Goodman Control Board Replacement and Programing using Cool Cloud HAC. EP29
Vložit
- čas přidán 26. 08. 2024
- How to replace a Goodman control board and program with Cool Cloud HAC App
www.coolcloudh...
Intro & Outro Music
"Alive" by CHOIX
#minisplit #review #ducted #Samsung #short #transformer #nighthawkhvac #hvac #hvaclife, #airconditioning #maintenance #heating #cooling #refrigerator #refrigeration #refrigerationcycle #airflow #refrigerant #techlife #installation #hvachacks, #tools #furnace #tech #electric #residential #commercial #heat #comfort #ac #hvacservice #hvactools #repair #toolreviews #fieldpiece #aircon #packageunit #condensation #RTU #rooftopunit #daikin #goodman #carrier #americanstandard #trane #ICP #adp #Lennox #Fujitsu #mitsubishi #ductless #controlboard #coolcloudhac #bluetooth
Saw this on 5/5/24. Thank you for info.
Your video helped me a lot, I am an apprentice and today I had to go to change a control board in a house that was damaged by lightning. Without your video, I would not have known how to program the board.
Glad the video helped. That’s why I do this. Thanks for watching!
That cool cloud is a great idea. The air handlers are Bluetooth capable. It’s just genius. I hope we see more of this.
Seems like it’s just a Goodman thing at the moment. I’d like to see this on more brands.
Really liked your video Bro. Really covered everything 🙌.
Thanks Wes!
Thank you very much for information!!!
I had to replace one board and blower motor and when you do that you need to program the board. I ended up reusing the old board and the furnace worked ok.
Hey great job! I'm tech support and a thumbs up on the video! Professional!
I have the same control board, where I can buy it, the water came inside my basement and I burn it, I need to replacement it.
Try a bic pen for those standoffs it works pretty good
cool mode short cycle timer how to fix Goodman unit
cool!!!
So awesome. Wish more manufacturers would do this. Thanks for watching.
Reversed polarity? Did you also check phasing on transformer if backwards it will give reverse polarity reading as well.
Is there a similar utility to program a York controller board (Varidigm 364809)? I see there is are RS485 contact points on the board labeled A,R,GND,B. I"m familiar with RS485 and serial comms. I'd like to try reflash the f/w. thanks. Great video BTW. precise and to the point !!! no excess bla bla bal. :)
How long did you wait for the sharing data part?
15 minutes.
I have a question. How long did it take for the system to finish update/ download?
About 12-15 minutes.
What is the model # of the Bluetooth module that you placed on the Air Handler board?
This was so long ago I don’t have that information anymore. If you contact Goodman and provide them with your model and serial number of your furnace or air handler they should be able to get you the part and model number.
Just more complications to go wrong rather have a capacitor 😊 and be more reliable.😊
Do the air handlers have same Bluetooth chip?
The newer units have the Bluetooth chip integrated.
Curious if you use a flat rate system and if so which system?
Thanks
We use a flat rate system.
Ok
No,No what happens if your phone's battery is out, what happens if you forget your phone does that mean you can't run your furnace or ac.
7
This whole thing is a bull she** Stay away from goodman !!!! Good video.