Lego 2023 TIE Bomber ALTERNATE BUILD! - TIE Advanced (No extra pieces!)

Sdílet
Vložit
  • čas přidán 10. 09. 2024
  • After doing some mods to the new Lego Star Wars TIE Bomber set, I thought I'd take a shot at making it into Darth Vader's TIE Advanced! This alternate build doesn't require any extra pieces, so as long as you have the set, you can make it! :)
    Music: / glitchxcity
    DISCLAIMER: Due to the recent CZcams TOS changes, I would like to make clear that these videos are NOT intended for children, and more for a wider demographic of adults and young adults
    #lego #legostarwars #tiebomber #tieadvanced #darthvader

Komentáře • 74

  • @TheBrixHub
    @TheBrixHub  Před rokem +12

    Just to clarify the round tile with a single stud at the top is a substitution for the two 1x2 semicircle tiles with a stud hole on top! Really sorry for that goof :DD

  • @juicegodalpha
    @juicegodalpha Před rokem +31

    Built this today after building the TIE Bomber yesterday. There are some steps that require the removal of previous steps in order to put the pieces on, the cockpit snaps off easily from underneath, a few pieces did have to be swapped with others found in the set, the top doesn't securely attach with Vader in the cockpit even when leaned back. Design looks great for display even with a few kinks

    • @TheBrixHub
      @TheBrixHub  Před rokem +5

      Thanks for the feedback! Which steps were out of order btw?
      Also, do you use Instagram? If you could show me a photo or video of the problems then I should be able to find a fix :)
      (My Instagram account is @brixhubmocs)

    • @bdo7765
      @bdo7765 Před rokem +2

      Out of the 4 criticisms listed in JuiceGodAlpha's comment, I found only 2 of them true in my case. The cockpit assembly DOES fall off rather easily, and I did have to backtrack on a couple of steps (56, 85, 86, 87 especially). I did not have to swap or substitute any parts (unless we're talking about the very top circle bit, but you warned us of that in your pinned comment) and I'm able to get Vader in there without dislodging the top. You have to remove the cockpit face and the roof, put him in, then lean him back (the Dark Lord of the Sith deserves to relax) - then reassemble the roof and the cockpit face, and it all fits just fine. Hope this helps. Cheers!

    • @DefinetlyNotRome
      @DefinetlyNotRome Před 5 měsíci +1

      @@TheBrixHubI can't find the piece on the first step

  • @prvt.harumi6821
    @prvt.harumi6821 Před rokem +8

    looks amazing , wings are a fucking nightmare to build. thanks for throwing it all in 1 big hunk instead of step by step.

    • @limerickorange3218
      @limerickorange3218 Před rokem +2

      Fr I spent an hour an a half trying to figure it out

    • @TheBrixHub
      @TheBrixHub  Před 4 měsíci +1

      It's just a case of mirroring the build for each, I figured it would be pretty simple

  • @samszeto7303
    @samszeto7303 Před rokem +4

    Nice, I already have Vader's tie from 2016, but this is defo great for those who don't

    • @TheBrixHub
      @TheBrixHub  Před rokem

      Same! Though mine has discoloured in the sun unfortunately :D

  • @alanake9406
    @alanake9406 Před rokem +5

    I've gotten mine in the morning, I loved the build but come on, having the Darth Vader minifig, I'll definitely try this, great build!

    • @TheBrixHub
      @TheBrixHub  Před rokem

      Awesome! The Vader minifigure should fit in the cockpit pretty well :)

  • @jaczylijaaleniepowiemkto3243
    @jaczylijaaleniepowiemkto3243 Před 2 měsíci +1

    4:37 I hope I'm not too late to the party but I would REALLY love to see your take on the TIE Shuttle 🙏🏻🙏🏻
    It's one of my favorite SW vehicles ever and I practically got the set just to rebuild it into a shuttle but it turns out I suck at building spaceships.

  • @Commander_Raveth
    @Commander_Raveth Před rokem +1

    It looks perfect. As if it were a 4+ set. But that's not the point. It's creative, easy yet advanced. This is the definition of using the combination of imagination, hands, mind, semi skill, and bricks in a over perfect combination. Top performance truly.

  • @justthink1616
    @justthink1616 Před rokem +3

    When the tie fighter (75300) retire i will surely buy more of these to build other tie fighter versions...

  • @thehistory5210
    @thehistory5210 Před rokem +2

    Couldn't find the 4x8 piece at the start

  • @cincinxgamer1772
    @cincinxgamer1772 Před měsícem

    Yo man thanks for the help it looks cool on my shelf

  • @Toad1K
    @Toad1K Před rokem +2

    Wing shaping is looking good!

  • @MrYoda4211
    @MrYoda4211 Před rokem

    I got an extra fighter and bomber to make an interceptor and advanced after I saw the awful interceptor/fang money grab. This might have been one of my favorite builds ever. Some instructions could be clearer. Some pieces are flimsy (it’s an alternate build). It looks amazing and I love it.

  • @hikary-kun5914
    @hikary-kun5914 Před rokem +3

    Hi, wonderful build, I love the tie vadera, and it is a valid alternative to the original release without spending lots of money. I would like to know if it is possible to blend together the tie bomber and the tie fighter (75347+75300) to make a much more accurate build. Thank you again for this model.

  • @vanimapermai
    @vanimapermai Před 11 měsíci

    The bits that connect the wings to the cockpit keep falling off and step 86 required disassembly to get the curved tiles on other then that its a fantastic model and i enjoyed building it.

  • @gone117-r8g
    @gone117-r8g Před rokem +2

    cool, I'm hoping they do a tie advance sometime

  • @DarthCobay
    @DarthCobay Před rokem

    Just bought two of these and an imperial shuttle off of marketplace for $50, no figs. One tie was complete, the other was partial. Might be able to make this! Need a few replacement pieces on one wing though, which I may have in my box of pieces.

  • @MathewWeldon
    @MathewWeldon Před rokem

    Just finished mine thanks for this tutorial the model looks awesome

    • @TheBrixHub
      @TheBrixHub  Před rokem

      Thanks!! I'm glad it turned out ok! :)

  • @mridulbisht9865
    @mridulbisht9865 Před 9 měsíci

    I was looking for this thanks 😊

  • @seansundeck3912
    @seansundeck3912 Před rokem +1

    i was wondering if combining the tie fighter and the tie bomber would make a good tie advanced?

  • @bro-bafett9807
    @bro-bafett9807 Před rokem

    Let's go! Thank you my good man.

  • @bdo7765
    @bdo7765 Před rokem +2

    Thank you so much for this video and especially the step-by-step instructions! I ordered this set JUST to build your version. I honestly think LEGO intended for people to do this, and that's why they included a Vader figure - but I'm so glad I didn't have to work it out for myself! :) I won't receive my kit for another week, but I will try to post an edit when I get it done. Thanks again!

    • @TheBrixHub
      @TheBrixHub  Před rokem

      Nice!! Glad you like it :)

    • @bdo7765
      @bdo7765 Před rokem

      @@TheBrixHub OK, got it built! A couple of steps were physically impossible, but a little backtracking / disassembly made it all work. Step #96 REALLY needs to be expanded into more steps, as some of the pieces are not visible in the image - I had to put it together as best I could from what I could see, then figure out where the remaining pieces went by process of elimination, and then tear it apart and start over. Now that it's done, however, it was WELL worth those small hassles. I love it! You're a LEGO genius.

  • @BRICKABLEOFFICIAL
    @BRICKABLEOFFICIAL Před 5 měsíci

    Great vid! :)

  • @dr.slimewise7650
    @dr.slimewise7650 Před rokem

    Gonna get this done next

  • @johnhume1
    @johnhume1 Před rokem +1

    I don't know if I'm missing something, but it seems the 4 side panels can't fold in nearly as far as they should, because the studs from the 6x6 plate w/ 5 holes hit the back of the 4x12 plate.

    • @CastorTroy666
      @CastorTroy666 Před rokem +1

      I had the same problem, but found a solution

    • @johnhume1
      @johnhume1 Před rokem

      @@CastorTroy666 I built the side panels as in the original and substituted 2 tan plates for the light bluish gray plates that would've been used, then mostly hid those in several ways, though not entirely.

    • @CastorTroy666
      @CastorTroy666 Před rokem

      @@johnhume1 nice, sounds like a good solution! do you post pictures on instagram?

    • @bdo7765
      @bdo7765 Před rokem

      Actually, they DO fold the right amount... but you have to give them a little encouragement. It may feel wrong to force it, but just keep folding 'em. You will feel / hear two separate little "pops" as the tops of the studs scoot over the rail of the next piece, and then it will look just right! Maybe give it a little squeeze from the sides afterward just to make sure nothing is loose.

    • @johnhume1
      @johnhume1 Před rokem

      @@bdo7765 just tested this. It results in the black 2x1s on the center panels pulling out ever so slightly. If I then squeeze them back into full engagement with the gray panel underneath, the angled panel pops back out to not-angled-enough.

  • @PrototypePorygon137
    @PrototypePorygon137 Před rokem

    I just got the original set and it's amazing.... Looks like I have to buy another to build this alternative build. Nice

  • @jbk8218
    @jbk8218 Před rokem

    impressive!

  • @peteryt2757
    @peteryt2757 Před rokem

    i builded it yesterday and its amazing darth vader really can fit in the cockpit thanks for the alternate build

  • @Cuz_whynot173
    @Cuz_whynot173 Před 6 měsíci

    Wonderful work but one slight problem, these instructions are worse than my grandpas respiratory system 💀💀💀

  • @OldNSurly
    @OldNSurly Před rokem

    Would love to get my hands on the instructions and try this build, great job!

    • @TheBrixHub
      @TheBrixHub  Před rokem +1

      Thanks! The tutorial at the end is probably your best shot at it :)

  • @carlosalbertocoelhojr7560
    @carlosalbertocoelhojr7560 Před 10 měsíci

    Alguém conseguiu adaptar o acesso a cabine, fazendo com que abrisse a cabine? Não gostei dessa maneira de ter que tirar a peça pra poder colocar o Vader. Mas o MOC ficou muito show.

  • @limerickorange3218
    @limerickorange3218 Před rokem +1

    Step 96 is making no sense no matter which way i put it

  • @ashtonmckee6073
    @ashtonmckee6073 Před rokem +1

    i do not have a 4 by 8 light grey

    • @peteryt2757
      @peteryt2757 Před rokem +2

      its in the set but by that little bomb carrier

  • @user-jq1eo9nq2l
    @user-jq1eo9nq2l Před 10 měsíci

    96 is you leave the wings like the original build

  • @huisteven3220
    @huisteven3220 Před rokem

    Thx for the instructions. May I ask will I need extra Lego piece to build the Tie ? Or I just have one 75347 set will be enough to build ?

    • @Dratlaix
      @Dratlaix Před rokem

      One set will be enough, I just built it

  • @tater_gt
    @tater_gt Před 3 měsíci

    Erm why are there like four hundred extra pieces

  • @dougpopson5734
    @dougpopson5734 Před rokem

    What about that xwing. Although build for it?

  • @certifiedcringe5005
    @certifiedcringe5005 Před rokem +1

    algorithm bump! :DD

  • @DemonicDread
    @DemonicDread Před 11 měsíci

    My kid will love it but vader didn't fit in the build without raising the roof 1 stud higher

  • @lautaroromero9986
    @lautaroromero9986 Před rokem

    Can You do LEGO mini famale muto from Godzilla 2014

  • @Törkischer_törke
    @Törkischer_törke Před 8 měsíci

    Why do i not have that first part😭

  • @aadensarabia8097
    @aadensarabia8097 Před rokem

    I gave up on the wings and just used the build from the official set💀

  • @cts9254
    @cts9254 Před rokem

    I'm guessing you also had to use the pieces from the Imperial Gonk Droid and that ammunition cart in order to build the TIE Advanced, right? ¯\_(ツ)_/¯

    • @Dratlaix
      @Dratlaix Před rokem

      Nope,he didn’t (I just built it)

  • @mapbot4747
    @mapbot4747 Před rokem

    Can you create lego zilla?