100 Watt OMtech Laser Unboxing and Review
Vložit
- čas přidán 5. 09. 2024
- Unboxing and reviewing the features and layout of my new 100 Watt OMtech laser. This laser has a 24”x40” cut area and the power to really kick up the cut speeds.
Laser Blog:
beardedbuildsc...
Socials:
beardedbuildsco
Facebook.com/beardedbuildsco
Affiliate Link:
OMTech Lasers:
omtechlaser.co...
Affiliate code “LASERGUYS”
Coupon code “LASERGUYS5OFF”
Great Video, For anyone that is watching it is HIGHLY recommended to use a chiller on any tube that is 100 Watts and up especially if your going to do a lot of cutting. Most companies including OMTech will not warranty the tube unless you have proof of a compressor water chiller.
Thanks for the video, did you ever remove that lower tray?
the noise when you opened it was so futuristic feeling
This came two days too late for me, but great video! I am working on a little unboxing video myself of the 100W Red & Black OMTech.
@Mark Adams - it went great! That was the easiest part of this laser business!
That’s the one I’ve been looking at. Can I ask what made you choose that one over similar models like this?
The 100watt 24x40 is a great size and I would not be able to fit anything bigger. The power is awesome and has really increases my production ability.
@@roaminrabbitt - Honestly, I finally felt ready and it was one of the few in stock (on OMTech's website.) I was originally looking at an 80W with a larger bed but it was out of stock. Then I thought about the much smaller 50W just to see if lasering was even going to be a good fit for me. Then I thought, well, if it is, I may as well have some power and bought the 100W. I have the red and black though, which has a smaller bed (20x28) than Bearded Builds Co. I would love to have that larger bed now but mine has a pass through so I will be able to do larger things using that. I am very happy with my purchase!
@@BeardedBuildsCo with this laser, did you figure a way to still use the rotary and do tumblers? Will it go low enough to allow room?
Have this machine ordered can't wait to start working with it. Also plan on doing a learn with me CZcams channel. This is my first laser and will be doing a lot of leather work. Fig go big so i can grow into it. Thanks for the videos.
I have its bigger brother, a 1200 by 900mm. I'm setting it up as I watch!
Wicked, that's what my wife's running!
Putting a beautiful door and also functional
Thanks for the walk-around. I look forward to seeing it in action soon.
There was a clear packing tape on the laser tube. We have to remove that before use right?
Hi,
First I would like to thank you for putting up the helpful videos on using and adjusting the OMTech laser. I have aligned my mirrors, performed a ramp test, adjusted the autofocus on my machine and it will cut and etch properly when it carries out the instructions sent from Lightburn through the USB. There is an issue that I am running into that is costing me a lot of wasted material and time and I hope you can help me solve this. As an example, if I pull up a file of a circle or anything in Lightburn and send it to my laser, it will usually cut the file to perfection on the first time when I run it, however; if I send the file to the laser to cut the same file again, the laser will often start the cut inside the circle and cut a short straight line out to the edge of the circle then proceed to cut the outside path of the circle and stop before the circle has been “closed” or completed. The panel on my 100 watt machine(Ruida Panel) shows the complete circle with no such error. It’s as if the laser is not following the file instructions on additional cuts. Any help will be greatly appreciated. For the record I have subscribed to your channel and the information that you are posting is very help to those of us that are just getting started. I love my machine, I just need to get it to work consistently so that it will be of practical use to me. Thanks!
Thanks for the video, looking forward to more videos.
I looks so big. Mine is even bigger (130watt) still waiting for it to come.
Did you ever receive it? And would you recommend it? Looking at the 130 watt aswell. Thanks
So video on how to disable the beep coming soon I assume? :) BTW is the exhaust 6" or 8"? Just ordered my 80w 36x24 unit trying to make sure I get the right size exhaust fan before it gets here. Also on you're cw 5200 chiller what temperature do you typically set it to run at?
Hi,
I have watched your videos and appreciate the effort you put into helping others that are new to this. I’ve been using my laser very successfully for about 8 months now with no problems until this morning and I wanted to reach out and see if you had any advice?
I loaded a file into Lightburn on my computer(Windows10) as I normally would and “framed” the cuts over the material. When I hit the start button, my laser went to the first fill position(a tiny circle) then stopped and would go no farther with the cut, etc. I rebooted my laser, my computer, and changed the USB cable connecting the computer to the laser and no change resulted. I did get a message at one point on the computer that said “The Laser does not appear to be connected to your computer”. If there is anything you know that might help, please share. I can’t produce anything that is ordered until this is resolved. Thank you so much in advance.
Thank you soooo much. I just ordered this model today! This is a beast! How loud is it? Does the chiller make noice? I’m putting an in-line fan on so can you turn the internal fan off to quiet it (like a Glowforge) ?
for rotary says remove honey comb and bars, where do you put thre rotary, If i put it on the try it dose not reach
facebook.com/groups/1364016877267714/permalink/1404656599870408/?mibextid=W9rl1R
Do you have a video on how you leveled the bed on your 100 autofocus? if not can you tell me how you did it? I loosened the motor on mine and slid it forward, however when putting the chain back on and tightening it up something got out of wack again. I was hoping there was an easier way? Thank you
Congratulations
I noticed when you looked at your laser tube there was some clear tape stuck to it
So did you take off this tape or leave it on
Just left it because it doesn’t affect the tube and if I pulled it off it would tear off the label for the tube specifics.
Thanks for the Video. Question, we live in Canada how do these fair in the cold weather and then through the hot summer weather ? I would need to keep this in the garage through the winter
Thank you for the excellent video. I am aware that this was made last year but I would like to ask you a question why OM Tech refer to some of its machines as "engraver" vs. "cutter"? To me a 80 or 100-watt laser machine should be able to both cut and engrave so why is it referred to as "engraver" only?
The is no rhyme or reason for it. All of the co2 machines can cut and engrave. It just depends on the thickness of the material and power of the laser.
Just received my Omtech 100w CO2 and after setup I have a double beam while running the test file. I have a support ticket already submitted and waiting on a reply. The split looks like a Tem01 mode and I am wondering if the tube could have been damaged during transport or am I just missing something simple?
Is that split beam a test coming straight from the tube to mirror one?
Are you using at least 20% power on the controller to perform your pulses?
I subscribed to your channel. you're very informative. I have a 100 w laser from omtech as well...question? when not operating my laser...do I need to keep my 5200 chiller on. My laser is in my garage and I live in Texas
Does this machine handle thin materials as well? Like different Kinds of craft paper? I heard somewhere, that you might not be able to turn the laser lower than 10% in strength?
You can choose a higher speed. You'll want to experiment til you get the results you want
Hi,
Thank you for your helpful videos. I have this exact same laser and have had some issues with it but most have been resolved at this point as far as I can tell. I still get a weird error cut initially on most every file unless I first send my laser to fill in a tiny circle I add to the file being cut. It usually does exactly what it should do from that point on. I guess I am tricking it into cooperating on the file...lol. What I wish to know is at 10:03 in your video you point to what you describe as a power supply. My question is does the little fan in this unit constantly run on your laser? It does on mine and seems to be making enough sound that it is noticable. I am not sure if this is normal or not but since you have the exact same machine I am hoping you can answer this for me. Thank you so much for your help thus far.
@Beardedbuldsco Thanks for the video, did you ever remove that lower tray?
I did not but I have seen several people that have.
Awesome video! I just got the 80W version at work, and I'm confused about the mA readout on the left hand side on top. It has a dial, is this an actual power adjustment, or does it strictly just work as an ammeter? The instructions were fairly vague on that.
Turn that dial to max and never touch it again.
Did you ever remove the catch funnel on this laser?
When cutting materials like wood abs acrylic, is there a bad smell or a hug fume smell?
Nice take on the laser.. Im looking for a laser for my basement shop. Do you think this machine could be disassembled small enough to get through a 32" door and down to my basement shop? I had to dismantle my cnc router to make it light enough and manageable to move.
Thanks for any input.
I doubt it. Shop near me has one and there's no real dismantling it easy. Its also a solid 400lbs lol
is it an engraver and cutter laser and how different is it to other companies.
You work for OMTECH now? Sweet
Nah, I am an affiliate though.
@@BeardedBuildsCo Awesome.
10 months later............Do you wish you would have gotten the Omtech 130 ??
I am tossed between the 100 and 130.........do I really need to be able to cut 12mm acrylic?
I own a sign shop and feel I might need to do 12mm or 15mm acrylic and other substraights
Yes! For the additional cut speed and extra bed space. With the 130 it can take a full width of 4x8 ply.
How big of a part in the z direction can you load in?
I don't have a laser but would like too. Can anyone tell me why I don't see a lot of people with Laguna Lasers. Are they not any good. I considered Laguna when shopping for a cnc but opted for a Shop Sabre. I felt the Laguna was good but I wanted better.
They are expensive compared to other options
Why do you need an ammeter?
How’s your machine going on! Is there any problem u occurred once.
Will it separate from the base to get through a 30" door? I know on the smaller Red/Black one you could split, but this one appears to have a seam just not sure you can separate it.
You cannot separate it like the 2028 size. I have seen people take them apart but it is a total overhaul.
What's the total Amp draw running this thing at full power? I plan on getting the 80w and the water chiller since it gets super hot here where I am. Having trouble tracking down any real world numbers.
Do you use both power cords in America?
Yes, each cord is wired to power separate components but I plug both into the same power strip.
I have just received my OMTech 100 watt laser that is the same model as yours. I have the Chiller, I have purchased the better in-line fan w/ duct, and Lightburn software. I am having a very difficult time of getting this thing up and running. I have yet to make a single cut but I have gotten it to engrave so I know it will function. I’m new to this so any help or tips would be greatly appreciated.
facebook.com/groups/1364016877267714/permalink/1405296166473118/?mibextid=W9rl1R
I’ve only had this machine one day now but I actually got my laser running and figured out enough of Lightburn to make a few test engravings, etc. I noticed that on some of the test pieces there was a very faint “ghost image” or shadow. I wonder if there is an alignment issue with the mirrors or tube?What should the setting be for the knob at the top left front of this machine? It simply shows Min. to Max. This may be an ammeter but I’m not sure as I’ve not found any information in the manual yet.
Set that knob to max and leave it there. Did you go to the link I shared? This is a full setup guide.
@@BeardedBuildsCo Thanks again for your help and the link provided. I don’t do Facebook but I will have to get signed back up because a group dedicated to this will certainly be a great help to a novice like me.
Do you have any videos on how to align mirrors and nozzle with auto focus I keep getting split beams and a thick line not sure what I'm doing wrong! I have a 130 watt been messing with it for 3 weeks literally.
Call your factory engineer. you'll have to do it at night since they are in China.
Thanks for posting this. Does OMtech offer any service in the US? Perhaps even just phone or chat service? Been looking at some but not sure about support after the initial sale. Thanks for any input you might have on this point!
If you purchase direct through the omtech website there is US based customer service by phone and email. Side note there is currently a 5% off discount tied to our affiliate code LASERGUYS through the end of July.
@@BeardedBuildsCo great. thanks!
Awesome! Looking to purchase the same one(I'll use your affiliate). Before I jump the gun, do you feel the 100w is too powerful for some engravings? I've read it might not drop enough in power or be consistent when it is at lower power. Whats your experience with that?
I have had no issues with engraving. I just did some engravings on some gun stocks. It’s on my Instagram.
instagram.com/beardedbuildsco
Do you plan on adding leds to this machine?
Would I need to purchase both lightburn and coreldraw?
I really only recommend lightburn. If you have another program where you are creating vector files, then keep using that.
@@BeardedBuildsCo Thank you for responding so quickly im barely starting off so I'm kind of lost right now. I'm purchasing my machine today and it suggested both lightburn and coreldraw but I didn't want to pay the almost 400 for coreldraw if I didn't need to.
Which machine are you looking at?
This is my NEEDS AND WANTS list.
Upgrades
NEEDS:
-Lightburn
-I always recommend an inline fan for improved exhaust as the number 1 upgrade to do out the gate.
amzn.to/3itFCFl
WANTS:
-Chiller is a big deal if you are going to be doing long run times and you don’t want to manage water temps by hand.
omtechlaser.com/collections/accessories/products/6l-water-chiller-lcw-5200-us?ref=jnnfdsk4edqe
-Air assist - this really comes in key when you are trying to to get the best cut possible with minimal residue. I made a video and linked everything you might need in the description.
Upgraded Air Assist for Chinese | OM Tech CO2 Laser czcams.com/video/y08B1v8-q-c/video.html
Everything the you absolutely need to get started comes with the machine. All of these items make improvements on what comes stock.
@@BeardedBuildsCo Thank you so much im going to look into all that now. I'm wanting to get the 60W CO2 LASER ENGRAVER CUTTING MACHINE WITH 20” X 28” WORKING AREA (WITH AUTO FOCUS) . This is the machine I want to start with maybe as time goes and I learn more I can upgrade to a 100w machine.
That’s awesome! That’s the machine I started with! Use the service code BEARDEDBUILDS in the promo/discount area if you feel that my videos and answer have been helpful.
I have a question 🙋♂️ Will the beast fit through a 36” man door?
If you take off the casters, feet, and all the buttons on top the height of the machine is about 34 1/4”. You would have to turn the machine on its back to even attempt it. I won’t guarantee anything because there are so many factors to take into account.
@@BeardedBuildsCo thank you for the reply, I just built a nice shed that I have all my craft stuff in like my ORTUR laser and my vinyl cutters now I want to upgrade to a bigger laser. Man that thing is a beast.
How would you take the whole tray thing out? I would like to do the same to my next laser
There are tack welds that hold the tray on to the table and I would just cut them with a grinder.
@@BeardedBuildsCo Awesome like a cutoff tool? I got one of those. I'll keep that in mind when I get my new laser. I'd rather have the bed be able to go down fully. I'll clean my own mess. Shop vac to the rescue
Yep!
@@BeardedBuildsCo thanks for clearing that up. I look forward to purchasing one of these one day. Currently have an OMTech k40
do i need to purchase the aerosol can?
how was this overall journey? I just bought the 150w laser from them AF series...what do you recommend that will make it perform potentially at an even higher level? lenses? better exhaust systems?
Frustrated slightly since the chat program is useless and I called on the phone and they told me to send an email about a month ago and I still haven't heard back from them whatsoever.
I have had a great experience but I have had prior laser experience. The biggest hurdle for most is alignment and understand what is a good alignment and how to achieve it.
I am currently looking at the 130 watt OMTech laser for the 50" wide bed, what sort of upgrades do you suggest?
I also sent you this list in a DM
Upgrades
NEEDS:
-Lightburn
-I always recommend an inline fan for improved exhaust as the number 1 upgrade to do out the gate.
omtechlaser.com/collections/accessories/products/loudline-s6-inline-duct-fan-system-usr-cls6-us/?ref=LGS
WANTS:
-Chiller is a big deal if you are going to be doing long run times and you don’t want to manage water temps by hand.
omtechlaser.com/collections/accessories/products/6l-water-chiller-lcw-5200-us?ref=LGS
-Air assist - this really comes in key when you are trying to to get the best cut possible with minimal residue. I made a video and linked everything you might need in the description.
Upgraded Air Assist for Chinese | OM Tech CO2 Laser czcams.com/video/y08B1v8-q-c/video.html
Everything the you absolutely need to get started comes with the machine. All of these items make improvements on what comes stock.
how do you change the lens on the 100 w
do you think I can do ammo cans with this?"
Yep! Any of the co2 lasers could do the metal coated/painted ammo cans. The thing you want to check is the z clearance.
That’s was I was Wondering was about the clearance this is the exact laser I was interested in. I think As long as it has more then 6” of clearance I’ll be good. Thanks for the reply!
Nice video is this the AF2440-100?
Yep! This is the one.
omtechlaser.com/products/100w-co2-laser-engraver-cutter-usb-1060-us?sca_ref=2167995.GmKRkcJ7oO
@@BeardedBuildsCo Yea I ordered one last night. How has it held up?
@@RonMarshallrone I use it almost every day
@@BeardedBuildsCo I Will be to my xtool paid for itself in three weeks so hoping to use this OMtech for my furniture making business and tons of smalls. Thanks man I've learned a ton already off your vids. Watching the lightburn stuff now.
what are the additional cost beyond the list price? what was the cost to your door?
Shipping with lift gate service is included in the price.
Does this break down or come off a stand in any way that will allow it to fit through a normal 35" door?
This one does not
This isn't a review. It's just an unboxing and inspection.
Here is the review... it’s awesome! It has more than doubled my production and it has been able to tackle all the project that I have thrown at it. The bigger bed has been a game changer and I wish I would have started with this machine.
That won't fit through a door will it?
If you take the casters and buttons off the top it is 34 1/4” tall.
6" exhaust port?
Yes
@@BeardedBuildsCo I'm sold buddy. You think it'll be an issue to scale the 100 watts power down to 20-30ish % in order to cut and engrave 1.5mm leather patches? Thanks again for all your help!
@RealDustyChandler nope. Look at my other video on the leatherette patches that I make.
@RealDustyChandler remember to get your discount and support my channel by using the code BEARDEDBUILDS5OFF
@@BeardedBuildsCo I gotcha buddy. I just watched that video right after I posted that. I'm also going to do the CA air tools upgrade and I'll use your affiliate links. Thanks again buddy! You sold me on OMTECH!
You must have chili cooler
I bought one of these, What a piece of Shit. So many manufacturing defects and broken parts. So bad that I sent it back. Don't buy OMtech lasers.