Hello, I'm working on a 2018 VW Atlas. Question, I have a B189CF0 "Crash Shut-Off, Active code. When I removed the Airbag Module, I Still Have that code, and U015100 "Lost Communication With Airbag Control Module". These codes are located in the Diagnositic Data Interface-Gateway. However the only codes scanned that were located in the Airbag Module location, were for the Pass. and Driver Belts, as they should, due to the Belts being deployed from the impact. From prior VW's The so called "Crash Data/Crash Shut-off data was located in the Airbag Module. Will having the Airbag Module serviced, remove this "Crash Shut off, Active Code in the Diagnositic Data Interface-Gateway. In other words the gateway can not be be fully cleared, untill it sees some kinda reset info from the Airbag module, or is this some type of dealer only procedure to remove this Crash Code. Best Regards...and thank you for any info you are able to provide.
Ok what I would do in this case is : -Check airbag fuse in passenger compartment fuse box. -Remove the airbag module and Clear crash data on the module by using airbag software if you have a one . Otherwise try to find nearest airbag shop to clear that module for you . - -Fix all what is needs to be fixed like seatbelts and anchors , -check for impact sensors connections. You should be fine after that .
@@gunleak2290 Thank you for your reply, I was unsure if the airbag module needed the reset, but from your comment you have confirmed it does. Did you have this done with the VW Atlas in the video? Best R egards
Do you have a video on how to remove the usb port?
Not sure what usb port you referring to ?
Hello, I'm working on a 2018 VW Atlas. Question, I have a B189CF0 "Crash Shut-Off, Active code. When I removed the Airbag Module, I Still Have that code, and U015100 "Lost Communication With Airbag Control Module". These codes are located in the Diagnositic Data Interface-Gateway. However the only codes scanned that were located in the Airbag Module location, were for the Pass. and Driver Belts, as they should, due to the Belts being deployed from the impact. From prior VW's The so called "Crash Data/Crash Shut-off data was located in the Airbag Module. Will having the Airbag Module serviced, remove this "Crash Shut off, Active Code in the Diagnositic Data Interface-Gateway. In other words the gateway can not be be fully cleared, untill it sees some kinda reset info from the Airbag module, or is this some type of dealer only procedure to remove this Crash Code. Best Regards...and thank you for any info you are able to provide.
Ok what I would do in this case is :
-Check airbag fuse in passenger compartment fuse box.
-Remove the airbag module and Clear crash data on the module by using airbag software if you have a one . Otherwise try to find nearest airbag shop to clear that module for you . -
-Fix all what is needs to be fixed like seatbelts and anchors ,
-check for impact sensors connections.
You should be fine after that .
@@gunleak2290 Thank you for your reply, I was unsure if the airbag module needed the reset, but from your comment you have confirmed it does. Did you have this done with the VW Atlas in the video? Best R
egards
czcams.com/video/cSYHe1nA3lw/video.htmlsi=lwV5klVuI91nRZrV
Check airbag module fuse in passenger compartment