanks for watching!
@@chud327 I can’t wait! No problem! See you in the mud!
@@LIMowersAndMore BTW, new mud mower video coming out tonight.
@@chud327 can’t wait!
I have a old mower that popped willies when I was cutting grass. Something happened to the engine and I am a professional on mower engines .
FSATMOWERS lol
I need to proofread better next time. BTW, next time is tonight. New mower build video coming out later… thanks for watching!
You're getting around where I'd say you may want to check out speed rated tires 😂
Or just know it will do it and don’t keep doing it… thanks for watching!
I wish i could built a mower like this
Yes, maybe some day, thanks for watching!
My mower just did 44 mph, it has a 2 inch pulley on the back and a 5 inch pulley on the front. Then the belt fell off and the battery died so I was stuck at the end of the road. I got jumped off by a farmer so I went back home. Scariest 44 mph ever.
What an adventure, hope you wear a helmet. Was my scariest 44 mph run ever too. Thanks for watching!
@@chud327 yes I did wear a helmet, jeans, boots, and a t-shirt
Are you changing bothe motor and rear end pullies? From motor 3" to 5to6" and rear end from 4 to 5" into 6 to 7 " pulley?
This one is a double pulley swap. It has a 7 on front and a 4 on back. Was able to use the stock belt too. Thanks for watching!!
What’s your pulley ratio? Love ur video’s keep up the good work 👍🏾
there is a 7 inch in the front and a 4 inch in the back. thanks for watching.
Hey chud was wondering if you tried out the phone in steering wheel thing awesome videos thanks
Not yet, but I should. Thanks for watching!
Came here from the previous video. How is the torque on it? Does it get up steep hills? Or only good on flat? Thinking of doing something similar
It does fine with torque, plenty when you are in first gear. And plenty of speed when in high gear. Thanks for watching!!
It might be loud. But you’ll have the shortest mud in the neighborhood.
So true and thanks for watching! BRW, my latest mower build video should be coming out tonight, hope you can join in the chat. Thanks for watching!
@@chud327 I will try to be there as long as I’m able to.
@@MikesMischief I figured you would be.
I'm running a 9in front and 4.5 rear on my lt1000 it's geared a Lil high, does about 30mph idle in 5th
That's fast and thanks for watching, be careful!
Hi mate
In your opinion which are the best for the farm and rocki roads
I love the craftsman mowers best, but many are great, thanks for watching
What kind of motor do you have in that Craftsman
Hey man can send some info on how you rig up your pedals ?
I have several videos, check them out and thanks for watching!!
I ran over some trees with my mower and now the break doesn’t engage so It doesent stop even when pressing the break do you have any idea what my problem could be lol
Maybe a stick got stuck somewhere or something was knocked loose... good luck and thanks for watching.
How do I keep my belt from slipping with tractor tires
If you don't go extremely small with the back pull it does not slip too bad. I have a 3.5 inch on my other poulan and it has been known to slip. thanks for watching.
How’s poulan #1 doin? Haven’t seen it in a while.
where do u get your tires?
I find 90 something % of my tires on facebook marketplace for cheap. Good luck and thanks for watching.
Looks like it would be a good hunting tractor. You know like a 4 wheeler. Shoot a deer and lay it across the hud.
That would be cool as long as you are not trying to sneak up on them. thanks for watching.
Did you bypass the governor?
I usually just unhook it and go... I ran my gas pedal straight to the carb. Thanks for watching.
what size tire is on the back? thank you
20x10x8's thanks for watching, sorry it took so long to answer.
I'd like to see you completely rewire a mower
I have done some wiring in the past and did a complete boat motor rewrite, it has a mower engine. Almost the same, thanks for watching.
I bet that thing is 350 degrees
Might be and thanks for watching!
How’s you make steering stable
This mower is like new so it wasn't that bad ... I have others that I would not want to go that fast with. Thanks for watching!
@chud327 what transaxle?
I am not sure, what ever came stock in it. thanks for watching.
@@chud327 probably a peerless
Where’s the Big Polan
It is just chilling in the shed, I need to get it out soon and do some riding… it has been so long, I made a list last night of the mud mowers and completely forgot the OG Poulan, thanks for watch.
What inch belt did you use
Since I put the 7 inch on front and 4 inch on the back, it used the stock size belt that came with it. However, I don't remember what size it takes. Let me know if you need me to try to figure it out and thanks for watching.
And also do you have any hydrostatic mowers
What about snorkeling?
Good idea and thanks for watching
4mph isint that much more from bigger tyers, do u think your lacking engen power?
I was worried about blowing it up with the 20 inch tires, the 22 did let the engine turn as hard. thanks for watching.
there is no way on earth i would be running 44mph on a mower that's basically stock, at least when it comes to steering and ride height, i don't care how tight the steering is, it's simply to dangerous to run that fast with a stock mower steering setup
Then u won't like what im going to do, how's 50mph! Lower hight but stock stering. 9" pully on front and 4" on back
@@droptheblades895 be careful and wear protective gear is all i can say, if you're going to be going that fast with stock steering geometry you take your life in your own hands, i'll stick to the 23mph that my ford yt16 goes
@@darkside0914 i will, I'm probably going to change the steering a bit to make it less sensitive
Agreed, was very sketchy and probably will not do it again. I did have on a layer of protection and thanks for watching.
Chud, reach out to a brother I'm tryna join the CZcams and help a brother out #chudsbuds
Just seeing your comment and thanks for watching
My lawnmower goes faster bc it goes 67 miles per it has 16 horse v twin 12 inch pulley on front and 4 inch pulley on back
Too fast for me, be careful. Thanks for watching!!
My lawnmower goes faster bc it goes 67
That is crazy fast, please be careful! Thanks for watching!!