BMW E46 325xi Driveshaft Center Bearing Replacement
Vložit
- čas přidán 11. 04. 2021
- Today, we take a look at why our E46 is vibrating at specific speeds in specific gears, but alas, we find that the problem is quite common! We do before tests, replacement, and then an after test!
Center Bearing P/N: 26121229317
www.fcpeuro.com/products/bmw-...
Please consider subscribing!!
czcams.com/users/Garageaholic?...
Take a look at my growing IG and FB!
/ garageaholic
/ garageaholic
For more information about what I do and who I am, visit:
www.garageaholic.build
E30 & E36 N54 Swap Guides available for purchase!
garageaholic.build/product-ca... - Auta a dopravní prostředky
![[Eng Sub] BMW E46 Flex disc (guibo) and drive shaft center support bearing replacement DIY](http://i.ytimg.com/vi/cUH9_4Zm9Xg/mqdefault.jpg)
this was EXACTLY the video i was looking for. love you energy and work ethic that went into this video! earned a sub for sure, thanks for the great tips man!
Thank you Shane. More great content coming soon!
Same here, replaced the carrier, exh gaskets and guibo today thanks to this video. It’s the same on 330xi
Great fix Frank. Glad you mentioned the spline orientation and preloading the centre bearing. Dutch regards, Nico.
Congratulations fellow tinkerers you have found the best CZcams video for this replacement
Great video. I have the same problem. Will fix now. Nice explanations, tips and good angles.
The only video ive seen that mentions preloading the bearing!
This video has put my mind at ease a little. I’m about to lay on my back in my drive way to do this job on my 01’ 330xi. Cheers!
Was nervous about the preload part but simple! Great vid!
Nice job Frank 👍
Very good explanation and good mark alignment on the drive shaft to see thanks you my friend.👍👍💪💪
Perfect Explained and Perfect Done! 👍
Glad it helped!
A very nice instruction! Thank you sir!
Frank, great video. Why didn't you swap the guibo too? I have the same issue, but mine is an auto transmission, glad someone did a video on a xi!
Thank you I had same problem in my BMW 330 xi.
Another silky-smooth video!!🤣🤣
Carlos!!!!
Bout to do my 330i mine started thumping guibo looked good but I’m do it anyway too
Frank, mate awesome video, helped me heaps. I'd buy you a beer if I could. Cheers mate. Vince
What’s the push rod torque specs for the rear support bar can’t find anything on the website. I own a 2003 330xi
Random question but what transmission is on that car in the video ? Just swapped a ZF trans on my ‘00 325 and now I don’t know what driveshaft to get
Could this also be the cause of shaking when driving off from a stop?
What are the torque specs on those 2 subframe bolts?
I just did mine, put it all back together, and has a bad vibration in it. i lined up the shaft
with the white painted marks on the shaft. I'm totally puzzled what i could of done wrong.
THX.
Ran it on the lift. looks like the driveshaft has a wobble in it. Think the drive shaft could be bent?
@@zigo1965 ever solve? Sounds like that may have been the issue causing the bearing to go bad in the first place
@@confettier yes, I had the bearing bracket upside down, you need to have the top of the bracket pointing up towards the car body.
I bought a new driveshaft, on the original one, the u-joint was rusted up and frozen. that’s what caused the bearing to go bad. I have had no problems since I fixed it.
My friend just bought a 330xd e46 and he have the same problem, but when we got to the driveshaft, the center bearing was looking very nice, but the yoke just behind it was locked solid one one axis, do you think that this can cause the same problem ? Problem is under heavy acceleration like yours
Absolutely. A bad u joint can definitely cause vib under acceleration!
Yeah ! I hope that this will fix his car ! Thank you ! :)
Hello, why is so important to preload bearing? What problems will have if not?
It's not imperative. It's per the OEM practices. I've done preload and then no preload - No discernible difference
@@Garageaholic i have replaced csb and guibo, and now there is vibrations only on heavy acceleration after that. I make a test with another driveshaft and without good result. I replace the guibo again and vibrations gone. After 20km the vibration come again more and more stronger. I alighn the arrows correct and i was wondering about the preload, becouse i have not do preload. First guibo was Febi, and the second one is gs-p. Maybe they are fake, and both are too soft and bend too much. Now i have ordered a OEM guibo. Can you help me if i'm missing something that couse the vibrations. I appreciate your help.
Think I've got this on my m3
Great video
In my case a 2004 325i automatic transmission, a bad bearing , but the drive shaft u joint are so bad
Hey Frank!!! I have the same vibration and howling noise problem. The problem occurs at high speeds above 120 km/h. My car becomes very loud and a weird vib starts coming from the rear end. I have taken it to a few mechanics but no one figured it out (One of the guy said it's an old car it will make this noise :D ). Can you please help me out with this one? Thanks
Bad driveshaft or needs a wheel/tire balance!
@@Garageaholic thanks for the help. I will add a few things to make it even clear.
It gets even louder when you lift your foot off the gas and it's louder till almost 100km/h.
I balanced the wheels and even changed them (new set of rims and tires)
can it be the dif? or it is the driveshaft?
That whine is definitely coming straight from the diff, but really wouldn’t give you that speed-dependent vibration. Looks like you have a combination of issues. Start with that diff (get new bearings and re shimmed)
I have the same issue, have you figured out the problem yet?
Late reply but i got the same issue, changed diffs and axles and it improved (my diff was shot from abuse :D) but the vibration remains, it also remains after putting the car in neutral. It's 100% the driveshaft, possibly a ujoint because the CSB is new. I'm getting a replacement driveshaft because spare parts are cheap here in Spain.
Also known as a carrier bearing
Has the new bearing failed you ?
Nope it’s still good
1 repair down, 10 to go... Sounds about right with an old BMW 😂...
Right?
Better change those diff and trans bushings too or it's gonna be broke in 2500 miles again.
7k miles have accrued. No issues