This GTR Tested Us In Every Way… We had such a tough week….But we Got it!
Vložit
- čas přidán 21. 08. 2024
- Get your “Make Racing Great Agin “ shirt here. my-store-d9101...
Welcome back everyone !
In this episode we go through GTR world to get this high horsepower GTR ready to do another drag and drive!! But it does not want to cooperate one single bit . Join us now and let’s get to it!!
Need competition race parts or tuning visit ! pfispeed.com
or email sales@pfispeed.com
pfispeed
9230 county rd 24
ft.lupton,Co
80621
I got to see the car in person yesterday. It's so cool to see something you've seen on CZcams for the last few years in person. I work at the next door neighbor shop to Execuitive Wraps. When the owner told me it was coming in for a detail I just about flipped. Your work is amazing brother. So cool to see it up close.
Very cool!
@PFIBrent btw Trevor is the only Canadian to call a Cresent wrench a Thumb wrench. We actually call them a Saskatchewan Socket set up here.
And i though they called them hammers @Randomhero806
adjustable hammer in southern Ontario
Deckhand key on offshore hydraulic dredges
The voice over at the start, didn't need to see you to know you had that massive smile on your face, you bring joy to everyone around, love your videos and love you too Buddy.
Thanks for sharing the struggle and taking care of our Canadian boy!
Brent, I hope your back is all healed up, and you are back to 100%.
Still dealing with it , but i’m sure trying to work on things.
@@PFIBrentfeel better bud! I know how back problems can take forever to heal.
@coachster sometimes they don't heal, persay. I'm a couple years younger than Brent and have a degenerative disc disease that will never be fixed... so, it has to be maintained with procedures and injections to reduce the pain. which allows you to have some sort of sanity thru the pain and avoid getting drugged up by the bad docs our there. 👊 take care of yourself Brent. Lost my 30s, but Ablation and epidural steroids have given me a new life 😊
@@smithjohn3080 oh I definitely know. I’m a few years older than brent and I’ve had my share of back injuries from sports and work. My problem is I have a high tolerance for pain so when I feel it to where it starts to bother me, it’s actually really bad and usually takes me out for weeks. Have also gone through stages where doctors would prescribe pain meds but that started to become problematic when I’d take them like candy. For the past several years I’ve actually limited myself to only taking ibuprofen and methocarbamol the odd time just to take the edge off.
Whatever you do brother I wouldn’t have any surgery. I had two back surgeries and regret it every day of my life.
33:06 just watch Brent's face in the car lol mad props to you guys for persevering thru all these issues!
When the video starts off with a Bob & Doug McKenzie reference , how can't you just stay glued to the episode.Good day, and welcome to day 420.
The second I see the camera catches a moment of your physical pain, I instantly understand the severity of the situation. One day when we get to meet I want to ask you about the injury that follows you. Thanks for pushing through, it’s guys like you that I draw inspiration from. 🤙🏻 way to overcome the GTR.
That sealer is similar to yama-bond 5
Used to seal the crankcase on motor cycle engine s at the case split
It basically NEVER leaks
That is 500 pounds of stuff in a 1 pound bag. Pretty awesome to see this process.
Love how you show the ups and downs.. most car channels only show the good. Love how the team all comes together to solve the puzzle
PFI Proves that Team Work Wins everytime.... Good job Guys
In Finland a wrench is called jakoavain which translates as deal key.
One small step for man, one giant leap for mankind.
Love to see the struggle times. It helps the rest of us know we aren't the only ones that hit those speed bumps!
Bob and Doug Mackenzie from the Great White (brown now sadly) North is classic! Watch their movie Strange Brew (from the 80's so be understanding) as it's also a classic!
Thanks for the wicked content as always dudes!
Selling parts to building GTRS loving it my guy! LET GO PFI! *CLAP CLAP CLAP* LETS GO PFI!!!!! LETS GOOOOOOOOOOOOOOOOOOOOOOOO!
Man I love this video. It just shows you can accomplish anything when you have a family working together. Wish I had that but what can you do when your an only child thug it out by yourself.
Its awesome to see you guys work and figure things out as a team its great to watch
@23:50 That looks like an evasive Nemo VS big "Farm" or Brucey Saying G'Day Mate! Chomp. ha ha, never give up.
I know the feeling all too well when everything is going amazingly well, then there's a catastrophic issue. That's a crazy engine to learn too. Thankfully Nissans engineering is somewhat decent and the problems were able to be diagnosed. Such an insane project to take on, but persistence pays off in the end!! 🥳
you have one great crew PFI !!!
I’m running the poor man’s vr38. In my s15 . It’s fought me the entire way, most of it user error biggest hit was 7200$ in wrong turbos that refused to spool. Was able to squeeze 899 out of it. Ran into fuel system limits and backed it down to around 820! Has a poor man’s home built th400 with a lockup. Hopefully to get more seat time this year. It’s a 1/8 setup. Looking to run low 5s/ high 4s
I met this gentleman at Byron today for the first day of Sick Summer. Very cool and friendly guy to chat with. I hope he does well this week! Awesome car!
appreciate this channel shows the the ups and downs
Holy hell Brent, watching you guys figure out all the issues and get this beast back up and running was amazing! It really puts things in perspective when Im just trying to figure out a relatively easy D series transmission but feeling so lost 😅
I’ll be up in the near future for a tune on Jack Black!
You can totally tell brent loves working on new stuff!!
Can’t help but laugh I watched a Steve morris video a couple days ago and he was heating the big black hemi up using 2 heat fins on one side of the head and a big propane torpedo heater to heat it up to re torque the head gaskets. Love the video
My man busted out Kriss Kross! " Some of dem try tah rhyme but they can't rhyme like this!!" Soo sick. Have heard that in like 30 years 🎉
Back pain sucks big time I know how u feel brent I just had back surgery for the 2nd time in my life it sucks but it feels better not to be in pain and be able to walk and stand and do things with my kids.. KEEP KILLING IT BRENT PFI SPEED ALL DAY EVEY DAY LOVE WHAT YOU GUYS DO AND MY SON IS ABOUT TO DO A 5 SPEED SWAP IN HIS SINGLE JINGLE LOVE ALL THE PFI FAMILY KEEP IT UP GUYS
We can move moutains. Not all at once, but with great determination and going one shovel full at a time. Moving mountains isn't so hard.🤘🤘🍻🍻 great job brothers can't wait to see that sick week P.B🎉🎉
The first three minutes of BOB ROSS and gasket sealing. lol. This channel is my all time favorite and when I get on CZcams and it’s not a new episode I get upset.
Love watching you put the engine together, thanks for for explaining it, this was just as good as watching you put the nsx motor together, this is amazing
PFI is my favorite channel of all time
Hey, Take-Off!
Got some Bob Ross action on the head gasket glue section. Lol
I dont understand why u and BISI are not mentioned more in the FWD formation. Shit u guys have pioneered these FWD into something people said couldnt be done. BISI came out with the very firs H/F TO B/D Transmission and bam here we are today making front wheel drive great again. Aloha and mahalo for thenvids braddahs 🤙🏾🤙🏾🤙🏾
you three are freaking hilarious! love watching you guys wrench. i learn so much! especially to have fun while wrenching!!!
Let’s test the parts, get the label’s and you’ve got a great team Brent!
Thanks for the awesome interesting content.
Cheers bud!
Let's gooooo! Boys doing work 💪 gtr tech's after getting this car sorted. They are far from simple. Keep pushing lads 🔥
Checked out of this video multiple times! But came back saw the finish and glad I did!
Stoked to see you conquering another one. Was elated when you said it was ready for race week. Then let down 😂 when you said sick summer instead of RMRW.
I call that a “Metric Adjustable, Persuader or a pry bar”.
Coo loo coo coo coo coo coo coo.
somebody forgot to tell this dude that a good racecar is easy and quick to work on. seems like this gtr is a pain in the ass to work on. gotta pull the motor to do anything... a k series could make similar power and be far more simplistic and easy to work on.
What an outstanding team. Love the video. Modelo time! 🤙🏼🤙🏼
Love the incidental music, Brent.
Now thats dedication! Let's gooooo!!!
Awesome seeing Sean!!
Trevor has already pronen his insanity defense😂 good to see
Talk about dedication 👍🏻🤘 rad seeing yall go hard at it not get mad and get her going no matter how many hurdles really bad ass to see i remember when brent was caging this thing brent is the damn man for sure lol and now hes a gtr man and can command big dollars lol watch out t1 👊
If you guys keep going as hard as you've been going with the GTR this car will be the greatest and fastest single project to ever come out of PFI speed my hats off to you guys there's very few guys in the world like you guys! I hope he goes full billet full race car with the GTR and races with the best in the world one day soon!
The fact you showed the right markers to place on the chain is great 👍
love how that monster came out u guy's killed it u learned something new everyday keep on rocking 💪🤙
Outstanding Performance, great job brother !! 😅
LOL I organize my bolts the exact same way I can throw everything in a 5-gallon bucket tearing it apart and do exactly what you just did organizing the bolts and you already know where everything goes they all have a certain head washer style everything and it flies together good job you guys keep it up
That old school in the background when Shane is loading Trevor's car needs some air time on the channel
This is why I love yall! I asked on Facebook and within a few hours I got a video to watch lol came for the Honda content and stayed for the vibes.
I was working on it for yah 🤩
@@PFIBrent well no one can say Brent doesn’t care about the fans of his channel ever. Y’all are the type of people everyone needs in their lives. I’m grateful for your time and effort. It adds a lot to your plate to bring us along for the ride.
@@PFIBrent I’m getting me one of them make racing great shirt asap!
Can’t wait to see the GTR back out
That car is amazing... Can't wait to see drag and drive
never give up
Love your determination brent!
Glad you figured it out
What an adventure! Holy!
Keep crushing it Brent 👍🏾💯💯
Golly, there's a lot of stuff in that engine bay. Y'all got it sorted in the end.
aww man thisd things are streesss but you found it! kings!
Sad to know Missed y'all in Odessa Missouri
I was really thinking about having a GTR butt damn just to check the oil you got to pull the engine+!!!! LoL 😂😂😂
I once used a lil sealint on my head gasket and it lasted about 2 weeks and started pouring water from the pass side head on my 2jz
Time to get the Bully or Sho-n-nuff back out!
Love you boys pfi speed for the win !
Love ya work PFI!
Brent I have to say that a engine is a engine they are all the same in my eye 👁️ I think that way because I'm a cyclops only one eye... LoL I Tig weld Turbo kits too and other stuff welding people think it is odd of everything that I have achieved.... Keep up the great content..... Definitely waving from Florida by FF nice having Land in family for 46 yrs......
Talk about over engineering!I love my brutal big block Chevrolets even more.I put a Roots blower on a 538 cid pro stock engine and it just blew thru the converter.
Let’s go I freaking love PFI
I learned from this. thank you.
Epic video/content guys!!! 😎. Watching from South Africa 🇿🇦
And thats why gtr owners dont work on their own cars 😂😂😂, man that was a lot of work in the end. Great job getting it all sorted.
Much love from Guam/ Washington state! 🤙🏾🇬🇺🇺🇸🍻
52nd! I see bobby-pins GTR is back together. Long time subscriber, Roger in Pierre South Dakota
I always copper spray ANY MLS gasket that has no coating
banger video never quit
That poor gtr is living on borrowed time 😂😂
Man, thats such an issue with late model GTR's there is just so much going on in such a small space making a mistake is TOO easy!
Let's go pfi crew
Thumb wrench lol in Australia 🇦🇺 we call it a shifter
Got the black belt in gtr stuff now 😅
Master brent
Do you have a haro monocoque for sale?
We call those things Swedish wrenches in Denmark.
This was awesome
When using gasket-maker i am always worried that by wrenching the head down you might press lots of that stuff into the cooling-ports. Great video again guys, btw how is the shop cat doing havent seen her some time? Big Up!
Killer video. Love the gtr series!🤙
Brent for president 24'
Use the permitex spray a gasket on the gasket.. it's red and you can build up the thickness
The irony wasn't wasted on me 🤣
How you used a regular piston ring compressor tool i don't know. Props to you
"Hey guys" - PFI Fix
May want to check your oil gallery gaskets
Is there a benchmark , back pressure needed on. Turbo four-cylinder engines ? Brent let us know, some seem to think it is hard on turbine shaft bearings, I don’t believe that, I think a little back pressure in the exhaust side helps, thanks BigAl California.
The optimum is one pound of drive pressure for one pound of boost. Less back pressure will make more power because the engine doesn’t have to push anything out of the way making it available to have more clean air in the hole 🤩
even the aftermarket sump looks small..willd
Go on to the GreatWhite North.
Working on R35 is going to be easier from now on 😆