The 10 Upgrades I Install on EVERY Klipper 3D Printer
Vložit
- čas přidán 4. 06. 2024
- In this video. I talk about my 10 Must-Have Klipper Upgrades. Brought to you by Sovol, makers of the SV07 Klipper. Check out jle.vi/sovol and use the coupon code NEXTLAYER at checkout to save $10-20 (on orders of $259 or more).
So you're running Klipper on your 3D printer. After all, all the cool kids are doing it.
But now you're wondering, what's next? In this video I'm going to share with you my nine (actually ten) must-have Klipper upgrades to get the most out of this incredibly powerful firmware.
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:25 Background
02:08 Upgrade No. 1: Klipper Backup
03:24 Upgrade No. 2: KIAUH
04:18 Upgrade No. 3: Mainsail
06:11 Upgrade No. 4: Custom Macros (Print Start, Print End, Load/Unload, Clean Nozzle, LEDs On/Off/Status, Take Snapshot)
08:43 Upgrade No. 5: Exclude Object
09:41 Upgrade No. 6: KAMP
10:25 Upgrade No. 7: Obcico / OctoEverywhere
11:39 Upgrade No. 8: Timelapse
12:27 Upgrade No. 9: gPhoto2 + GCode Shell Command (Optional)
14:36 Upgrade No. 10: Klipper Screen
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
🔗 OTHER LINKS 🔗
👉 Obico: jle.vi/obico
👉 OctoEverywhere: jle.vi/octoeverywhere
👉 BigTreeTech: jle.vi/bigtreetech
👉 ModBot's KAMP explanation & tutorial video: • The FUTURE Of 3D Print...
👉 JJ Shankles' Octolapse tutorial video: • Klipper Timelapse is E...
👉 klipper-backup installation instructions: github.com/Staubgeborener/kli...
👉 KIAUH installation instructions: github.com/th33xitus/kiauh
👉 Klipper Exclude Object Feature - setup and configuration: www.obico.io/blog/klipper-exc...
👉 gPhoto2 + GCode Shell Command tutorial video from EB3D Printing: • Mainsail Timelapse Set...
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #klipper #3dprinter - Věda a technologie
Hey! Thanks for watching :) I'd love to hear what you thought of this video, and if you liked it, don't forget to smash that Subscribe button...
Any chance you could show us how to install klipper?
For the people watching this in the future: Exclude Object and Adaptive Meshing is now NATIVE implemented in Klipper. You just need to enable them in your printer config!
I think the most important upgrade of kilpper is changing the root password
Good point!
You should do that in the install part of RPi OS. Click the gear that will open a dialogue that will let you set a custom url for your local network. I use the name of the specific printer. It will also let you input wlan info, and set a user and password all will be baked into the RPi OS install.
What did you change it to?
@@jerbear7952 hunter2
@@jerbear7952 yeah we all gotta have the same password.
also i’m looking for the best upgrade password for my system
Another Macro that goes by the way-side by most companies factory installed Klipper: M600 / color change. Once up and running you just have to add it in your slicer.
I have finally got Klipper to run properly, and I have already installed OctoEverywhere, so KAMP is on my list!
Very cool video, thanks a lot.
Thanks for the video!👍
No problem 👍
great video and good sound
Thanks👍
Thanks 👍
If you don’t install Klipper screen you can VNC into the RPi and use the copy sd card utility to manually back up your entire sd card/drive. Having a local copy is the best practice, as sd cards are prone to failure due to power cycles. Takes a few seconds to swap out a corrupted/dead sd card
Installing klipper screen on the SV-07 will brick the printer. Sovol uses a custom FW / fork of klipper for their MKS pi/ pad 5. I have the 07 and the 07 Plus.
@@jeffdavenport469 I feel Klipper screen is a huge mistake. It kills 98% of the Pi’s functionality. Like being able to make a 100% backup of your setup. I use an iPad with all my printers in its own tab in password/biometricaly locked Brave browser. There is zero need for a screen on the printer, ZERO. It just adds more headache to the process
@@geauxracerx I would GREATLY appreciate how to do this. VNC being a remote control I can't get my head around how. I use naturally ssh and also winscp to access files on the pi, can you use that to do the backup ?. Is the back up a bare metal image backup such that the file you transfer to your PC is an exact image of the sdcard. As you can see, easy to say this can be done, but I don't see how ???, any chance of a tutorial or reference to a YT vid that actually 'does it' rather that say it can be done. Rgds.
@@joeking5211 to VNC in first you have to Sudo raspi-config ( can be done in SSH )
Down to 3 Interface options
Down to I3 VNC enable
Save reboot. VNC is now enabled and you can use VNC Viewer to have Remote Desktop access
On the Desktop in the taskbar click the Raspberry/ down to Accessories/ SD Card copier. This makes a 100% copy of your main sd that you can just pop in should your main one stop working, as they are very prone to do. You can have that first one, or work in a routine where you periodically make a backup. This is how I do it as it keeps it as up to date as possible. I shoot for once every couple weeks. I just reformat the backup sd card and create the new backup. It’s really fast considering it’s making a complete copy.
this man really just said your life is at work 🤣
But really, thanks for the video! just thought that line was funny
I am running the Sovol klipper upgrade on my sovol v06 plus, and I cannot get the exclude object to work. tried to upgrade to the latest version of clipper, but it bricked the computer , had to go back to sovols version
Not sure klipper is for me but thank you for the great info.
how do you install these plugins if you dont have a rasberry pi? i have the ender 3 v3 ke and i have already rooted it and installed moonraker,mainsail and octoapp with octo everywhere but i would like to use some of your upgrades in this video.
hi i loved this video, i added exclude object and kamp, but none of them work
This was very helpful! I just swapped my printer over to Klipper and felt a little in over my head on the basics. Appreciate the content
Awesome, I appreciate you
Very well-done video. Can you share your macros? I want to add them to my K1Max. Cheers.
Was there a specific GitHub that you got your macros from or did you learn to write your own?
Has anyone upgraded a sovol sv06 with a raspberry pi4?
I'm currently running octoprint on a raspberry pi 4 and i want to switch to klipper.
I heard that i must update my firmware on the sovol as well on the raspberry pi.
In my understanding i must update to a new firmware on the sovol
Install mainsail OS on the raspberry pi
Will my sovol sv06 screen work after that?
Should i add a new screen?
Should i instead buy the new klipper screen for the sovol sv06 and ditch the raspberry entierly?
Thank you very much!
Nice video! Unfortunately it's missing the latest klipperi hotness: spoolman, the new filament manager. Didn't manage to install it yet myself, so I was really hoping for it to be in this video.
Haven’t heard of it. Will check it out.
@@thenextlayerthis is content I would be interested in!
for KlipperScreen, I use Debian on a old Microsoft Surface. It works really well and is big enougo to be seen from anywhere in the room.
Did you connect the Surface tablet directly to the pi USB? Or did you need another plug in to make it work?
Where can I get the information to convert my printer to klipper. I feel like I can get much higher speeds and was recommended klipper to do so.
Very cool video, thanks a lot. Any possibility of a video turning/ flashing a Sonic Pad into a full fledged klipper setup?
The sonic pad is a full fledged Klipper install. You just need to make/install the specific firmware and config file for your printer. Then connect the printer to sonic pad with appropriate usb cable
I installed klipper about 10 months ago with no screen, and recently added klipperscreen. Absolutely awesome
Yep!
Thank you so much for this! I have heard mixed things but can these upgrades be done on the Qidi X-Max 3 also? Mine comes in next week and I don't want to start making changes if the firmware will reject them. Thanks again!
NO! Don’t touch klipper on the Qidi machines or you’ll brick them!!
@@thenextlayer that was what I had heard elsewhere but thank you for confirming before I did something stupid!
Really lame when corps lock down open source software 👎
Great video mate, more Macro stuff please and thank you 😊
Oh and maybe Klipper trouble shooting
Good suggestions, thank you! Keep them coming
I love Fluidd, but I have a slight preference for Mainsail. I use a Raspberry Pi Version 1 camera, and I found installing both Fluidd and Mainsail together caused it to stop working so I had to go one or the other, but Mainsail and KlipperScreen provide an amazing UI on the printer, with a very functional remote interface also
Great video! You production quality is getting better for every video! I think it would have been worth mentioning that klipper and octoprint is not mutually exclusive (see octoklipper), one is after all a firmware and the other is a front end, I felt it was a bit unclear sometimes in the video what Klipper really is and what moonraker/mainsail/fluidd is...
That's a good point, but in my opinion putting Octoprint on Klipper instead of something cleaner and more stripped down like Fluidd or Mainsail kind of defeats the purpose a little bit... don't you think?
Oh and good point about the differences, I didn't explain that. Thanks for the feedback
I totally agree on that, just thought it might have been worth a mention in case one wanna go from octoprint with marlin and keep the familiar plugins. I would of course still recommend mainsail/fluidd with the plugins you mention in the video any day of the week @@thenextlayer
funny that the camera of the sovol fell down 0:40 xD
So do you like mainsail, fluid, or octoprint after having used all 3?
Mainsail
I am watching this even before i have a klipper installed. Thats how i know i am doomed
You should make a new video regarding KAMP meshing feature now being a part of klipper itself, only requiring the setup of [exclude_object] and adding one new setting to [bed_mesh] in printer.cfg
Great video very interesting. How hard would it be to jailbreak a Bambu lab and install klipper? Would it even make a difference? Regards from Milan, Italy
Currently considered impossible and I wouldn't do it anyways...
@@thenextlayer yup^
Super with an episode on Klipper🤩, do I dare to ask for more Marco stuff? YES please😀
I'm not a macro master (yet), but, good idea :)
Where can I find that wall covering?
I did a whole video on it!!
Just use a old phone or tablet. Cheaper and probably have a drawer full of old phones.
Much better too than the klipper screen as you get the full web interface, plus connect all your printers to that interface so you only have on screen rather than 5-10-20 depending on your set up.
Touch screens are great for single set up or even two printers but when you get into small game status, it’s a lot nicer to have a single HMI rather than one for each machine.
If you’re from the manufacturing world have a HMI for each makes sense but not in 3D printing.
hi your videos are very usefull. Thanks. Regards from Florence, Italy
Thanks for the kind words! Really appreciate it.
the github auto update package is a bitch to install on Raspberry Pi too, so dont feel bad. I keep getting the message that it was all done successfully, but when I check the repo, there's nothing there
I like the idea of macros but sadly setting them up just doesn't work with the way my brain does. One that I'd love would be to restore a failed print. I'd love to just select a file and tell it to start at a specific layer or height without having to go in and edit the gcode and hope for the best. If i can see on the display that a print failed at 16.4mm I'd love to just restart the print and tell to start at 16.4mm. Absolutely no idea how to even start something like that though ... I'm like steve jobs that way. I just come up with the great ideas and wait for someone else to figure out how to do it 😉
power lass ?
Have anyone instaled kiauh on the sv07? I cant find the sd card to flash it
You don't need to flash it, SSH in
@@thenextlayeri dont have the ssh password
When I made the switch to Klipper I thought I would miss Octoprint plugins.. but it turned out that everything I used to need a plugin for was already built into Klipper and/or Mainsail (and done even simpler and/or better).
Bingo
Ah that's indeed the Morley length.
I swear the panny d advanced Klipper development by like a decade.
Why do you have short hair on the thumbnail?
I have a library of photos with poses. I need to update it lol.
To demonstrate the 0.0001mm nozzle hotends embedded in his scalp.
Kia... Uh? Sorrento?
Ha!
I listened to the cool kids and switched from Duet with RepRapFirmware to Klipper... don't recommend it at all, felt like a downgrade...
Will be switching back after I get a CAN 36 toolhead that supports RRF.
RepRapFirmware
+ Clearer documentation
+ Easier upgrade and setup
+ Everything is a g-code, and no restarting of firmware for every little change
- Less cool kids
- Pricier if you go Duet brand
You are missing Telegram Bot
Since I bought a bambu I couldn't help but read the title as "This printer needs over 10 upgrades"
Don't forget Klipper screen on old android phones so you can use your old dusty tech for good
All this added complication to run klipper just to speed up your prints ain’t worth it! Lol 🤣
You don't need these. It makes stuff more simple and saves you time in the long run..
@@firelion98 I just got my Neptune 4 pro, I have no clue how to even get started with klipper, I guess I gotta rtfm
It’s only complicated before you use it. Once you use it it makes everything way less complicated.
so basically just watch the other videos, not this one... pffff.
"Upgrades". Disappointed actualy.